#include <asm/cachectl.h>
#include <asm/fixmap.h>
+#include <asm-generic/pgtable-nopmd.h>
+
/*
* - add_wired_entry() add a fixed TLB entry, and move wired register
*/
* works even with the cache aliasing problem the R4k and above have.
*/
-/* PMD_SHIFT determines the size of the area a second-level page table can map */
+/* PGDIR_SHIFT determines what a third-level page table entry can map */
#ifdef CONFIG_64BIT_PHYS_ADDR
-#define PMD_SHIFT 21
+#define PGDIR_SHIFT 21
#else
-#define PMD_SHIFT 22
+#define PGDIR_SHIFT 22
#endif
-#define PMD_SIZE (1UL << PMD_SHIFT)
-#define PMD_MASK (~(PMD_SIZE-1))
-
-/* PGDIR_SHIFT determines what a third-level page table entry can map */
-#define PGDIR_SHIFT PMD_SHIFT
#define PGDIR_SIZE (1UL << PGDIR_SHIFT)
#define PGDIR_MASK (~(PGDIR_SIZE-1))
/*
* Entries per page directory level: we use two-level, so
- * we don't really have any PMD directory physically.
+ * we don't really have any PUD/PMD directory physically.
*/
#ifdef CONFIG_64BIT_PHYS_ADDR
#define PGD_ORDER 1
-#define PMD_ORDER 0
+#define PUD_ORDER aieeee_attempt_to_allocate_pud
+#define PMD_ORDER 1
#define PTE_ORDER 0
#else
#define PGD_ORDER 0
-#define PMD_ORDER 0
+#define PUD_ORDER aieeee_attempt_to_allocate_pud
+#define PMD_ORDER 1
#define PTE_ORDER 0
#endif
#define PTRS_PER_PGD ((PAGE_SIZE << PGD_ORDER) / sizeof(pgd_t))
-#define PTRS_PER_PMD 1
#define PTRS_PER_PTE ((PAGE_SIZE << PTE_ORDER) / sizeof(pte_t))
#define USER_PTRS_PER_PGD (0x80000000UL/PGDIR_SIZE)
-#define FIRST_USER_PGD_NR 0
+#define FIRST_USER_ADDRESS 0
-#define VMALLOC_START KSEG2
+#define VMALLOC_START MAP_BASE
#ifdef CONFIG_HIGHMEM
# define VMALLOC_END (PKMAP_BASE-2*PAGE_SIZE)
#define pte_ERROR(e) \
printk("%s:%d: bad pte %08lx.\n", __FILE__, __LINE__, pte_val(e))
#endif
-#define pmd_ERROR(e) \
- printk("%s:%d: bad pmd %08lx.\n", __FILE__, __LINE__, pmd_val(e))
#define pgd_ERROR(e) \
printk("%s:%d: bad pgd %08lx.\n", __FILE__, __LINE__, pgd_val(e))
pmd_val(*pmdp) = ((unsigned long) invalid_pte_table);
}
-/*
- * The "pgd_xxx()" functions here are trivial for a folded two-level
- * setup: the pgd is never bad, and a pmd always exists (as it's folded
- * into the pgd entry)
- */
-static inline int pgd_none(pgd_t pgd) { return 0; }
-static inline int pgd_bad(pgd_t pgd) { return 0; }
-static inline int pgd_present(pgd_t pgd) { return 1; }
-static inline void pgd_clear(pgd_t *pgdp) { }
-
-#if defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_CPU_MIPS32)
+#if defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_CPU_MIPS32_R1)
#define pte_page(x) pfn_to_page(pte_pfn(x))
#define pte_pfn(x) ((unsigned long)((x).pte_high >> 6))
static inline pte_t
#define pfn_pte(pfn, prot) __pte(((pfn) << (PAGE_SHIFT + 2)) | pgprot_val(prot))
#else
#define pte_pfn(x) ((unsigned long)((x).pte >> PAGE_SHIFT))
-#define pfn_pte(pfn, prot) __pte(((pfn) << PAGE_SHIFT) | pgprot_val(prot))
+#define pfn_pte(pfn, prot) __pte(((unsigned long long)(pfn) << PAGE_SHIFT) | pgprot_val(prot))
#endif
-#endif /* defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_CPU_MIPS32) */
+#endif /* defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_CPU_MIPS32_R1) */
#define __pgd_offset(address) pgd_index(address)
+#define __pud_offset(address) (((address) >> PUD_SHIFT) & (PTRS_PER_PUD-1))
#define __pmd_offset(address) (((address) >> PMD_SHIFT) & (PTRS_PER_PMD-1))
/* to find an entry in a kernel page-table-directory */
#define pgd_offset_k(address) pgd_offset(&init_mm, address)
-#define pgd_index(address) ((address) >> PGDIR_SHIFT)
+#define pgd_index(address) (((address) >> PGDIR_SHIFT) & (PTRS_PER_PGD-1))
/* to find an entry in a page-table-directory */
#define pgd_offset(mm,addr) ((mm)->pgd + pgd_index(addr))
-/* Find an entry in the second-level page table.. */
-static inline pmd_t *pmd_offset(pgd_t *dir, unsigned long address)
-{
- return (pmd_t *) dir;
-}
-
/* Find an entry in the third-level page table.. */
#define __pte_offset(address) \
(((address) >> PAGE_SHIFT) & (PTRS_PER_PTE - 1))
((swp_entry_t) { ((type) << 10) | ((offset) << 15) })
/*
- * Bits 0, 1, 2, 9 and 10 are taken, split up the 27 bits of offset
- * into this range:
+ * Bits 0, 4, 8, and 9 are taken, split up 28 bits of offset into this range:
*/
-#define PTE_FILE_MAX_BITS 27
+#define PTE_FILE_MAX_BITS 28
-#define pte_to_pgoff(_pte) \
- ((((_pte).pte >> 3) & 0x3f ) + (((_pte).pte >> 11) << 8 ))
+#define pte_to_pgoff(_pte) ((((_pte).pte >> 1 ) & 0x07) | \
+ (((_pte).pte >> 2 ) & 0x38) | \
+ (((_pte).pte >> 10) << 6 ))
-#define pgoff_to_pte(off) \
- ((pte_t) { (((off) & 0x3f) << 3) + (((off) >> 8) << 11) + _PAGE_FILE })
+#define pgoff_to_pte(off) ((pte_t) { (((off) & 0x07) << 1 ) | \
+ (((off) & 0x38) << 2 ) | \
+ (((off) >> 6 ) << 10) | \
+ _PAGE_FILE })
#else
/* Swap entries must have VALID and GLOBAL bits cleared. */
+#if defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_CPU_MIPS32)
+#define __swp_type(x) (((x).val >> 2) & 0x1f)
+#define __swp_offset(x) ((x).val >> 7)
+#define __swp_entry(type,offset) \
+ ((swp_entry_t) { ((type) << 2) | ((offset) << 7) })
+#else
#define __swp_type(x) (((x).val >> 8) & 0x1f)
-#define __swp_offset(x) ((x).val >> 13)
+#define __swp_offset(x) ((x).val >> 13)
#define __swp_entry(type,offset) \
- ((swp_entry_t) { ((type) << 8) | ((offset) << 13) })
+ ((swp_entry_t) { ((type) << 8) | ((offset) << 13) })
+#endif /* defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_CPU_MIPS32) */
+#if defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_CPU_MIPS32)
/*
- * Bits 0, 1, 2, 7 and 8 are taken, split up the 27 bits of offset
- * into this range:
+ * Bits 0 and 1 of pte_high are taken, use the rest for the page offset...
*/
-#define PTE_FILE_MAX_BITS 27
+#define PTE_FILE_MAX_BITS 30
-#if defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_CPU_MIPS32)
- /* fixme */
-#define pte_to_pgoff(_pte) (((_pte).pte_high >> 6) + ((_pte).pte_high & 0x3f))
-#define pgoff_to_pte(off) \
- ((pte_t){(((off) & 0x3f) + ((off) << 6) + _PAGE_FILE)})
+#define pte_to_pgoff(_pte) ((_pte).pte_high >> 2)
+#define pgoff_to_pte(off) ((pte_t) { _PAGE_FILE, (off) << 2 })
#else
-#define pte_to_pgoff(_pte) \
- ((((_pte).pte >> 3) & 0x1f ) + (((_pte).pte >> 9) << 6 ))
+/*
+ * Bits 0, 4, 6, and 7 are taken, split up 28 bits of offset into this range:
+ */
+#define PTE_FILE_MAX_BITS 28
+
+#define pte_to_pgoff(_pte) ((((_pte).pte >> 1) & 0x7) | \
+ (((_pte).pte >> 2) & 0x8) | \
+ (((_pte).pte >> 8) << 4))
-#define pgoff_to_pte(off) \
- ((pte_t) { (((off) & 0x1f) << 3) + (((off) >> 6) << 9) + _PAGE_FILE })
+#define pgoff_to_pte(off) ((pte_t) { (((off) & 0x7) << 1) | \
+ (((off) & 0x8) << 2) | \
+ (((off) >> 4) << 8) | \
+ _PAGE_FILE })
#endif
#endif
+#if defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_CPU_MIPS32)
+#define __pte_to_swp_entry(pte) ((swp_entry_t) { (pte).pte_high })
+#define __swp_entry_to_pte(x) ((pte_t) { 0, (x).val })
+#else
#define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) })
#define __swp_entry_to_pte(x) ((pte_t) { (x).val })
+#endif
#endif /* _ASM_PGTABLE_32_H */