#ifndef __ASM_ARM_ARCH_IO_H
#define __ASM_ARM_ARCH_IO_H
+#include <asm/hardware.h>
+
#define IO_SPACE_LIMIT 0xffffffff
#define __mem_pci(a) (a)
-#define ___io(p) ((void __iomem *)((p)+IXP2000_PCI_IO_VIRT_BASE))
/*
- * The IXP2400 before revision B0 asserts byte lanes for PCI I/O
+ * The A? revisions of the IXP2000s assert byte lanes for PCI I/O
* transactions the other way round (MEM transactions don't have this
- * issue), so we need to override the standard functions. B0 and later
- * have a bit that can be set to 1 to get the 'proper' behavior, but
- * since that isn't available on the A? revisions we just keep doing
- * things manually.
+ * issue), so if we want to support those models, we need to override
+ * the standard I/O functions.
+ *
+ * B0 and later have a bit that can be set to 1 to get the proper
+ * behavior for I/O transactions, which then allows us to use the
+ * standard I/O functions. This is what we do if the user does not
+ * explicitly ask for support for pre-B0.
*/
+#ifdef CONFIG_IXP2000_SUPPORT_BROKEN_PCI_IO
+#define ___io(p) ((void __iomem *)((p)+IXP2000_PCI_IO_VIRT_BASE))
+
#define alignb(addr) (void __iomem *)((unsigned long)(addr) ^ 3)
#define alignw(addr) (void __iomem *)((unsigned long)(addr) ^ 2)
#define ioport_map(port, nr) ___io(port)
#define ioport_unmap(addr)
+#else
+#define __io(p) ((void __iomem *)((p)+IXP2000_PCI_IO_VIRT_BASE))
+#endif
-#ifdef CONFIG_ARCH_IXDP2X01
-/*
- * This is an ugly hack but the CS8900 on the 2x01's does not sit in any sort
- * of "I/O space" and is just direct mapped into a 32-bit-only addressable
- * bus. The address space for this bus is such that we can't really easily
- * make it contiguous to the PCI I/O address range, and it also does not
- * need swapping like PCI addresses do (IXDP2x01 is a BE platform).
- * B/C of this we can't use the standard in/out functions and need to
- * runtime check if the incoming address is a PCI address or for
- * the CS89x0.
- */
-#undef inw
-#undef outw
-#undef insw
-#undef outsw
-
-#include <asm/mach-types.h>
-
-static inline void insw(u32 ptr, void *buf, int length)
-{
- register volatile u32 *port = (volatile u32 *)ptr;
-
- /*
- * Is this cycle meant for the CS8900?
- */
- if ((machine_is_ixdp2401() || machine_is_ixdp2801()) &&
- (((u32)port >= (u32)IXDP2X01_CS8900_VIRT_BASE) &&
- ((u32)port <= (u32)IXDP2X01_CS8900_VIRT_END))) {
- u8 *buf8 = (u8*)buf;
- register u32 tmp32;
-
- do {
- tmp32 = *port;
- *buf8++ = (u8)tmp32;
- *buf8++ = (u8)(tmp32 >> 8);
- } while(--length);
-
- return;
- }
-
- __raw_readsw(alignw(___io(ptr)),buf,length);
-}
-
-static inline void outsw(u32 ptr, void *buf, int length)
-{
- register volatile u32 *port = (volatile u32 *)ptr;
-
- /*
- * Is this cycle meant for the CS8900?
- */
- if ((machine_is_ixdp2401() || machine_is_ixdp2801()) &&
- (((u32)port >= (u32)IXDP2X01_CS8900_VIRT_BASE) &&
- ((u32)port <= (u32)IXDP2X01_CS8900_VIRT_END))) {
- register u32 tmp32;
- u8 *buf8 = (u8*)buf;
- do {
- tmp32 = *buf8++;
- tmp32 |= (*buf8++) << 8;
- *port = tmp32;
- } while(--length);
- return;
- }
-
- __raw_writesw(alignw(___io(ptr)),buf,length);
-}
-
-
-static inline u16 inw(u32 ptr)
-{
- register volatile u32 *port = (volatile u32 *)ptr;
-
- /*
- * Is this cycle meant for the CS8900?
- */
- if ((machine_is_ixdp2401() || machine_is_ixdp2801()) &&
- (((u32)port >= (u32)IXDP2X01_CS8900_VIRT_BASE) &&
- ((u32)port <= (u32)IXDP2X01_CS8900_VIRT_END))) {
- return (u16)(*port);
- }
-
- return __raw_readw(alignw(___io(ptr)));
-}
-
-static inline void outw(u16 value, u32 ptr)
-{
- register volatile u32 *port = (volatile u32 *)ptr;
-
- if ((machine_is_ixdp2401() || machine_is_ixdp2801()) &&
- (((u32)port >= (u32)IXDP2X01_CS8900_VIRT_BASE) &&
- ((u32)port <= (u32)IXDP2X01_CS8900_VIRT_END))) {
- *port = value;
- return;
- }
-
- __raw_writew((value),alignw(___io(ptr)));
-}
-#endif /* IXDP2x01 */
-
#endif