/* For MMR's that are reserved on Core B, set up defines to better integrate with other ports */
#define SWRST SICA_SWRST
#define SYSCR SICA_SYSCR
+#define DOUBLE_FAULT (DOUBLE_FAULT_B|DOUBLE_FAULT_A)
+#define RESET_DOUBLE (SWRST_DBL_FAULT_B|SWRST_DBL_FAULT_A)
+#define RESET_WDOG (SWRST_WDT_B|SWRST_WDT_A)
+#define RESET_SOFTWARE (SWRST_OCCURRED)
/* System Reset and Interrupt Controller registers for core A (0xFFC0 0100-0xFFC0 01FF) */
#define SICA_SWRST 0xFFC00100 /* Software Reset register */
#define WDOGB_STAT 0xFFC01208 /* Watchdog Status register */
/* UART Controller (0xFFC00400 - 0xFFC004FF) */
-#define UART_THR 0xFFC00400 /* Transmit Holding register */
-#define UART_RBR 0xFFC00400 /* Receive Buffer register */
-#define UART_DLL 0xFFC00400 /* Divisor Latch (Low-Byte) */
-#define UART_IER 0xFFC00404 /* Interrupt Enable Register */
-#define UART_DLH 0xFFC00404 /* Divisor Latch (High-Byte) */
-#define UART_IIR 0xFFC00408 /* Interrupt Identification Register */
-#define UART_LCR 0xFFC0040C /* Line Control Register */
-#define UART_MCR 0xFFC00410 /* Modem Control Register */
-#define UART_LSR 0xFFC00414 /* Line Status Register */
-#define UART_MSR 0xFFC00418 /* Modem Status Register */
-#define UART_SCR 0xFFC0041C /* SCR Scratch Register */
-#define UART_GCTL 0xFFC00424 /* Global Control Register */
+
+/*
+ * Because include/linux/serial_reg.h have defined UART_*,
+ * So we define blackfin uart regs to BFIN_UART0_*.
+ */
+#define BFIN_UART_THR 0xFFC00400 /* Transmit Holding register */
+#define BFIN_UART_RBR 0xFFC00400 /* Receive Buffer register */
+#define BFIN_UART_DLL 0xFFC00400 /* Divisor Latch (Low-Byte) */
+#define BFIN_UART_IER 0xFFC00404 /* Interrupt Enable Register */
+#define BFIN_UART_DLH 0xFFC00404 /* Divisor Latch (High-Byte) */
+#define BFIN_UART_IIR 0xFFC00408 /* Interrupt Identification Register */
+#define BFIN_UART_LCR 0xFFC0040C /* Line Control Register */
+#define BFIN_UART_MCR 0xFFC00410 /* Modem Control Register */
+#define BFIN_UART_LSR 0xFFC00414 /* Line Status Register */
+#define BFIN_UART_MSR 0xFFC00418 /* Modem Status Register */
+#define BFIN_UART_SCR 0xFFC0041C /* SCR Scratch Register */
+#define BFIN_UART_GCTL 0xFFC00424 /* Global Control Register */
/* SPI Controller (0xFFC00500 - 0xFFC005FF) */
#define SPI0_REGBASE 0xFFC00500
/* PLL_DIV Masks */
#define SCLK_DIV(x) (x) /* SCLK = VCO / x */
+#define CSEL 0x30 /* Core Select */
+#define SSEL 0xf /* System Select */
#define CCLK_DIV1 0x00000000 /* CCLK = VCO / 1 */
#define CCLK_DIV2 0x00000010 /* CCLK = VCO / 2 */
#define CCLK_DIV4 0x00000020 /* CCLK = VCO / 4 */
#define PLL_LOCKED 0x0020 /* PLL_LOCKCNT Has Been Reached */
/* SWRST Mask */
-#define SYSTEM_RESET 0x00000007 /* Initiates a system software reset */
-#define SWRST_DBL_FAULT_B 0x00000800 /* SWRST Core B Double Fault */
-#define SWRST_DBL_FAULT_A 0x00001000 /* SWRST Core A Double Fault */
-#define SWRST_WDT_B 0x00002000 /* SWRST Watchdog B */
-#define SWRST_WDT_A 0x00004000 /* SWRST Watchdog A */
-#define SWRST_OCCURRED 0x00008000 /* SWRST Status */
+#define SYSTEM_RESET 0x0007 /* Initiates a system software reset */
+#define DOUBLE_FAULT_A 0x0008 /* Core A Double Fault Causes Reset */
+#define DOUBLE_FAULT_B 0x0010 /* Core B Double Fault Causes Reset */
+#define SWRST_DBL_FAULT_A 0x0800 /* SWRST Core A Double Fault */
+#define SWRST_DBL_FAULT_B 0x1000 /* SWRST Core B Double Fault */
+#define SWRST_WDT_B 0x2000 /* SWRST Watchdog B */
+#define SWRST_WDT_A 0x4000 /* SWRST Watchdog A */
+#define SWRST_OCCURRED 0x8000 /* SWRST Status */
/* ************* SYSTEM INTERRUPT CONTROLLER MASKS ***************** */