#define RESTART 0x20 /* Work Unit Transitions */
#define DI_SEL 0x40 /* Data Interrupt Timing Select */
#define DI_EN 0x80 /* Data Interrupt Enable */
+
#define NDSIZE 0xf00 /* Flex Descriptor Size */
+#define NDSIZE_0 0x0000 /* Next Descriptor Size = 0 (Stop/Autobuffer) */
+#define NDSIZE_1 0x0100 /* Next Descriptor Size = 1 */
+#define NDSIZE_2 0x0200 /* Next Descriptor Size = 2 */
+#define NDSIZE_3 0x0300 /* Next Descriptor Size = 3 */
+#define NDSIZE_4 0x0400 /* Next Descriptor Size = 4 */
+#define NDSIZE_5 0x0500 /* Next Descriptor Size = 5 */
+#define NDSIZE_6 0x0600 /* Next Descriptor Size = 6 */
+#define NDSIZE_7 0x0700 /* Next Descriptor Size = 7 */
+#define NDSIZE_8 0x0800 /* Next Descriptor Size = 8 */
+#define NDSIZE_9 0x0900 /* Next Descriptor Size = 9 */
+
#define DMAFLOW 0xf000 /* Next Operation */
+#define DMAFLOW_STOP 0x0000 /* Stop Mode */
+#define DMAFLOW_AUTO 0x1000 /* Autobuffer Mode */
+#define DMAFLOW_ARRAY 0x4000 /* Descriptor Array Mode */
+#define DMAFLOW_SMALL 0x6000 /* Small Model Descriptor List Mode */
+#define DMAFLOW_LARGE 0x7000 /* Large Model Descriptor List Mode */
/* Bit masks for DMAx_IRQ_STATUS, MDMA_Sx_IRQ_STATUS, MDMA_Dx_IRQ_STATUS */
#define TRP 0x3c0000 /* Pre charge-to-active command period */
#define TRAS 0x3c00000 /* Min Active-to-pre charge time */
#define TRC 0x3c000000 /* Active-to-active time */
+#define DDR_TRAS(x) ((x<<22)&TRAS) /* DDR tRAS = (1~15) cycles */
+#define DDR_TRP(x) ((x<<18)&TRP) /* DDR tRP = (1~15) cycles */
+#define DDR_TRC(x) ((x<<26)&TRC) /* DDR tRC = (1~15) cycles */
+#define DDR_TRFC(x) ((x<<14)&TRFC) /* DDR tRFC = (1~15) cycles */
+#define DDR_TREFI(x) (x&TREFI) /* DDR tRFC = (1~15) cycles */
/* Bit masks for EBIU_DDRCTL1 */
#define TRCD 0xf /* Active-to-Read/write delay */
-#define MRD 0xf0 /* Mode register set to active */
+#define TMRD 0xf0 /* Mode register set to active */
#define TWR 0x300 /* Write Recovery time */
#define DDRDATWIDTH 0x3000 /* DDR data width */
#define EXTBANKS 0xc000 /* External banks */
#define DDRDEVWIDTH 0x30000 /* DDR device width */
#define DDRDEVSIZE 0xc0000 /* DDR device size */
-#define TWWTR 0xf0000000 /* Write-to-read delay */
+#define TWTR 0xf0000000 /* Write-to-read delay */
+#define DDR_TWTR(x) ((x<<28)&TWTR) /* DDR tWTR = (1~15) cycles */
+#define DDR_TMRD(x) ((x<<4)&TMRD) /* DDR tMRD = (1~15) cycles */
+#define DDR_TWR(x) ((x<<8)&TWR) /* DDR tWR = (1~15) cycles */
+#define DDR_TRCD(x) (x&TRCD) /* DDR tRCD = (1~15) cycles */
+#define DDR_DATWIDTH 0x2000 /* DDR data width */
+#define EXTBANK_1 0 /* 1 external bank */
+#define EXTBANK_2 0x4000 /* 2 external banks */
+#define DEVSZ_64 0x40000 /* DDR External Bank Size = 64MB */
+#define DEVSZ_128 0x80000 /* DDR External Bank Size = 128MB */
+#define DEVSZ_256 0xc0000 /* DDR External Bank Size = 256MB */
+#define DEVSZ_512 0 /* DDR External Bank Size = 512MB */
+#define DEVWD_4 0 /* DDR Device Width = 4 Bits */
+#define DEVWD_8 0x10000 /* DDR Device Width = 8 Bits */
+#define DEVWD_16 0x20000 /* DDR Device Width = 16 Bits */
/* Bit masks for EBIU_DDRCTL2 */
#define CASLATENCY 0x70 /* CAS latency */
#define DLLRESET 0x100 /* DLL Reset */
#define REGE 0x1000 /* Register mode enable */
+#define CL_1_5 0x50 /* DDR CAS Latency = 1.5 cycles */
+#define CL_2 0x20 /* DDR CAS Latency = 2 cycles */
+#define CL_2_5 0x60 /* DDR CAS Latency = 2.5 cycles */
+#define CL_3 0x30 /* DDR CAS Latency = 3 cycles */
/* Bit masks for EBIU_DDRCTL3 */
#define CSEL 0x30 /* Core Select */
#define SSEL 0xf /* System Select */
+#define CSEL_DIV1 0x0000 /* CCLK = VCO / 1 */
+#define CSEL_DIV2 0x0010 /* CCLK = VCO / 2 */
+#define CSEL_DIV4 0x0020 /* CCLK = VCO / 4 */
+#define CSEL_DIV8 0x0030 /* CCLK = VCO / 8 */
/* Bit masks for PLL_CTL */
#define PLL_OFF 0x2 /* Disable PLL */
#define DF 0x1 /* Divide Frequency */
+/* SWRST Masks */
+#define SYSTEM_RESET 0x0007 /* Initiates A System Software Reset */
+#define DOUBLE_FAULT 0x0008 /* Core Double Fault Causes Reset */
+#define RESET_DOUBLE 0x2000 /* SW Reset Generated By Core Double-Fault */
+#define RESET_WDOG 0x4000 /* SW Reset Generated By Watchdog Timer */
+#define RESET_SOFTWARE 0x8000 /* SW Reset Occurred Since Last Read Of SWRST */
+
/* Bit masks for PLL_STAT */
#define PLL_LOCKED 0x20 /* PLL Locked Status */
#define KPADWE 0x1000 /* Keypad Wake-Up Enable */
#define ROTWE 0x2000 /* Rotary Wake-Up Enable */
+#define FREQ_333 0x0001 /* Switching Frequency Is 333 kHz */
+#define FREQ_667 0x0002 /* Switching Frequency Is 667 kHz */
+#define FREQ_1000 0x0003 /* Switching Frequency Is 1 MHz */
+
+#define GAIN_5 0x0000 /* GAIN = 5*/
+#define GAIN_10 0x0004 /* GAIN = 1*/
+#define GAIN_20 0x0008 /* GAIN = 2*/
+#define GAIN_50 0x000C /* GAIN = 5*/
+
+#define VLEV_085 0x0060 /* VLEV = 0.85 V (-5% - +10% Accuracy) */
+#define VLEV_090 0x0070 /* VLEV = 0.90 V (-5% - +10% Accuracy) */
+#define VLEV_095 0x0080 /* VLEV = 0.95 V (-5% - +10% Accuracy) */
+#define VLEV_100 0x0090 /* VLEV = 1.00 V (-5% - +10% Accuracy) */
+#define VLEV_105 0x00A0 /* VLEV = 1.05 V (-5% - +10% Accuracy) */
+#define VLEV_110 0x00B0 /* VLEV = 1.10 V (-5% - +10% Accuracy) */
+#define VLEV_115 0x00C0 /* VLEV = 1.15 V (-5% - +10% Accuracy) */
+#define VLEV_120 0x00D0 /* VLEV = 1.20 V (-5% - +10% Accuracy) */
+#define VLEV_125 0x00E0 /* VLEV = 1.25 V (-5% - +10% Accuracy) */
+#define VLEV_130 0x00F0 /* VLEV = 1.30 V (-5% - +10% Accuracy) */
+
/* Bit masks for NFC_CTL */
#define WR_DLY 0xf /* Write Strobe Delay */
#define MFD 0xf000 /* Multi channel Frame Delay */
#define FSDR 0x80 /* Frame Sync to Data Relationship */
-#define MCMEM 0x10 /* Multi channel Frame Mode Enable */
+#define MCMEN 0x10 /* Multi channel Frame Mode Enable */
#define MCDRXPE 0x8 /* Multi channel DMA Receive Packing */
#define MCDTXPE 0x4 /* Multi channel DMA Transmit Packing */
#define MCCRM 0x3 /* 2X Clock Recovery Mode */