(e.g. an accelerated X server) and that are not frame buffer
device-aware may cause unexpected results. If unsure, say N.
+config FB_DDC
+ tristate
+ depends on FB && I2C && I2C_ALGOBIT
+ default n
+
config FB_CFB_FILLRECT
tristate
depends on FB
default n
config FB_BACKLIGHT
- bool
- depends on FB
- default n
+ bool
+ depends on FB
+ select BACKLIGHT_LCD_SUPPORT
+ select BACKLIGHT_CLASS_DEVICE
+ default n
config FB_MODE_HELPERS
bool "Enable Video Mode Handling Helpers"
bool "LogicPD LCD 3.5\" QVGA w/HRTFT IC"
help
This is an implementation of the Sharp LQ035Q7DB02, a 3.5"
- color QVGA, HRTFT panel. The LogicPD device includes an
+ color QVGA, HRTFT panel. The LogicPD device includes
an integrated HRTFT controller IC.
The native resolution is 240x320.
is based on the KS-108 lcd controller and is typically a matrix
of 2*n chips. This driver was tested with a 128x64 panel. This
driver supports it for use with x86 SBCs through a 16 bit GPIO
- interface (8 bit data, 8 bit control). If you anticpate using
+ interface (8 bit data, 8 bit control). If you anticipate using
this driver, say Y or M; otherwise say N. You must specify the
GPIO IO address to be used for setting control and data.
config FB_IMAC
bool "Intel-based Macintosh Framebuffer Support"
- depends on (FB = y) && X86
+ depends on (FB = y) && X86 && EFI
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
config FB_NVIDIA_BACKLIGHT
bool "Support for backlight control"
- depends on FB_NVIDIA && PPC_PMAC
+ depends on FB_NVIDIA && PMAC_BACKLIGHT
select FB_BACKLIGHT
- select BACKLIGHT_LCD_SUPPORT
- select BACKLIGHT_CLASS_DEVICE
default y
help
Say Y here if you want to control the backlight of your display.
depends on FB && PCI
select I2C_ALGOBIT if FB_RIVA_I2C
select I2C if FB_RIVA_I2C
+ select FB_DDC if FB_RIVA_I2C
select FB_MODE_HELPERS
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
default n
help
Say Y here if you want the Riva driver to output all sorts
- of debugging informations to provide to the maintainer when
+ of debugging information to provide to the maintainer when
something goes wrong.
config FB_RIVA_BACKLIGHT
bool "Support for backlight control"
- depends on FB_RIVA && PPC_PMAC
+ depends on FB_RIVA && PMAC_BACKLIGHT
select FB_BACKLIGHT
- select BACKLIGHT_LCD_SUPPORT
- select BACKLIGHT_CLASS_DEVICE
default y
help
Say Y here if you want to control the backlight of your display.
depends on FB_I810 && FB_I810_GTF
select I2C
select I2C_ALGOBIT
+ select FB_DDC
help
config FB_INTEL
- tristate "Intel 830M/845G/852GM/855GM/865G support (EXPERIMENTAL)"
+ tristate "Intel 830M/845G/852GM/855GM/865G/915G/945G support (EXPERIMENTAL)"
depends on FB && EXPERIMENTAL && PCI && X86
select AGP
select AGP_INTEL
+ select I2C_ALGOBIT if FB_INTEL_I2C
+ select I2C if FB_INTEL_I2C
select FB_MODE_HELPERS
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
help
This driver supports the on-board graphics built in to the Intel
- 830M/845G/852GM/855GM/865G chipsets.
+ 830M/845G/852GM/855GM/865G/915G/915GM/945G/945GM chipsets.
Say Y if you have and plan to use such a board.
- To compile this driver as a module, choose M here: the
+ If you say Y here and want DDC/I2C support you must first say Y to
+ "I2C support" and "I2C bit-banging support" in the character devices
+ section.
+
+ If you say M here then "I2C support" and "I2C bit-banging support"
+ can be build either as modules or built-in.
+
+ To compile this driver as a module, choose M here: the
module will be called intelfb.
+ For more information, please read <file:Documentation/fb/intelfb.txt>
+
config FB_INTEL_DEBUG
- bool "Intel driver Debug Messages"
+ bool "Intel driver Debug Messages"
depends on FB_INTEL
---help---
Say Y here if you want the Intel driver to output all sorts
- of debugging informations to provide to the maintainer when
+ of debugging information to provide to the maintainer when
something goes wrong.
+config FB_INTEL_I2C
+ bool "DDC/I2C for Intel framebuffer support"
+ depends on FB_INTEL
+ default y
+ help
+ Say Y here if you want DDC/I2C support for your on-board Intel graphics.
+
config FB_MATROX
tristate "Matrox acceleration"
depends on FB && PCI
depends on FB && PCI
select I2C_ALGOBIT if FB_RADEON_I2C
select I2C if FB_RADEON_I2C
+ select FB_DDC if FB_RADEON_I2C
select FB_MODE_HELPERS
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
config FB_RADEON_BACKLIGHT
bool "Support for backlight control"
- depends on FB_RADEON && PPC_PMAC
+ depends on FB_RADEON && PMAC_BACKLIGHT
select FB_BACKLIGHT
- select BACKLIGHT_LCD_SUPPORT
- select BACKLIGHT_CLASS_DEVICE
default y
help
Say Y here if you want to control the backlight of your display.
default n
help
Say Y here if you want the Radeon driver to output all sorts
- of debugging informations to provide to the maintainer when
+ of debugging information to provide to the maintainer when
something goes wrong.
config FB_ATY128
config FB_ATY128_BACKLIGHT
bool "Support for backlight control"
- depends on FB_ATY128 && PPC_PMAC
+ depends on FB_ATY128 && PMAC_BACKLIGHT
select FB_BACKLIGHT
- select BACKLIGHT_LCD_SUPPORT
- select BACKLIGHT_CLASS_DEVICE
default y
help
Say Y here if you want to control the backlight of your display.
config FB_ATY_BACKLIGHT
bool "Support for backlight control"
- depends on FB_ATY && PPC_PMAC
+ depends on FB_ATY && PMAC_BACKLIGHT
select FB_BACKLIGHT
- select BACKLIGHT_LCD_SUPPORT
- select BACKLIGHT_CLASS_DEVICE
default y
help
Say Y here if you want to control the backlight of your display.
depends on FB && PCI && EXPERIMENTAL
select I2C_ALGOBIT if FB_SAVAGE_I2C
select I2C if FB_SAVAGE_I2C
+ select FB_DDC if FB_SAVAGE_I2C
select FB_MODE_HELPERS
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
kernel option `video=vfb:'.
To compile this driver as a module, choose M here: the
- module will be called vfb.
+ module will be called vfb. In order to load it, you must use
+ the vfb_enable=1 option.
If unsure, say N.
if VT