md: cancel check/repair requests when recovery is needed

[linux-2.6] / include / asm-arm / arch-omap / mux.h

diff --git a/include/asm-arm/arch-omap/mux.h b/include/asm-arm/arch-omap/mux.h
index 828cc5c114e18e66e4e0c7a797b4df3d928dc281..ff9a5b5575fd4952ecbeef65362d7172195582c0 100644 (file)
--- a/include/asm-arm/arch-omap/mux.h
+++ b/include/asm-arm/arch-omap/mux.h
@@ -4,9 +4,10 @@
  * Table of the Omap register configurations for the FUNC_MUX and
  * PULL_DWN combinations.
  *
- * Copyright (C) 2003 - 2005 Nokia Corporation
+ * Copyright (C) 2004 - 2008 Texas Instruments Inc.
+ * Copyright (C) 2003 - 2008 Nokia Corporation
  *
- * Written by Tony Lindgren <tony.lindgren@nokia.com>
+ * Written by Tony Lindgren
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -27,14 +28,6 @@
  *      - W8        = ball
  *      - 1610      = 1510 or 1610, none if common for both 1510 and 1610
  *      - MMC2_DAT0 = function
- *
- * Change log:
- *   Added entry for the I2C interface. (02Feb 2004)
- *   Copyright (C) 2004 Texas Instruments
- *
- *   Added entry for the keypad and uwire CS1. (09Mar 2004)
- *   Copyright (C) 2004 Texas Instruments
- *
  */
 
 #ifndef __ASM_ARCH_MUX_H
@@ -406,6 +399,29 @@ enum omap1xxx_index {
        V10_1610_CF_IREQ,
        W10_1610_CF_RESET,
        W11_1610_CF_CD1,
+
+       /* parallel camera */
+       J15_1610_CAM_LCLK,
+       J18_1610_CAM_D7,
+       J19_1610_CAM_D6,
+       J14_1610_CAM_D5,
+       K18_1610_CAM_D4,
+       K19_1610_CAM_D3,
+       K15_1610_CAM_D2,
+       K14_1610_CAM_D1,
+       L19_1610_CAM_D0,
+       L18_1610_CAM_VS,
+       L15_1610_CAM_HS,
+       M19_1610_CAM_RSTZ,
+       Y15_1610_CAM_OUTCLK,
+
+       /* serial camera */
+       H19_1610_CAM_EXCLK,
+       Y12_1610_CCP_CLKP,
+       W13_1610_CCP_CLKM,
+       W14_1610_CCP_DATAP,
+       Y14_1610_CCP_DATAM,
+
 };
 
 enum omap24xx_index {
@@ -421,7 +437,9 @@ enum omap24xx_index {
        /* 24xx clock */
        W14_24XX_SYS_CLKOUT,
 
-       /* 24xx GPMC wait pin monitoring */
+       /* 24xx GPMC chipselects, wait pin monitoring */
+       E2_GPMC_NCS2,
+       L2_GPMC_NCS7,
        L3_GPMC_WAIT0,
        N7_GPMC_WAIT1,
        M1_GPMC_WAIT2,
@@ -435,6 +453,7 @@ enum omap24xx_index {
 
        /* 24xx GPIO */
        M21_242X_GPIO11,
+       P21_242X_GPIO12,
        AA10_242X_GPIO13,
        AA6_242X_GPIO14,
        AA4_242X_GPIO15,
@@ -443,8 +462,15 @@ enum omap24xx_index {
        AA8_242X_GPIO58,
        Y20_24XX_GPIO60,
        W4__24XX_GPIO74,
+       N15_24XX_GPIO85,
        M15_24XX_GPIO92,
+       P20_24XX_GPIO93,
+       P18_24XX_GPIO95,
+       M18_24XX_GPIO96,
+       L14_24XX_GPIO97,
+       J15_24XX_GPIO99,
        V14_24XX_GPIO117,
+       P14_24XX_GPIO125,
 
        /* 242x DBG GPIO */
        V4_242X_GPIO49,
@@ -466,8 +492,6 @@ enum omap24xx_index {
        D3_242X_DMAREQ4,
        E3_242X_DMAREQ5,
 
-       P20_24XX_TSC_IRQ,
-
        /* UART3 */
        K15_24XX_UART3_TX,
        K14_24XX_UART3_RX,
@@ -486,6 +510,30 @@ enum omap24xx_index {
        G18_24XX_MMC_CMD_DIR,
        H15_24XX_MMC_CLKI,
 
+       /* Full speed USB */
+       J20_24XX_USB0_PUEN,
+       J19_24XX_USB0_VP,
+       K20_24XX_USB0_VM,
+       J18_24XX_USB0_RCV,
+       K19_24XX_USB0_TXEN,
+       J14_24XX_USB0_SE0,
+       K18_24XX_USB0_DAT,
+
+       N14_24XX_USB1_SE0,
+       W12_24XX_USB1_SE0,
+       P15_24XX_USB1_DAT,
+       R13_24XX_USB1_DAT,
+       W20_24XX_USB1_TXEN,
+       P13_24XX_USB1_TXEN,
+       V19_24XX_USB1_RCV,
+       V12_24XX_USB1_RCV,
+
+       AA10_24XX_USB2_SE0,
+       Y11_24XX_USB2_DAT,
+       AA12_24XX_USB2_TXEN,
+       AA6_24XX_USB2_RCV,
+       AA4_24XX_USB2_TLLSE0,
+
        /* Keypad GPIO*/
        T19_24XX_KBR0,
        R19_24XX_KBR1,
@@ -505,13 +553,57 @@ enum omap24xx_index {
        B3__24XX_KBR5,
        AA4_24XX_KBC2,
        B13_24XX_KBC6,
+
+       /* 2430 USB */
+       AD9_2430_USB0_PUEN,
+       Y11_2430_USB0_VP,
+       AD7_2430_USB0_VM,
+       AE7_2430_USB0_RCV,
+       AD4_2430_USB0_TXEN,
+       AF9_2430_USB0_SE0,
+       AE6_2430_USB0_DAT,
+       AD24_2430_USB1_SE0,
+       AB24_2430_USB1_RCV,
+       Y25_2430_USB1_TXEN,
+       AA26_2430_USB1_DAT,
+
+       /* 2430 HS-USB */
+       AD9_2430_USB0HS_DATA3,
+       Y11_2430_USB0HS_DATA4,
+       AD7_2430_USB0HS_DATA5,
+       AE7_2430_USB0HS_DATA6,
+       AD4_2430_USB0HS_DATA2,
+       AF9_2430_USB0HS_DATA0,
+       AE6_2430_USB0HS_DATA1,
+       AE8_2430_USB0HS_CLK,
+       AD8_2430_USB0HS_DIR,
+       AE5_2430_USB0HS_STP,
+       AE9_2430_USB0HS_NXT,
+       AC7_2430_USB0HS_DATA7,
+
+       /* 2430 McBSP */
+       AC10_2430_MCBSP2_FSX,
+       AD16_2430_MCBSP2_CLX,
+       AE13_2430_MCBSP2_DX,
+       AD13_2430_MCBSP2_DR,
+       AC10_2430_MCBSP2_FSX_OFF,
+       AD16_2430_MCBSP2_CLX_OFF,
+       AE13_2430_MCBSP2_DX_OFF,
+       AD13_2430_MCBSP2_DR_OFF,
+
+};
+
+struct omap_mux_cfg {
+       struct pin_config       *pins;
+       unsigned long           size;
+       int                     (*cfg_reg)(const struct pin_config *cfg);
 };
 
 #ifdef CONFIG_OMAP_MUX
 /* setup pin muxing in Linux */
 extern int omap1_mux_init(void);
 extern int omap2_mux_init(void);
-extern int omap_mux_register(struct pin_config * pins, unsigned long size);
+extern int omap_mux_register(struct omap_mux_cfg *);
 extern int omap_cfg_reg(unsigned long reg_cfg);
 #else
 /* boot loader does it all (no warnings from CONFIG_OMAP_MUX_WARNINGS) */