Merge git://git.infradead.org/battery-2.6

[linux-2.6] / drivers / watchdog / Kconfig

diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index 2792bc1a726991b7b3dbf0046ad1e2d2dd6b313b..48399e134c0de37d31cfcd05fc16213b7bc7dc0e 100644 (file)
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -223,7 +223,7 @@ config DAVINCI_WATCHDOG
 
 config AT32AP700X_WDT
        tristate "AT32AP700x watchdog"
-       depends on CPU_AT32AP7000
+       depends on CPU_AT32AP700X
        help
          Watchdog timer embedded into AT32AP700x devices. This will reboot
          your system when the timeout is reached.
@@ -295,6 +295,19 @@ config ALIM7101_WDT
 
          Most people will say N.
 
+config GEODE_WDT
+       tristate "AMD Geode CS5535/CS5536 Watchdog"
+       depends on MGEODE_LX
+       help
+         This driver enables a watchdog capability built into the
+         CS5535/CS5536 companion chips for the AMD Geode GX and LX
+         processors.  This watchdog watches your kernel to make sure
+         it doesn't freeze, and if it does, it reboots your computer after
+         a certain amount of time.
+
+         You can compile this driver directly into the kernel, or use
+         it as a module.  The module will be called geodewdt.
+
 config SC520_WDT
        tristate "AMD Elan SC520 processor Watchdog"
        depends on X86
@@ -392,6 +405,28 @@ config ITCO_VENDOR_SUPPORT
          devices. At this moment we only have additional support for some
          SuperMicro Inc. motherboards.
 
+config IT8712F_WDT
+       tristate "IT8712F (Smart Guardian) Watchdog Timer"
+       depends on X86
+       ---help---
+         This is the driver for the built-in watchdog timer on the IT8712F
+         Super I/0 chipset used on many motherboards.
+
+         To compile this driver as a module, choose M here: the
+         module will be called it8712f_wdt.
+
+config HP_WATCHDOG
+       tristate "HP Proliant iLO 2 Hardware Watchdog Timer"
+       depends on X86
+       help
+         A software monitoring watchdog and NMI sourcing driver. This driver
+         will detect lockups and provide stack trace. Also, when an NMI
+         occurs this driver will make the necessary BIOS calls to log
+         the cause of the NMI. This is a driver that will only load on a
+         HP ProLiant system with a minimum of iLO2 support.
+         To compile this driver as a module, choose M here: the
+         module will be called hpwdt.
+
 config SC1200_WDT
        tristate "National Semiconductor PC87307/PC97307 (ala SC1200) Watchdog"
        depends on X86
@@ -456,6 +491,19 @@ config SBC8360_WDT
 
          Most people will say N.
 
+config SBC7240_WDT
+       tristate "SBC Nano 7240 Watchdog Timer"
+       depends on X86_32
+       ---help---
+         This is the driver for the hardware watchdog found on the IEI
+         single board computers EPIC Nano 7240 (and likely others). This
+         watchdog simply watches your kernel to make sure it doesn't freeze,
+         and if it does, it reboots your computer after a certain amount of
+         time.
+
+         To compile this driver as a module, choose M here: the
+         module will be called sbc7240_wdt.
+
 config CPU5_WDT
        tristate "SMA CPU5 Watchdog"
        depends on X86
@@ -586,7 +634,7 @@ config SBC_EPX_C3_WATCHDOG
 
 config INDYDOG
        tristate "Indy/I2 Hardware Watchdog"
-       depends on SGI_IP22
+       depends on SGI_HAS_INDYDOG
        help
          Hardware driver for the Indy's/I2's watchdog. This is a
          watchdog timer that will reboot the machine after a 60 second
@@ -610,12 +658,31 @@ config WDT_RM9K_GPI
          To compile this driver as a module, choose M here: the
          module will be called rm9k_wdt.
 
+config SIBYTE_WDOG
+       tristate "Sibyte SoC hardware watchdog"
+       depends on CPU_SB1
+       help
+         Watchdog driver for the built in watchdog hardware in Sibyte
+         SoC processors.  There are apparently two watchdog timers
+         on such processors; this driver supports only the first one,
+         because currently Linux only supports exporting one watchdog
+         to userspace.
+
+         To compile this driver as a loadable module, choose M here.
+         The module will be called sb_wdog.
+
 config AR7_WDT
        tristate "TI AR7 Watchdog Timer"
        depends on AR7
        help
          Hardware driver for the TI AR7 Watchdog Timer.
 
+config TXX9_WDT
+       tristate "Toshiba TXx9 Watchdog Timer"
+       depends on CPU_TX39XX || CPU_TX49XX
+       help
+         Hardware driver for the built-in watchdog timer on TXx9 MIPS SoCs.
+
 # PARISC Architecture
 
 # POWERPC Architecture
@@ -721,8 +788,6 @@ config WATCHDOG_RIO
          machines.  The watchdog timeout period is normally one minute but
          can be changed with a boot-time parameter.
 
-# V850 Architecture
-
 # XTENSA Architecture
 
 #