#define SUPPORTED_REVID 0x3
#define OFFSET_(x) ((x) & 0x0000FFFF)
-#define L1_ISRAM 0xFFA00000
-#define L1_ISRAM_END 0xFFA04000
-#define DATA_BANKA_SRAM 0xFF800000
-#define DATA_BANKA_SRAM_END 0xFF804000
-#define DATA_BANKB_SRAM 0xFF900000
-#define DATA_BANKB_SRAM_END 0xFF904000
-#define L1_DSRAMA 0xFF800000
-#define L1_DSRAMA_END 0xFF804000
-#define L1_DSRAMB 0xFF900000
-#define L1_DSRAMB_END 0xFF904000
-#define L2_SRAM 0xFEB00000
-#define L2_SRAM_END 0xFEB20000
-#define AMB_FLASH 0x20000000
-#define AMB_FLASH_END 0x21000000
-#define AMB_FLASH_LENGTH 0x01000000
-#define L1_ISRAM_LENGTH 0x4000
-#define L1_DSRAMA_LENGTH 0x4000
-#define L1_DSRAMB_LENGTH 0x4000
-#define L2_SRAM_LENGTH 0x20000
/*some misc defines*/
#define IMASK_IVG15 0x8000
*/
-#define BLKFIN_ISUBBANKS 4
-#define BLKFIN_IWAYS 4
-#define BLKFIN_ILINES 32
+#define BFIN_ISUBBANKS 4
+#define BFIN_IWAYS 4
+#define BFIN_ILINES 32
-#define BLKFIN_DSUBBANKS 4
-#define BLKFIN_DWAYS 2
-#define BLKFIN_DLINES 64
+#define BFIN_DSUBBANKS 4
+#define BFIN_DWAYS 2
+#define BFIN_DLINES 64
#define WAY0_L 0x1
#define WAY1_L 0x2
#define AMGCTLVAL (V_AMBEN | V_AMCKEN | V_CDPRIO | V_B0PEN | V_B1PEN | V_B2PEN | V_B3PEN | 0x0002)
-#define MAX_VC 600000000
-#define MIN_VC 50000000
-
-/******************************* PLL Settings ********************************/
-#ifdef CONFIG_BFIN_KERNEL_CLOCK
-#if (CONFIG_VCO_MULT < 0)
-#error "VCO Multiplier is less than 0. Please select a different value"
-#endif
-
-#if (CONFIG_VCO_MULT == 0)
-#error "VCO Multiplier should be greater than 0. Please select a different value"
-#endif
-
-#ifndef CONFIG_CLKIN_HALF
-#define CONFIG_VCO_HZ (CONFIG_CLKIN_HZ * CONFIG_VCO_MULT)
-#else
-#define CONFIG_VCO_HZ ((CONFIG_CLKIN_HZ * CONFIG_VCO_MULT)/2)
-#endif
-
-#ifndef CONFIG_PLL_BYPASS
-#define CONFIG_CCLK_HZ (CONFIG_VCO_HZ/CONFIG_CCLK_DIV)
-#define CONFIG_SCLK_HZ (CONFIG_VCO_HZ/CONFIG_SCLK_DIV)
-#else
-#define CONFIG_CCLK_HZ CONFIG_CLKIN_HZ
-#define CONFIG_SCLK_HZ CONFIG_CLKIN_HZ
-#endif
-
-#if (CONFIG_SCLK_DIV < 1)
-#error "SCLK DIV cannot be less than 1 or more than 15. Please select a proper value"
-#endif
-
-#if (CONFIG_SCLK_DIV > 15)
-#error "SCLK DIV cannot be less than 1 or more than 15. Please select a proper value"
-#endif
-
-#if (CONFIG_CCLK_DIV != 1)
-#if (CONFIG_CCLK_DIV != 2)
-#if (CONFIG_CCLK_DIV != 4)
-#if (CONFIG_CCLK_DIV != 8)
-#error "CCLK DIV can be 1,2,4 or 8 only. Please select a proper value"
-#endif
-#endif
-#endif
-#endif
-
-#if (CONFIG_VCO_HZ > MAX_VC)
-#error "VCO selected is more than maximum value. Please change the VCO multipler"
-#endif
-
-#if (CONFIG_SCLK_HZ > 133000000)
-#error "Sclk value selected is more than maximum. Please select a proper value for SCLK multiplier"
-#endif
-
-#if (CONFIG_SCLK_HZ < 27000000)
-#error "Sclk value selected is less than minimum. Please select a proper value for SCLK multiplier"
-#endif
-
-#if (CONFIG_SCLK_HZ >= CONFIG_CCLK_HZ)
-#if (CONFIG_SCLK_HZ != CONFIG_CLKIN_HZ)
-#if (CONFIG_CCLK_HZ != CONFIG_CLKIN_HZ)
-#error "Please select sclk less than cclk"
-#endif
-#endif
-#endif
-
-#if (CONFIG_CCLK_DIV == 1)
-#define CONFIG_CCLK_ACT_DIV CCLK_DIV1
-#endif
-#if (CONFIG_CCLK_DIV == 2)
-#define CONFIG_CCLK_ACT_DIV CCLK_DIV2
-#endif
-#if (CONFIG_CCLK_DIV == 4)
-#define CONFIG_CCLK_ACT_DIV CCLK_DIV4
-#endif
-#if (CONFIG_CCLK_DIV == 8)
-#define CONFIG_CCLK_ACT_DIV CCLK_DIV8
-#endif
-#ifndef CONFIG_CCLK_ACT_DIV
-#define CONFIG_CCLK_ACT_DIV CONFIG_CCLK_DIV_not_defined_properly
-#endif
-
-#if ANOMALY_05000273 && (CONFIG_CCLK_DIV == 1)
-#error ANOMALY 05000273, please make sure CCLK is at least 2x SCLK
-#endif
-
-#endif /* CONFIG_BFIN_KERNEL_CLOCK */
-
#ifdef CONFIG_BF561
#define CPU "BF561"
#define CPUID 0x027bb000
#define CPUID 0x0
#endif
-#if (CONFIG_MEM_SIZE % 4)
-#error "SDRAM memory size must be a multiple of 4MB!"
-#endif
-#define SDRAM_IGENERIC (CPLB_L1_CHBL | CPLB_USER_RD | CPLB_VALID | CPLB_PORTPRIO)
-#define SDRAM_IKERNEL (SDRAM_IGENERIC | CPLB_LOCK)
-#define L1_IMEMORY ( CPLB_USER_RD | CPLB_VALID | CPLB_LOCK)
-#define SDRAM_INON_CHBL ( CPLB_USER_RD | CPLB_VALID)
-
-/*Use the menuconfig cache policy here - CONFIG_BLKFIN_WT/CONFIG_BLKFIN_WB*/
-
-#define ANOMALY_05000158_WORKAROUND 0x200
-#ifdef CONFIG_BLKFIN_WB /*Write Back Policy */
-#define SDRAM_DGENERIC (CPLB_L1_CHBL | CPLB_DIRTY \
- | CPLB_SUPV_WR | CPLB_USER_WR | CPLB_USER_RD | CPLB_VALID | ANOMALY_05000158_WORKAROUND)
-#else /*Write Through */
-#define SDRAM_DGENERIC (CPLB_L1_CHBL | CPLB_WT | CPLB_L1_AOW | CPLB_DIRTY \
- | CPLB_SUPV_WR | CPLB_USER_WR | CPLB_USER_RD | CPLB_VALID | ANOMALY_05000158_WORKAROUND)
-#endif
-
-
-#define L1_DMEMORY (CPLB_SUPV_WR | CPLB_USER_WR | CPLB_USER_RD | CPLB_VALID | ANOMALY_05000158_WORKAROUND | CPLB_LOCK | CPLB_DIRTY)
-#define SDRAM_DNON_CHBL (CPLB_SUPV_WR | CPLB_USER_WR | CPLB_USER_RD | CPLB_VALID | ANOMALY_05000158_WORKAROUND | CPLB_DIRTY)
-#define SDRAM_EBIU (CPLB_SUPV_WR | CPLB_USER_WR | CPLB_USER_RD | CPLB_VALID | ANOMALY_05000158_WORKAROUND | CPLB_DIRTY)
-#define SDRAM_OOPS (CPLB_VALID | ANOMALY_05000158_WORKAROUND | CPLB_LOCK | CPLB_DIRTY)
-
-#define L2_MEMORY (CPLB_SUPV_WR | CPLB_USER_WR | CPLB_USER_RD | CPLB_VALID | ANOMALY_05000158_WORKAROUND | CPLB_DIRTY)
-
-#define SIZE_1K 0x00000400 /* 1K */
-#define SIZE_4K 0x00001000 /* 4K */
-#define SIZE_1M 0x00100000 /* 1M */
-#define SIZE_4M 0x00400000 /* 4M */
-
-#define MAX_CPLBS (16 * 2)
-
-/*
-* Number of required data CPLB switchtable entries
-* MEMSIZE / 4 (we mostly install 4M page size CPLBs
-* approx 16 for smaller 1MB page size CPLBs for allignment purposes
-* 1 for L1 Data Memory
-* 1 for L2 Data Memory
-* 1 for CONFIG_DEBUG_HUNT_FOR_ZERO
-* 64 for ASYNC Memory
-*/
-
-
-#define MAX_SWITCH_D_CPLBS (((CONFIG_MEM_SIZE / 4) + 16 + 1 + 1 + 1 + 64) * 2)
-
-/*
-* Number of required instruction CPLB switchtable entries
-* MEMSIZE / 4 (we mostly install 4M page size CPLBs
-* approx 12 for smaller 1MB page size CPLBs for allignment purposes
-* 1 for L1 Instruction Memory
-* 1 for L2 Instruction Memory
-* 1 for CONFIG_DEBUG_HUNT_FOR_ZERO
-*/
-
-#define MAX_SWITCH_I_CPLBS (((CONFIG_MEM_SIZE / 4) + 12 + 1 + 1 + 1) * 2)
-
-#if 0 /* comment by mhfan */
-/* Event Vector Table Address */
-#define EVT_EMULATION_ADDR 0xffe02000
-#define EVT_RESET_ADDR 0xffe02004
-#define EVT_NMI_ADDR 0xffe02008
-#define EVT_EXCEPTION_ADDR 0xffe0200c
-#define EVT_GLOBAL_INT_ENB_ADDR 0xffe02010
-#define EVT_HARDWARE_ERROR_ADDR 0xffe02014
-#define EVT_TIMER_ADDR 0xffe02018
-#define EVT_IVG7_ADDR 0xffe0201c
-#define EVT_IVG8_ADDR 0xffe02020
-#define EVT_IVG9_ADDR 0xffe02024
-#define EVT_IVG10_ADDR 0xffe02028
-#define EVT_IVG11_ADDR 0xffe0202c
-#define EVT_IVG12_ADDR 0xffe02030
-#define EVT_IVG13_ADDR 0xffe02034
-#define EVT_IVG14_ADDR 0xffe02038
-#define EVT_IVG15_ADDR 0xffe0203c
-#define EVT_OVERRIDE_ADDR 0xffe02100
-#endif /* comment by mhfan */
-
#endif /* __MACH_BF561_H__ */