* map_mft_record - map, pin and lock an mft record
* @ni: ntfs inode whose MFT record to map
*
- * First, take the mrec_lock semaphore. We might now be sleeping, while waiting
- * for the semaphore if it was already locked by someone else.
+ * First, take the mrec_lock mutex. We might now be sleeping, while waiting
+ * for the mutex if it was already locked by someone else.
*
* The page of the record is mapped using map_mft_record_page() before being
* returned to the caller.
* So that code will end up having to own the mrec_lock of all mft
* records/inodes present in the page before I/O can proceed. In that case we
* wouldn't need to bother with PG_locked and PG_uptodate as nobody will be
- * accessing anything without owning the mrec_lock semaphore. But we do need
- * to use them because of the read_cache_page() invocation and the code becomes
- * so much simpler this way that it is well worth it.
+ * accessing anything without owning the mrec_lock mutex. But we do need to
+ * use them because of the read_cache_page() invocation and the code becomes so
+ * much simpler this way that it is well worth it.
*
* The mft record is now ours and we return a pointer to it. You need to check
* the returned pointer with IS_ERR() and if that is true, PTR_ERR() will return
atomic_inc(&ni->count);
/* Serialize access to this mft record. */
- down(&ni->mrec_lock);
+ mutex_lock(&ni->mrec_lock);
m = map_mft_record_page(ni);
if (likely(!IS_ERR(m)))
return m;
- up(&ni->mrec_lock);
+ mutex_unlock(&ni->mrec_lock);
atomic_dec(&ni->count);
ntfs_error(ni->vol->sb, "Failed with error code %lu.", -PTR_ERR(m));
return m;
ntfs_debug("Entering for mft_no 0x%lx.", ni->mft_no);
unmap_mft_record_page(ni);
- up(&ni->mrec_lock);
+ mutex_unlock(&ni->mrec_lock);
atomic_dec(&ni->count);
/*
* If pure ntfs_inode, i.e. no vfs inode attached, we leave it to
* in which case just return it. If not found, add it to the base
* inode before returning it.
*/
- down(&base_ni->extent_lock);
+ mutex_lock(&base_ni->extent_lock);
if (base_ni->nr_extents > 0) {
extent_nis = base_ni->ext.extent_ntfs_inos;
for (i = 0; i < base_ni->nr_extents; i++) {
}
}
if (likely(ni != NULL)) {
- up(&base_ni->extent_lock);
+ mutex_unlock(&base_ni->extent_lock);
atomic_dec(&base_ni->count);
/* We found the record; just have to map and return it. */
m = map_mft_record(ni);
/* Record wasn't there. Get a new ntfs inode and initialize it. */
ni = ntfs_new_extent_inode(base_ni->vol->sb, mft_no);
if (unlikely(!ni)) {
- up(&base_ni->extent_lock);
+ mutex_unlock(&base_ni->extent_lock);
atomic_dec(&base_ni->count);
return ERR_PTR(-ENOMEM);
}
/* Now map the record. */
m = map_mft_record(ni);
if (IS_ERR(m)) {
- up(&base_ni->extent_lock);
+ mutex_unlock(&base_ni->extent_lock);
atomic_dec(&base_ni->count);
ntfs_clear_extent_inode(ni);
goto map_err_out;
base_ni->ext.extent_ntfs_inos = tmp;
}
base_ni->ext.extent_ntfs_inos[base_ni->nr_extents++] = ni;
- up(&base_ni->extent_lock);
+ mutex_unlock(&base_ni->extent_lock);
atomic_dec(&base_ni->count);
ntfs_debug("Done 2.");
*ntfs_ino = ni;
return m;
unm_err_out:
unmap_mft_record(ni);
- up(&base_ni->extent_lock);
+ mutex_unlock(&base_ni->extent_lock);
atomic_dec(&base_ni->count);
/*
* If the extent inode was not attached to the base inode we need to
BUG_ON(NInoAttr(ni));
mark_ntfs_record_dirty(ni->page, ni->page_ofs);
/* Determine the base vfs inode and mark it dirty, too. */
- down(&ni->extent_lock);
+ mutex_lock(&ni->extent_lock);
if (likely(ni->nr_extents >= 0))
base_ni = ni;
else
base_ni = ni->ext.base_ntfs_ino;
- up(&ni->extent_lock);
+ mutex_unlock(&ni->extent_lock);
__mark_inode_dirty(VFS_I(base_ni), I_DIRTY_SYNC | I_DIRTY_DATASYNC);
}
* fs/ntfs/aops.c::mark_ntfs_record_dirty().
*
* On success, clean the mft record and return 0. On error, leave the mft
- * record dirty and return -errno. The caller should call make_bad_inode() on
- * the base inode to ensure no more access happens to this inode. We do not do
- * it here as the caller may want to finish writing other extent mft records
- * first to minimize on-disk metadata inconsistencies.
+ * record dirty and return -errno.
*
* NOTE: We always perform synchronous i/o and ignore the @sync parameter.
* However, if the mft record has a counterpart in the mft mirror and @sync is
}
ntfs_debug("Inode 0x%lx is not dirty.", mft_no);
/* The inode is not dirty, try to take the mft record lock. */
- if (unlikely(down_trylock(&ni->mrec_lock))) {
+ if (unlikely(!mutex_trylock(&ni->mrec_lock))) {
ntfs_debug("Mft record 0x%lx is already locked, do "
"not write it.", mft_no);
atomic_dec(&ni->count);
* corresponding to this extent mft record attached.
*/
ni = NTFS_I(vi);
- down(&ni->extent_lock);
+ mutex_lock(&ni->extent_lock);
if (ni->nr_extents <= 0) {
/*
* The base inode has no attached extent inodes, write this
* extent mft record.
*/
- up(&ni->extent_lock);
+ mutex_unlock(&ni->extent_lock);
iput(vi);
ntfs_debug("Base inode 0x%lx has no attached extent inodes, "
"write the extent record.", na.mft_no);
* extent mft record.
*/
if (!eni) {
- up(&ni->extent_lock);
+ mutex_unlock(&ni->extent_lock);
iput(vi);
ntfs_debug("Extent inode 0x%lx is not attached to its base "
"inode 0x%lx, write the extent record.",
mft_no, na.mft_no);
/* Take a reference to the extent ntfs inode. */
atomic_inc(&eni->count);
- up(&ni->extent_lock);
+ mutex_unlock(&ni->extent_lock);
/*
* Found the extent inode coresponding to this extent mft record.
* Try to take the mft record lock.
*/
- if (unlikely(down_trylock(&eni->mrec_lock))) {
+ if (unlikely(!mutex_trylock(&eni->mrec_lock))) {
atomic_dec(&eni->count);
iput(vi);
ntfs_debug("Extent mft record 0x%lx is already locked, do "
* have its page mapped and it is very easy to do.
*/
atomic_inc(&ni->count);
- down(&ni->mrec_lock);
+ mutex_lock(&ni->mrec_lock);
ni->page = page;
ni->page_ofs = ofs;
/*
BUG_ON(NInoAttr(ni));
BUG_ON(ni->nr_extents != -1);
- down(&ni->extent_lock);
+ mutex_lock(&ni->extent_lock);
base_ni = ni->ext.base_ntfs_ino;
- up(&ni->extent_lock);
+ mutex_unlock(&ni->extent_lock);
BUG_ON(base_ni->nr_extents <= 0);
ntfs_debug("Entering for extent inode 0x%lx, base inode 0x%lx.\n",
mft_no, base_ni->mft_no);
- down(&base_ni->extent_lock);
+ mutex_lock(&base_ni->extent_lock);
/* Make sure we are holding the only reference to the extent inode. */
if (atomic_read(&ni->count) > 2) {
ntfs_error(vol->sb, "Tried to free busy extent inode 0x%lx, "
"not freeing.", base_ni->mft_no);
- up(&base_ni->extent_lock);
+ mutex_unlock(&base_ni->extent_lock);
return -EBUSY;
}
break;
}
- up(&base_ni->extent_lock);
+ mutex_unlock(&base_ni->extent_lock);
if (unlikely(err)) {
ntfs_error(vol->sb, "Extent inode 0x%lx is not attached to "
return 0;
rollback:
/* Rollback what we did... */
- down(&base_ni->extent_lock);
+ mutex_lock(&base_ni->extent_lock);
extent_nis = base_ni->ext.extent_ntfs_inos;
if (!(base_ni->nr_extents & 3)) {
int new_size = (base_ni->nr_extents + 4) * sizeof(ntfs_inode*);
if (unlikely(!extent_nis)) {
ntfs_error(vol->sb, "Failed to allocate internal "
"buffer during rollback.%s", es);
- up(&base_ni->extent_lock);
+ mutex_unlock(&base_ni->extent_lock);
NVolSetErrors(vol);
goto rollback_error;
}
m->flags |= MFT_RECORD_IN_USE;
m->sequence_number = old_seq_no;
extent_nis[base_ni->nr_extents++] = ni;
- up(&base_ni->extent_lock);
+ mutex_unlock(&base_ni->extent_lock);
mark_mft_record_dirty(ni);
return err;
}