#ifndef _ASM_STACKFRAME_H
#define _ASM_STACKFRAME_H
-#include <linux/config.h>
#include <linux/threads.h>
#include <asm/asm.h>
+#include <asm/asmmacro.h>
#include <asm/mipsregs.h>
#include <asm/asm-offsets.h>
+#ifdef CONFIG_MIPS_MT_SMTC
+#include <asm/mipsmtregs.h>
+#endif /* CONFIG_MIPS_MT_SMTC */
+
.macro SAVE_AT
.set push
.set noat
#ifdef CONFIG_SMP
.macro get_saved_sp /* SMP variation */
#ifdef CONFIG_32BIT
+#ifdef CONFIG_MIPS_MT_SMTC
+ .set mips32
+ mfc0 k0, CP0_TCBIND;
+ .set mips0
+ lui k1, %hi(kernelsp)
+ srl k0, k0, 19
+ /* No need to shift down and up to clear bits 0-1 */
+#else
mfc0 k0, CP0_CONTEXT
lui k1, %hi(kernelsp)
srl k0, k0, 23
- addu k1, k0
- LONG_L k1, %lo(kernelsp)(k1)
#endif
-#if defined(CONFIG_64BIT) && !defined(CONFIG_BUILD_ELF64)
- MFC0 k1, CP0_CONTEXT
- dsra k1, 23
- lui k0, %hi(pgd_current)
- addiu k0, %lo(pgd_current)
- dsubu k1, k0
- lui k0, %hi(kernelsp)
- daddu k1, k0
+ addu k1, k0
LONG_L k1, %lo(kernelsp)(k1)
#endif
-#if defined(CONFIG_64BIT) && defined(CONFIG_BUILD_ELF64)
+#ifdef CONFIG_64BIT
+#ifdef CONFIG_MIPS_MT_SMTC
+ .set mips64
+ mfc0 k0, CP0_TCBIND;
+ .set mips0
+ lui k0, %highest(kernelsp)
+ dsrl k1, 19
+ /* No need to shift down and up to clear bits 0-2 */
+#else
MFC0 k1, CP0_CONTEXT
lui k0, %highest(kernelsp)
dsrl k1, 23
dsll k0, k0, 16
daddiu k0, %hi(kernelsp)
dsll k0, k0, 16
+#endif /* CONFIG_MIPS_MT_SMTC */
daddu k1, k1, k0
LONG_L k1, %lo(kernelsp)(k1)
-#endif
+#endif /* CONFIG_64BIT */
.endm
.macro set_saved_sp stackp temp temp2
#ifdef CONFIG_32BIT
+#ifdef CONFIG_MIPS_MT_SMTC
+ mfc0 \temp, CP0_TCBIND
+ srl \temp, 19
+#else
mfc0 \temp, CP0_CONTEXT
srl \temp, 23
- LONG_S \stackp, kernelsp(\temp)
#endif
-#if defined(CONFIG_64BIT) && !defined(CONFIG_BUILD_ELF64)
- lw \temp, TI_CPU(gp)
- dsll \temp, 3
- lui \temp2, %hi(kernelsp)
- daddu \temp, \temp2
- LONG_S \stackp, %lo(kernelsp)(\temp)
#endif
-#if defined(CONFIG_64BIT) && defined(CONFIG_BUILD_ELF64)
+#ifdef CONFIG_64BIT
+#ifdef CONFIG_MIPS_MT_SMTC
+ mfc0 \temp, CP0_TCBIND
+ dsrl \temp, 19
+#else
MFC0 \temp, CP0_CONTEXT
dsrl \temp, 23
- LONG_S \stackp, kernelsp(\temp)
#endif
+#endif
+ LONG_S \stackp, kernelsp(\temp)
.endm
#else
.macro get_saved_sp /* Uniprocessor variation */
+#ifdef CONFIG_64BIT
+ lui k1, %highest(kernelsp)
+ daddiu k1, %higher(kernelsp)
+ dsll k1, k1, 16
+ daddiu k1, %hi(kernelsp)
+ dsll k1, k1, 16
+#else
lui k1, %hi(kernelsp)
+#endif
LONG_L k1, %lo(kernelsp)(k1)
.endm
PTR_SUBU sp, k1, PT_SIZE
LONG_S k0, PT_R29(sp)
LONG_S $3, PT_R3(sp)
+ /*
+ * You might think that you don't need to save $0,
+ * but the FPU emulator and gdb remote debug stub
+ * need it to operate correctly
+ */
LONG_S $0, PT_R0(sp)
mfc0 v1, CP0_STATUS
LONG_S $2, PT_R2(sp)
LONG_S v1, PT_STATUS(sp)
+#ifdef CONFIG_MIPS_MT_SMTC
+ /*
+ * Ideally, these instructions would be shuffled in
+ * to cover the pipeline delay.
+ */
+ .set mips32
+ mfc0 v1, CP0_TCSTATUS
+ .set mips0
+ LONG_S v1, PT_TCSTATUS(sp)
+#endif /* CONFIG_MIPS_MT_SMTC */
LONG_S $4, PT_R4(sp)
mfc0 v1, CP0_CAUSE
LONG_S $5, PT_R5(sp)
.endm
#else
+/*
+ * For SMTC kernel, global IE should be left set, and interrupts
+ * controlled exclusively via IXMT.
+ */
+#ifdef CONFIG_MIPS_MT_SMTC
+#define STATMASK 0x1e
+#else
+#define STATMASK 0x1f
+#endif
.macro RESTORE_SOME
.set push
.set reorder
.set noat
+#ifdef CONFIG_MIPS_MT_SMTC
+ .set mips32r2
+ /*
+ * This may not really be necessary if ints are already
+ * inhibited here.
+ */
+ mfc0 v0, CP0_TCSTATUS
+ ori v0, TCSTATUS_IXMT
+ mtc0 v0, CP0_TCSTATUS
+ ehb
+ DMT 5 # dmt a1
+ jal mips_ihb
+#endif /* CONFIG_MIPS_MT_SMTC */
mfc0 a0, CP0_STATUS
- ori a0, 0x1f
- xori a0, 0x1f
+ ori a0, STATMASK
+ xori a0, STATMASK
mtc0 a0, CP0_STATUS
li v1, 0xff00
and a0, v1
and v0, v1
or v0, a0
mtc0 v0, CP0_STATUS
+#ifdef CONFIG_MIPS_MT_SMTC
+/*
+ * Only after EXL/ERL have been restored to status can we
+ * restore TCStatus.IXMT.
+ */
+ LONG_L v1, PT_TCSTATUS(sp)
+ ehb
+ mfc0 v0, CP0_TCSTATUS
+ andi v1, TCSTATUS_IXMT
+ /* We know that TCStatua.IXMT should be set from above */
+ xori v0, v0, TCSTATUS_IXMT
+ or v0, v0, v1
+ mtc0 v0, CP0_TCSTATUS
+ ehb
+ andi a1, a1, VPECONTROL_TE
+ beqz a1, 1f
+ emt
+1:
+ .set mips0
+#endif /* CONFIG_MIPS_MT_SMTC */
LONG_L v1, PT_EPC(sp)
MTC0 v1, CP0_EPC
LONG_L $31, PT_R31(sp)
* Set cp0 enable bit as sign that we're running on the kernel stack
*/
.macro CLI
+#if !defined(CONFIG_MIPS_MT_SMTC)
mfc0 t0, CP0_STATUS
li t1, ST0_CU0 | 0x1f
or t0, t1
xori t0, 0x1f
mtc0 t0, CP0_STATUS
+#else /* CONFIG_MIPS_MT_SMTC */
+ /*
+ * For SMTC, we need to set privilege
+ * and disable interrupts only for the
+ * current TC, using the TCStatus register.
+ */
+ mfc0 t0,CP0_TCSTATUS
+ /* Fortunately CU 0 is in the same place in both registers */
+ /* Set TCU0, TMX, TKSU (for later inversion) and IXMT */
+ li t1, ST0_CU0 | 0x08001c00
+ or t0,t1
+ /* Clear TKSU, leave IXMT */
+ xori t0, 0x00001800
+ mtc0 t0, CP0_TCSTATUS
+ ehb
+ /* We need to leave the global IE bit set, but clear EXL...*/
+ mfc0 t0, CP0_STATUS
+ ori t0, ST0_EXL | ST0_ERL
+ xori t0, ST0_EXL | ST0_ERL
+ mtc0 t0, CP0_STATUS
+#endif /* CONFIG_MIPS_MT_SMTC */
irq_disable_hazard
.endm
* Set cp0 enable bit as sign that we're running on the kernel stack
*/
.macro STI
+#if !defined(CONFIG_MIPS_MT_SMTC)
mfc0 t0, CP0_STATUS
li t1, ST0_CU0 | 0x1f
or t0, t1
xori t0, 0x1e
mtc0 t0, CP0_STATUS
+#else /* CONFIG_MIPS_MT_SMTC */
+ /*
+ * For SMTC, we need to set privilege
+ * and enable interrupts only for the
+ * current TC, using the TCStatus register.
+ */
+ ehb
+ mfc0 t0,CP0_TCSTATUS
+ /* Fortunately CU 0 is in the same place in both registers */
+ /* Set TCU0, TKSU (for later inversion) and IXMT */
+ li t1, ST0_CU0 | 0x08001c00
+ or t0,t1
+ /* Clear TKSU *and* IXMT */
+ xori t0, 0x00001c00
+ mtc0 t0, CP0_TCSTATUS
+ ehb
+ /* We need to leave the global IE bit set, but clear EXL...*/
+ mfc0 t0, CP0_STATUS
+ ori t0, ST0_EXL
+ xori t0, ST0_EXL
+ mtc0 t0, CP0_STATUS
+ /* irq_enable_hazard below should expand to EHB for 24K/34K cpus */
+#endif /* CONFIG_MIPS_MT_SMTC */
irq_enable_hazard
.endm
* Set cp0 enable bit as sign that we're running on the kernel stack
*/
.macro KMODE
+#ifdef CONFIG_MIPS_MT_SMTC
+ /*
+ * This gets baroque in SMTC. We want to
+ * protect the non-atomic clearing of EXL
+ * with DMT/EMT, but we don't want to take
+ * an interrupt while DMT is still in effect.
+ */
+
+ /* KMODE gets invoked from both reorder and noreorder code */
+ .set push
+ .set mips32r2
+ .set noreorder
+ mfc0 v0, CP0_TCSTATUS
+ andi v1, v0, TCSTATUS_IXMT
+ ori v0, TCSTATUS_IXMT
+ mtc0 v0, CP0_TCSTATUS
+ ehb
+ DMT 2 # dmt v0
+ /*
+ * We don't know a priori if ra is "live"
+ */
+ move t0, ra
+ jal mips_ihb
+ nop /* delay slot */
+ move ra, t0
+#endif /* CONFIG_MIPS_MT_SMTC */
mfc0 t0, CP0_STATUS
li t1, ST0_CU0 | 0x1e
or t0, t1
xori t0, 0x1e
mtc0 t0, CP0_STATUS
+#ifdef CONFIG_MIPS_MT_SMTC
+ ehb
+ andi v0, v0, VPECONTROL_TE
+ beqz v0, 2f
+ nop /* delay slot */
+ emt
+2:
+ mfc0 v0, CP0_TCSTATUS
+ /* Clear IXMT, then OR in previous value */
+ ori v0, TCSTATUS_IXMT
+ xori v0, TCSTATUS_IXMT
+ or v0, v1, v0
+ mtc0 v0, CP0_TCSTATUS
+ /*
+ * irq_disable_hazard below should expand to EHB
+ * on 24K/34K CPUS
+ */
+ .set pop
+#endif /* CONFIG_MIPS_MT_SMTC */
irq_disable_hazard
.endm