* For questions or problems with this driver, contact Texas Instruments
* technical support, or Al Borchers <alborchers@steinerpoint.com>, or
* Peter Berger <pberger@brimson.com>.
- *
+ *
* This driver needs this hotplug script in /etc/hotplug/usb/ti_usb_3410_5052
* or in /etc/hotplug.d/usb/ti_usb_3410_5052.hotplug to set the device
* configuration.
#include <linux/kernel.h>
#include <linux/errno.h>
+#include <linux/firmware.h>
#include <linux/init.h>
#include <linux/slab.h>
#include <linux/tty.h>
#include <linux/serial.h>
#include <linux/circ_buf.h>
#include <linux/mutex.h>
-#include <asm/uaccess.h>
-#include <asm/semaphore.h>
+#include <linux/uaccess.h>
#include <linux/usb.h>
#include <linux/usb/serial.h>
+#include <linux/firmware.h>
#include "ti_usb_3410_5052.h"
-#include "ti_fw_3410.h" /* firmware image for 3410 */
-#include "ti_fw_5052.h" /* firmware image for 5052 */
-
/* Defines */
static int ti_startup(struct usb_serial *serial);
static void ti_shutdown(struct usb_serial *serial);
-static int ti_open(struct usb_serial_port *port, struct file *file);
-static void ti_close(struct usb_serial_port *port, struct file *file);
-static int ti_write(struct usb_serial_port *port, const unsigned char *data,
- int count);
-static int ti_write_room(struct usb_serial_port *port);
-static int ti_chars_in_buffer(struct usb_serial_port *port);
-static void ti_throttle(struct usb_serial_port *port);
-static void ti_unthrottle(struct usb_serial_port *port);
-static int ti_ioctl(struct usb_serial_port *port, struct file *file, unsigned int cmd, unsigned long arg);
-static void ti_set_termios(struct usb_serial_port *port,
- struct ktermios *old_termios);
-static int ti_tiocmget(struct usb_serial_port *port, struct file *file);
-static int ti_tiocmset(struct usb_serial_port *port, struct file *file,
- unsigned int set, unsigned int clear);
-static void ti_break(struct usb_serial_port *port, int break_state);
+static int ti_open(struct tty_struct *tty, struct usb_serial_port *port,
+ struct file *file);
+static void ti_close(struct tty_struct *tty, struct usb_serial_port *port,
+ struct file *file);
+static int ti_write(struct tty_struct *tty, struct usb_serial_port *port,
+ const unsigned char *data, int count);
+static int ti_write_room(struct tty_struct *tty);
+static int ti_chars_in_buffer(struct tty_struct *tty);
+static void ti_throttle(struct tty_struct *tty);
+static void ti_unthrottle(struct tty_struct *tty);
+static int ti_ioctl(struct tty_struct *tty, struct file *file,
+ unsigned int cmd, unsigned long arg);
+static void ti_set_termios(struct tty_struct *tty,
+ struct usb_serial_port *port, struct ktermios *old_termios);
+static int ti_tiocmget(struct tty_struct *tty, struct file *file);
+static int ti_tiocmset(struct tty_struct *tty, struct file *file,
+ unsigned int set, unsigned int clear);
+static void ti_break(struct tty_struct *tty, int break_state);
static void ti_interrupt_callback(struct urb *urb);
static void ti_bulk_in_callback(struct urb *urb);
static void ti_bulk_out_callback(struct urb *urb);
static int ti_write_byte(struct ti_device *tdev, unsigned long addr,
__u8 mask, __u8 byte);
-static int ti_download_firmware(struct ti_device *tdev,
- unsigned char *firmware, unsigned int firmware_size);
+static int ti_download_firmware(struct ti_device *tdev, int type);
/* circular buffer */
static struct circ_buf *ti_buf_alloc(void);
.description = "TI USB 3410 1 port adapter",
.usb_driver = &ti_usb_driver,
.id_table = ti_id_table_3410,
- .num_interrupt_in = 1,
- .num_bulk_in = 1,
- .num_bulk_out = 1,
.num_ports = 1,
.attach = ti_startup,
.shutdown = ti_shutdown,
.description = "TI USB 5052 2 port adapter",
.usb_driver = &ti_usb_driver,
.id_table = ti_id_table_5052,
- .num_interrupt_in = 1,
- .num_bulk_in = 2,
- .num_bulk_out = 2,
.num_ports = 2,
.attach = ti_startup,
.shutdown = ti_shutdown,
MODULE_VERSION(TI_DRIVER_VERSION);
MODULE_LICENSE("GPL");
+MODULE_FIRMWARE("ti_3410.fw");
+MODULE_FIRMWARE("ti_5052.fw");
+
module_param(debug, bool, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(debug, "Enable debugging, 0=no, 1=yes");
module_param(low_latency, bool, S_IRUGO | S_IWUSR);
-MODULE_PARM_DESC(low_latency, "TTY low_latency flag, 0=off, 1=on, default is off");
+MODULE_PARM_DESC(low_latency,
+ "TTY low_latency flag, 0=off, 1=on, default is off");
module_param(closing_wait, int, S_IRUGO | S_IWUSR);
-MODULE_PARM_DESC(closing_wait, "Maximum wait for data to drain in close, in .01 secs, default is 4000");
+MODULE_PARM_DESC(closing_wait,
+ "Maximum wait for data to drain in close, in .01 secs, default is 4000");
module_param_array(vendor_3410, ushort, &vendor_3410_count, S_IRUGO);
-MODULE_PARM_DESC(vendor_3410, "Vendor ids for 3410 based devices, 1-5 short integers");
+MODULE_PARM_DESC(vendor_3410,
+ "Vendor ids for 3410 based devices, 1-5 short integers");
module_param_array(product_3410, ushort, &product_3410_count, S_IRUGO);
-MODULE_PARM_DESC(product_3410, "Product ids for 3410 based devices, 1-5 short integers");
+MODULE_PARM_DESC(product_3410,
+ "Product ids for 3410 based devices, 1-5 short integers");
module_param_array(vendor_5052, ushort, &vendor_5052_count, S_IRUGO);
-MODULE_PARM_DESC(vendor_5052, "Vendor ids for 5052 based devices, 1-5 short integers");
+MODULE_PARM_DESC(vendor_5052,
+ "Vendor ids for 5052 based devices, 1-5 short integers");
module_param_array(product_5052, ushort, &product_5052_count, S_IRUGO);
-MODULE_PARM_DESC(product_5052, "Product ids for 5052 based devices, 1-5 short integers");
+MODULE_PARM_DESC(product_5052,
+ "Product ids for 5052 based devices, 1-5 short integers");
MODULE_DEVICE_TABLE(usb, ti_id_table_combined);
static int __init ti_init(void)
{
- int i,j;
+ int i, j;
int ret;
/* insert extra vendor and product ids */
j = ARRAY_SIZE(ti_id_table_3410) - TI_EXTRA_VID_PID_COUNT - 1;
- for (i=0; i<min(vendor_3410_count,product_3410_count); i++,j++) {
+ for (i = 0; i < min(vendor_3410_count, product_3410_count); i++, j++) {
ti_id_table_3410[j].idVendor = vendor_3410[i];
ti_id_table_3410[j].idProduct = product_3410[i];
ti_id_table_3410[j].match_flags = USB_DEVICE_ID_MATCH_DEVICE;
}
j = ARRAY_SIZE(ti_id_table_5052) - TI_EXTRA_VID_PID_COUNT - 1;
- for (i=0; i<min(vendor_5052_count,product_5052_count); i++,j++) {
+ for (i = 0; i < min(vendor_5052_count, product_5052_count); i++, j++) {
ti_id_table_5052[j].idVendor = vendor_5052[i];
ti_id_table_5052[j].idProduct = product_5052[i];
ti_id_table_5052[j].match_flags = USB_DEVICE_ID_MATCH_DEVICE;
dbg("%s - product 0x%4X, num configurations %d, configuration value %d",
- __FUNCTION__, le16_to_cpu(dev->descriptor.idProduct),
+ __func__, le16_to_cpu(dev->descriptor.idProduct),
dev->descriptor.bNumConfigurations,
dev->actconfig->desc.bConfigurationValue);
/* create device structure */
tdev = kzalloc(sizeof(struct ti_device), GFP_KERNEL);
if (tdev == NULL) {
- dev_err(&dev->dev, "%s - out of memory\n", __FUNCTION__);
+ dev_err(&dev->dev, "%s - out of memory\n", __func__);
return -ENOMEM;
}
mutex_init(&tdev->td_open_close_lock);
/* determine device type */
if (usb_match_id(serial->interface, ti_id_table_3410))
tdev->td_is_3410 = 1;
- dbg("%s - device type is %s", __FUNCTION__, tdev->td_is_3410 ? "3410" : "5052");
+ dbg("%s - device type is %s", __func__,
+ tdev->td_is_3410 ? "3410" : "5052");
/* if we have only 1 configuration, download firmware */
if (dev->descriptor.bNumConfigurations == 1) {
-
if (tdev->td_is_3410)
- status = ti_download_firmware(tdev, ti_fw_3410,
- sizeof(ti_fw_3410));
+ status = ti_download_firmware(tdev, 3410);
else
- status = ti_download_firmware(tdev, ti_fw_5052,
- sizeof(ti_fw_5052));
+ status = ti_download_firmware(tdev, 5052);
if (status)
goto free_tdev;
status = -ENODEV;
goto free_tdev;
- }
+ }
/* the second configuration must be set (in sysfs by hotplug script) */
if (dev->actconfig->desc.bConfigurationValue == TI_BOOT_CONFIG) {
for (i = 0; i < serial->num_ports; ++i) {
tport = kzalloc(sizeof(struct ti_port), GFP_KERNEL);
if (tport == NULL) {
- dev_err(&dev->dev, "%s - out of memory\n", __FUNCTION__);
+ dev_err(&dev->dev, "%s - out of memory\n", __func__);
status = -ENOMEM;
goto free_tports;
}
spin_lock_init(&tport->tp_lock);
- tport->tp_uart_base_addr = (i == 0 ? TI_UART1_BASE_ADDR : TI_UART2_BASE_ADDR);
+ tport->tp_uart_base_addr = (i == 0 ?
+ TI_UART1_BASE_ADDR : TI_UART2_BASE_ADDR);
tport->tp_flags = low_latency ? ASYNC_LOW_LATENCY : 0;
tport->tp_closing_wait = closing_wait;
init_waitqueue_head(&tport->tp_msr_wait);
init_waitqueue_head(&tport->tp_write_wait);
tport->tp_write_buf = ti_buf_alloc();
if (tport->tp_write_buf == NULL) {
- dev_err(&dev->dev, "%s - out of memory\n", __FUNCTION__);
+ dev_err(&dev->dev, "%s - out of memory\n", __func__);
kfree(tport);
status = -ENOMEM;
goto free_tports;
usb_set_serial_port_data(serial->port[i], tport);
tport->tp_uart_mode = 0; /* default is RS232 */
}
-
+
return 0;
free_tports:
- for (--i; i>=0; --i) {
+ for (--i; i >= 0; --i) {
tport = usb_get_serial_port_data(serial->port[i]);
ti_buf_free(tport->tp_write_buf);
kfree(tport);
struct ti_device *tdev = usb_get_serial_data(serial);
struct ti_port *tport;
- dbg("%s", __FUNCTION__);
+ dbg("%s", __func__);
- for (i=0; i < serial->num_ports; ++i) {
+ for (i = 0; i < serial->num_ports; ++i) {
tport = usb_get_serial_port_data(serial->port[i]);
if (tport) {
ti_buf_free(tport->tp_write_buf);
}
-static int ti_open(struct usb_serial_port *port, struct file *file)
+static int ti_open(struct tty_struct *tty,
+ struct usb_serial_port *port, struct file *file)
{
struct ti_port *tport = usb_get_serial_port_data(port);
struct ti_device *tdev;
struct urb *urb;
int port_number;
int status;
- __u16 open_settings = (__u8)(TI_PIPE_MODE_CONTINOUS |
- TI_PIPE_TIMEOUT_ENABLE |
+ __u16 open_settings = (__u8)(TI_PIPE_MODE_CONTINOUS |
+ TI_PIPE_TIMEOUT_ENABLE |
(TI_TRANSFER_TIMEOUT << 2));
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
if (tport == NULL)
return -ENODEV;
if (mutex_lock_interruptible(&tdev->td_open_close_lock))
return -ERESTARTSYS;
- if (port->tty)
- port->tty->low_latency =
- (tport->tp_flags & ASYNC_LOW_LATENCY) ? 1 : 0;
+ if (tty)
+ tty->low_latency =
+ (tport->tp_flags & ASYNC_LOW_LATENCY) ? 1 : 0;
port_number = port->number - port->serial->minor;
/* start interrupt urb the first time a port is opened on this device */
if (tdev->td_open_port_count == 0) {
- dbg("%s - start interrupt in urb", __FUNCTION__);
+ dbg("%s - start interrupt in urb", __func__);
urb = tdev->td_serial->port[0]->interrupt_in_urb;
if (!urb) {
- dev_err(&port->dev, "%s - no interrupt urb\n", __FUNCTION__);
+ dev_err(&port->dev, "%s - no interrupt urb\n",
+ __func__);
status = -EINVAL;
goto release_lock;
}
urb->dev = dev;
status = usb_submit_urb(urb, GFP_KERNEL);
if (status) {
- dev_err(&port->dev, "%s - submit interrupt urb failed, %d\n", __FUNCTION__, status);
+ dev_err(&port->dev,
+ "%s - submit interrupt urb failed, %d\n",
+ __func__, status);
goto release_lock;
}
}
- ti_set_termios(port, port->tty->termios);
+ if (tty)
+ ti_set_termios(tty, port, tty->termios);
- dbg("%s - sending TI_OPEN_PORT", __FUNCTION__);
+ dbg("%s - sending TI_OPEN_PORT", __func__);
status = ti_command_out_sync(tdev, TI_OPEN_PORT,
(__u8)(TI_UART1_PORT + port_number), open_settings, NULL, 0);
if (status) {
- dev_err(&port->dev, "%s - cannot send open command, %d\n", __FUNCTION__, status);
+ dev_err(&port->dev, "%s - cannot send open command, %d\n",
+ __func__, status);
goto unlink_int_urb;
}
- dbg("%s - sending TI_START_PORT", __FUNCTION__);
+ dbg("%s - sending TI_START_PORT", __func__);
status = ti_command_out_sync(tdev, TI_START_PORT,
(__u8)(TI_UART1_PORT + port_number), 0, NULL, 0);
if (status) {
- dev_err(&port->dev, "%s - cannot send start command, %d\n", __FUNCTION__, status);
+ dev_err(&port->dev, "%s - cannot send start command, %d\n",
+ __func__, status);
goto unlink_int_urb;
}
- dbg("%s - sending TI_PURGE_PORT", __FUNCTION__);
+ dbg("%s - sending TI_PURGE_PORT", __func__);
status = ti_command_out_sync(tdev, TI_PURGE_PORT,
(__u8)(TI_UART1_PORT + port_number), TI_PURGE_INPUT, NULL, 0);
if (status) {
- dev_err(&port->dev, "%s - cannot clear input buffers, %d\n", __FUNCTION__, status);
+ dev_err(&port->dev, "%s - cannot clear input buffers, %d\n",
+ __func__, status);
goto unlink_int_urb;
}
status = ti_command_out_sync(tdev, TI_PURGE_PORT,
(__u8)(TI_UART1_PORT + port_number), TI_PURGE_OUTPUT, NULL, 0);
if (status) {
- dev_err(&port->dev, "%s - cannot clear output buffers, %d\n", __FUNCTION__, status);
+ dev_err(&port->dev, "%s - cannot clear output buffers, %d\n",
+ __func__, status);
goto unlink_int_urb;
}
usb_clear_halt(dev, port->write_urb->pipe);
usb_clear_halt(dev, port->read_urb->pipe);
- ti_set_termios(port, port->tty->termios);
+ if (tty)
+ ti_set_termios(tty, port, tty->termios);
- dbg("%s - sending TI_OPEN_PORT (2)", __FUNCTION__);
+ dbg("%s - sending TI_OPEN_PORT (2)", __func__);
status = ti_command_out_sync(tdev, TI_OPEN_PORT,
(__u8)(TI_UART1_PORT + port_number), open_settings, NULL, 0);
if (status) {
- dev_err(&port->dev, "%s - cannot send open command (2), %d\n", __FUNCTION__, status);
+ dev_err(&port->dev, "%s - cannot send open command (2), %d\n",
+ __func__, status);
goto unlink_int_urb;
}
- dbg("%s - sending TI_START_PORT (2)", __FUNCTION__);
+ dbg("%s - sending TI_START_PORT (2)", __func__);
status = ti_command_out_sync(tdev, TI_START_PORT,
(__u8)(TI_UART1_PORT + port_number), 0, NULL, 0);
if (status) {
- dev_err(&port->dev, "%s - cannot send start command (2), %d\n", __FUNCTION__, status);
+ dev_err(&port->dev, "%s - cannot send start command (2), %d\n",
+ __func__, status);
goto unlink_int_urb;
}
/* start read urb */
- dbg("%s - start read urb", __FUNCTION__);
+ dbg("%s - start read urb", __func__);
urb = port->read_urb;
if (!urb) {
- dev_err(&port->dev, "%s - no read urb\n", __FUNCTION__);
+ dev_err(&port->dev, "%s - no read urb\n", __func__);
status = -EINVAL;
goto unlink_int_urb;
}
urb->dev = dev;
status = usb_submit_urb(urb, GFP_KERNEL);
if (status) {
- dev_err(&port->dev, "%s - submit read urb failed, %d\n", __FUNCTION__, status);
+ dev_err(&port->dev, "%s - submit read urb failed, %d\n",
+ __func__, status);
goto unlink_int_urb;
}
usb_kill_urb(port->serial->port[0]->interrupt_in_urb);
release_lock:
mutex_unlock(&tdev->td_open_close_lock);
- dbg("%s - exit %d", __FUNCTION__, status);
+ dbg("%s - exit %d", __func__, status);
return status;
}
-static void ti_close(struct usb_serial_port *port, struct file *file)
+static void ti_close(struct tty_struct *tty, struct usb_serial_port *port,
+ struct file *file)
{
struct ti_device *tdev;
struct ti_port *tport;
int status;
int do_unlock;
- dbg("%s - port %d", __FUNCTION__, port->number);
-
+ dbg("%s - port %d", __func__, port->number);
+
tdev = usb_get_serial_data(port->serial);
tport = usb_get_serial_port_data(port);
if (tdev == NULL || tport == NULL)
port_number = port->number - port->serial->minor;
- dbg("%s - sending TI_CLOSE_PORT", __FUNCTION__);
+ dbg("%s - sending TI_CLOSE_PORT", __func__);
status = ti_command_out_sync(tdev, TI_CLOSE_PORT,
(__u8)(TI_UART1_PORT + port_number), 0, NULL, 0);
if (status)
- dev_err(&port->dev, "%s - cannot send close port command, %d\n" , __FUNCTION__, status);
+ dev_err(&port->dev,
+ "%s - cannot send close port command, %d\n"
+ , __func__, status);
/* if mutex_lock is interrupted, continue anyway */
do_unlock = !mutex_lock_interruptible(&tdev->td_open_close_lock);
if (do_unlock)
mutex_unlock(&tdev->td_open_close_lock);
- dbg("%s - exit", __FUNCTION__);
+ dbg("%s - exit", __func__);
}
-static int ti_write(struct usb_serial_port *port, const unsigned char *data,
- int count)
+static int ti_write(struct tty_struct *tty, struct usb_serial_port *port,
+ const unsigned char *data, int count)
{
struct ti_port *tport = usb_get_serial_port_data(port);
unsigned long flags;
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
if (count == 0) {
- dbg("%s - write request of 0 bytes", __FUNCTION__);
+ dbg("%s - write request of 0 bytes", __func__);
return 0;
}
}
-static int ti_write_room(struct usb_serial_port *port)
+static int ti_write_room(struct tty_struct *tty)
{
+ struct usb_serial_port *port = tty->driver_data;
struct ti_port *tport = usb_get_serial_port_data(port);
int room = 0;
unsigned long flags;
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
if (tport == NULL)
return -ENODEV;
-
+
spin_lock_irqsave(&tport->tp_lock, flags);
room = ti_buf_space_avail(tport->tp_write_buf);
spin_unlock_irqrestore(&tport->tp_lock, flags);
- dbg("%s - returns %d", __FUNCTION__, room);
+ dbg("%s - returns %d", __func__, room);
return room;
}
-static int ti_chars_in_buffer(struct usb_serial_port *port)
+static int ti_chars_in_buffer(struct tty_struct *tty)
{
+ struct usb_serial_port *port = tty->driver_data;
struct ti_port *tport = usb_get_serial_port_data(port);
int chars = 0;
unsigned long flags;
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
if (tport == NULL)
return -ENODEV;
chars = ti_buf_data_avail(tport->tp_write_buf);
spin_unlock_irqrestore(&tport->tp_lock, flags);
- dbg("%s - returns %d", __FUNCTION__, chars);
+ dbg("%s - returns %d", __func__, chars);
return chars;
}
-static void ti_throttle(struct usb_serial_port *port)
+static void ti_throttle(struct tty_struct *tty)
{
+ struct usb_serial_port *port = tty->driver_data;
struct ti_port *tport = usb_get_serial_port_data(port);
- struct tty_struct *tty;
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
if (tport == NULL)
return;
- tty = port->tty;
- if (!tty) {
- dbg("%s - no tty", __FUNCTION__);
- return;
- }
-
if (I_IXOFF(tty) || C_CRTSCTS(tty))
ti_stop_read(tport, tty);
}
-static void ti_unthrottle(struct usb_serial_port *port)
+static void ti_unthrottle(struct tty_struct *tty)
{
+ struct usb_serial_port *port = tty->driver_data;
struct ti_port *tport = usb_get_serial_port_data(port);
- struct tty_struct *tty;
int status;
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
if (tport == NULL)
return;
- tty = port->tty;
- if (!tty) {
- dbg("%s - no tty", __FUNCTION__);
- return;
- }
-
if (I_IXOFF(tty) || C_CRTSCTS(tty)) {
status = ti_restart_read(tport, tty);
if (status)
- dev_err(&port->dev, "%s - cannot restart read, %d\n", __FUNCTION__, status);
+ dev_err(&port->dev, "%s - cannot restart read, %d\n",
+ __func__, status);
}
}
-static int ti_ioctl(struct usb_serial_port *port, struct file *file,
+static int ti_ioctl(struct tty_struct *tty, struct file *file,
unsigned int cmd, unsigned long arg)
{
+ struct usb_serial_port *port = tty->driver_data;
struct ti_port *tport = usb_get_serial_port_data(port);
struct async_icount cnow;
struct async_icount cprev;
- dbg("%s - port %d, cmd = 0x%04X", __FUNCTION__, port->number, cmd);
+ dbg("%s - port %d, cmd = 0x%04X", __func__, port->number, cmd);
if (tport == NULL)
return -ENODEV;
switch (cmd) {
- case TIOCGSERIAL:
- dbg("%s - (%d) TIOCGSERIAL", __FUNCTION__, port->number);
- return ti_get_serial_info(tport, (struct serial_struct __user *)arg);
- break;
-
- case TIOCSSERIAL:
- dbg("%s - (%d) TIOCSSERIAL", __FUNCTION__, port->number);
- return ti_set_serial_info(tport, (struct serial_struct __user *)arg);
- break;
-
- case TIOCMIWAIT:
- dbg("%s - (%d) TIOCMIWAIT", __FUNCTION__, port->number);
- cprev = tport->tp_icount;
- while (1) {
- interruptible_sleep_on(&tport->tp_msr_wait);
- if (signal_pending(current))
- return -ERESTARTSYS;
- cnow = tport->tp_icount;
- if (cnow.rng == cprev.rng && cnow.dsr == cprev.dsr &&
- cnow.dcd == cprev.dcd && cnow.cts == cprev.cts)
- return -EIO; /* no change => error */
- if (((arg & TIOCM_RNG) && (cnow.rng != cprev.rng)) ||
- ((arg & TIOCM_DSR) && (cnow.dsr != cprev.dsr)) ||
- ((arg & TIOCM_CD) && (cnow.dcd != cprev.dcd)) ||
- ((arg & TIOCM_CTS) && (cnow.cts != cprev.cts)) ) {
- return 0;
- }
- cprev = cnow;
- }
- break;
-
- case TIOCGICOUNT:
- dbg("%s - (%d) TIOCGICOUNT RX=%d, TX=%d", __FUNCTION__, port->number, tport->tp_icount.rx, tport->tp_icount.tx);
- if (copy_to_user((void __user *)arg, &tport->tp_icount, sizeof(tport->tp_icount)))
- return -EFAULT;
- return 0;
+ case TIOCGSERIAL:
+ dbg("%s - (%d) TIOCGSERIAL", __func__, port->number);
+ return ti_get_serial_info(tport,
+ (struct serial_struct __user *)arg);
+ case TIOCSSERIAL:
+ dbg("%s - (%d) TIOCSSERIAL", __func__, port->number);
+ return ti_set_serial_info(tport,
+ (struct serial_struct __user *)arg);
+ case TIOCMIWAIT:
+ dbg("%s - (%d) TIOCMIWAIT", __func__, port->number);
+ cprev = tport->tp_icount;
+ while (1) {
+ interruptible_sleep_on(&tport->tp_msr_wait);
+ if (signal_pending(current))
+ return -ERESTARTSYS;
+ cnow = tport->tp_icount;
+ if (cnow.rng == cprev.rng && cnow.dsr == cprev.dsr &&
+ cnow.dcd == cprev.dcd && cnow.cts == cprev.cts)
+ return -EIO; /* no change => error */
+ if (((arg & TIOCM_RNG) && (cnow.rng != cprev.rng)) ||
+ ((arg & TIOCM_DSR) && (cnow.dsr != cprev.dsr)) ||
+ ((arg & TIOCM_CD) && (cnow.dcd != cprev.dcd)) ||
+ ((arg & TIOCM_CTS) && (cnow.cts != cprev.cts)))
+ return 0;
+ cprev = cnow;
+ }
+ break;
+ case TIOCGICOUNT:
+ dbg("%s - (%d) TIOCGICOUNT RX=%d, TX=%d",
+ __func__, port->number,
+ tport->tp_icount.rx, tport->tp_icount.tx);
+ if (copy_to_user((void __user *)arg, &tport->tp_icount,
+ sizeof(tport->tp_icount)))
+ return -EFAULT;
+ return 0;
}
-
return -ENOIOCTLCMD;
}
-static void ti_set_termios(struct usb_serial_port *port,
- struct ktermios *old_termios)
+static void ti_set_termios(struct tty_struct *tty,
+ struct usb_serial_port *port, struct ktermios *old_termios)
{
struct ti_port *tport = usb_get_serial_port_data(port);
- struct tty_struct *tty = port->tty;
struct ti_uart_config *config;
- tcflag_t cflag,iflag;
+ tcflag_t cflag, iflag;
int baud;
int status;
int port_number = port->number - port->serial->minor;
unsigned int mcr;
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
cflag = tty->termios->c_cflag;
iflag = tty->termios->c_iflag;
- dbg("%s - cflag %08x, iflag %08x", __FUNCTION__, cflag, iflag);
- dbg("%s - old clfag %08x, old iflag %08x", __FUNCTION__, old_termios->c_cflag, old_termios->c_iflag);
+ dbg("%s - cflag %08x, iflag %08x", __func__, cflag, iflag);
+ dbg("%s - old clfag %08x, old iflag %08x", __func__,
+ old_termios->c_cflag, old_termios->c_iflag);
if (tport == NULL)
return;
config = kmalloc(sizeof(*config), GFP_KERNEL);
if (!config) {
- dev_err(&port->dev, "%s - out of memory\n", __FUNCTION__);
+ dev_err(&port->dev, "%s - out of memory\n", __func__);
return;
}
config->bUartMode = (__u8)(tport->tp_uart_mode);
switch (cflag & CSIZE) {
- case CS5:
- config->bDataBits = TI_UART_5_DATA_BITS;
- break;
- case CS6:
- config->bDataBits = TI_UART_6_DATA_BITS;
- break;
- case CS7:
- config->bDataBits = TI_UART_7_DATA_BITS;
- break;
- default:
- case CS8:
- config->bDataBits = TI_UART_8_DATA_BITS;
- break;
+ case CS5:
+ config->bDataBits = TI_UART_5_DATA_BITS;
+ break;
+ case CS6:
+ config->bDataBits = TI_UART_6_DATA_BITS;
+ break;
+ case CS7:
+ config->bDataBits = TI_UART_7_DATA_BITS;
+ break;
+ default:
+ case CS8:
+ config->bDataBits = TI_UART_8_DATA_BITS;
+ break;
}
/* CMSPAR isn't supported by this driver */
}
} else {
config->wFlags &= ~TI_UART_ENABLE_PARITY_CHECKING;
- config->bParity = TI_UART_NO_PARITY;
+ config->bParity = TI_UART_NO_PARITY;
}
if (cflag & CSTOPB)
tty_encode_baud_rate(tty, baud, baud);
dbg("%s - BaudRate=%d, wBaudRate=%d, wFlags=0x%04X, bDataBits=%d, bParity=%d, bStopBits=%d, cXon=%d, cXoff=%d, bUartMode=%d",
- __FUNCTION__, baud, config->wBaudRate, config->wFlags, config->bDataBits, config->bParity, config->bStopBits, config->cXon, config->cXoff, config->bUartMode);
+ __func__, baud, config->wBaudRate, config->wFlags, config->bDataBits, config->bParity, config->bStopBits, config->cXon, config->cXoff, config->bUartMode);
cpu_to_be16s(&config->wBaudRate);
cpu_to_be16s(&config->wFlags);
(__u8)(TI_UART1_PORT + port_number), 0, (__u8 *)config,
sizeof(*config));
if (status)
- dev_err(&port->dev, "%s - cannot set config on port %d, %d\n", __FUNCTION__, port_number, status);
+ dev_err(&port->dev, "%s - cannot set config on port %d, %d\n",
+ __func__, port_number, status);
/* SET_CONFIG asserts RTS and DTR, reset them correctly */
mcr = tport->tp_shadow_mcr;
mcr &= ~(TI_MCR_DTR | TI_MCR_RTS);
status = ti_set_mcr(tport, mcr);
if (status)
- dev_err(&port->dev, "%s - cannot set modem control on port %d, %d\n", __FUNCTION__, port_number, status);
+ dev_err(&port->dev,
+ "%s - cannot set modem control on port %d, %d\n",
+ __func__, port_number, status);
kfree(config);
}
-static int ti_tiocmget(struct usb_serial_port *port, struct file *file)
+static int ti_tiocmget(struct tty_struct *tty, struct file *file)
{
+ struct usb_serial_port *port = tty->driver_data;
struct ti_port *tport = usb_get_serial_port_data(port);
unsigned int result;
unsigned int msr;
unsigned int mcr;
+ unsigned long flags;
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
if (tport == NULL)
return -ENODEV;
+ spin_lock_irqsave(&tport->tp_lock, flags);
msr = tport->tp_msr;
mcr = tport->tp_shadow_mcr;
+ spin_unlock_irqrestore(&tport->tp_lock, flags);
result = ((mcr & TI_MCR_DTR) ? TIOCM_DTR : 0)
| ((mcr & TI_MCR_RTS) ? TIOCM_RTS : 0)
| ((msr & TI_MSR_RI) ? TIOCM_RI : 0)
| ((msr & TI_MSR_DSR) ? TIOCM_DSR : 0);
- dbg("%s - 0x%04X", __FUNCTION__, result);
+ dbg("%s - 0x%04X", __func__, result);
return result;
}
-static int ti_tiocmset(struct usb_serial_port *port, struct file *file,
+static int ti_tiocmset(struct tty_struct *tty, struct file *file,
unsigned int set, unsigned int clear)
{
+ struct usb_serial_port *port = tty->driver_data;
struct ti_port *tport = usb_get_serial_port_data(port);
unsigned int mcr;
+ unsigned long flags;
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
if (tport == NULL)
return -ENODEV;
+ spin_lock_irqsave(&tport->tp_lock, flags);
mcr = tport->tp_shadow_mcr;
if (set & TIOCM_RTS)
mcr &= ~TI_MCR_DTR;
if (clear & TIOCM_LOOP)
mcr &= ~TI_MCR_LOOP;
+ spin_unlock_irqrestore(&tport->tp_lock, flags);
return ti_set_mcr(tport, mcr);
}
-static void ti_break(struct usb_serial_port *port, int break_state)
+static void ti_break(struct tty_struct *tty, int break_state)
{
+ struct usb_serial_port *port = tty->driver_data;
struct ti_port *tport = usb_get_serial_port_data(port);
int status;
- dbg("%s - state = %d", __FUNCTION__, break_state);
+ dbg("%s - state = %d", __func__, break_state);
if (tport == NULL)
return;
TI_LCR_BREAK, break_state == -1 ? TI_LCR_BREAK : 0);
if (status)
- dbg("%s - error setting break, %d", __FUNCTION__, status);
+ dbg("%s - error setting break, %d", __func__, status);
}
static void ti_interrupt_callback(struct urb *urb)
{
- struct ti_device *tdev = (struct ti_device *)urb->context;
+ struct ti_device *tdev = urb->context;
struct usb_serial_port *port;
struct usb_serial *serial = tdev->td_serial;
struct ti_port *tport;
int retval;
__u8 msr;
- dbg("%s", __FUNCTION__);
+ dbg("%s", __func__);
switch (status) {
case 0:
case -ECONNRESET:
case -ENOENT:
case -ESHUTDOWN:
- dbg("%s - urb shutting down, %d", __FUNCTION__, status);
+ dbg("%s - urb shutting down, %d", __func__, status);
tdev->td_urb_error = 1;
return;
default:
dev_err(dev, "%s - nonzero urb status, %d\n",
- __FUNCTION__, status);
+ __func__, status);
tdev->td_urb_error = 1;
goto exit;
}
if (length != 2) {
- dbg("%s - bad packet size, %d", __FUNCTION__, length);
+ dbg("%s - bad packet size, %d", __func__, length);
goto exit;
}
if (data[0] == TI_CODE_HARDWARE_ERROR) {
- dev_err(dev, "%s - hardware error, %d\n", __FUNCTION__, data[1]);
+ dev_err(dev, "%s - hardware error, %d\n", __func__, data[1]);
goto exit;
}
port_number = TI_GET_PORT_FROM_CODE(data[0]);
function = TI_GET_FUNC_FROM_CODE(data[0]);
- dbg("%s - port_number %d, function %d, data 0x%02X", __FUNCTION__, port_number, function, data[1]);
+ dbg("%s - port_number %d, function %d, data 0x%02X",
+ __func__, port_number, function, data[1]);
if (port_number >= serial->num_ports) {
- dev_err(dev, "%s - bad port number, %d\n", __FUNCTION__, port_number);
+ dev_err(dev, "%s - bad port number, %d\n",
+ __func__, port_number);
goto exit;
}
switch (function) {
case TI_CODE_DATA_ERROR:
- dev_err(dev, "%s - DATA ERROR, port %d, data 0x%02X\n", __FUNCTION__, port_number, data[1]);
+ dev_err(dev, "%s - DATA ERROR, port %d, data 0x%02X\n",
+ __func__, port_number, data[1]);
break;
case TI_CODE_MODEM_STATUS:
msr = data[1];
- dbg("%s - port %d, msr 0x%02X", __FUNCTION__, port_number, msr);
+ dbg("%s - port %d, msr 0x%02X", __func__, port_number, msr);
ti_handle_new_msr(tport, msr);
break;
default:
- dev_err(dev, "%s - unknown interrupt code, 0x%02X\n", __FUNCTION__, data[1]);
+ dev_err(dev, "%s - unknown interrupt code, 0x%02X\n",
+ __func__, data[1]);
break;
}
retval = usb_submit_urb(urb, GFP_ATOMIC);
if (retval)
dev_err(dev, "%s - resubmit interrupt urb failed, %d\n",
- __FUNCTION__, retval);
+ __func__, retval);
}
static void ti_bulk_in_callback(struct urb *urb)
{
- struct ti_port *tport = (struct ti_port *)urb->context;
+ struct ti_port *tport = urb->context;
struct usb_serial_port *port = tport->tp_port;
struct device *dev = &urb->dev->dev;
int status = urb->status;
int retval = 0;
- dbg("%s", __FUNCTION__);
+ dbg("%s", __func__);
switch (status) {
case 0:
case -ECONNRESET:
case -ENOENT:
case -ESHUTDOWN:
- dbg("%s - urb shutting down, %d", __FUNCTION__, status);
+ dbg("%s - urb shutting down, %d", __func__, status);
tport->tp_tdev->td_urb_error = 1;
wake_up_interruptible(&tport->tp_write_wait);
return;
default:
dev_err(dev, "%s - nonzero urb status, %d\n",
- __FUNCTION__, status );
+ __func__, status);
tport->tp_tdev->td_urb_error = 1;
wake_up_interruptible(&tport->tp_write_wait);
}
goto exit;
if (status) {
- dev_err(dev, "%s - stopping read!\n", __FUNCTION__);
+ dev_err(dev, "%s - stopping read!\n", __func__);
return;
}
- if (port->tty && urb->actual_length) {
- usb_serial_debug_data(debug, dev, __FUNCTION__,
+ if (port->port.tty && urb->actual_length) {
+ usb_serial_debug_data(debug, dev, __func__,
urb->actual_length, urb->transfer_buffer);
if (!tport->tp_is_open)
- dbg("%s - port closed, dropping data", __FUNCTION__);
+ dbg("%s - port closed, dropping data", __func__);
else
- ti_recv(&urb->dev->dev, port->tty, urb->transfer_buffer,
- urb->actual_length);
+ ti_recv(&urb->dev->dev, port->port.tty,
+ urb->transfer_buffer,
+ urb->actual_length);
spin_lock(&tport->tp_lock);
tport->tp_icount.rx += urb->actual_length;
spin_unlock(&tport->tp_lock);
if (retval)
dev_err(dev, "%s - resubmit read urb failed, %d\n",
- __FUNCTION__, retval);
+ __func__, retval);
}
static void ti_bulk_out_callback(struct urb *urb)
{
- struct ti_port *tport = (struct ti_port *)urb->context;
+ struct ti_port *tport = urb->context;
struct usb_serial_port *port = tport->tp_port;
struct device *dev = &urb->dev->dev;
int status = urb->status;
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
tport->tp_write_urb_in_use = 0;
case -ECONNRESET:
case -ENOENT:
case -ESHUTDOWN:
- dbg("%s - urb shutting down, %d", __FUNCTION__, status);
+ dbg("%s - urb shutting down, %d", __func__, status);
tport->tp_tdev->td_urb_error = 1;
wake_up_interruptible(&tport->tp_write_wait);
return;
default:
dev_err(dev, "%s - nonzero urb status, %d\n",
- __FUNCTION__, status);
+ __func__, status);
tport->tp_tdev->td_urb_error = 1;
wake_up_interruptible(&tport->tp_write_wait);
}
do {
cnt = tty_buffer_request_room(tty, length);
if (cnt < length) {
- dev_err(dev, "%s - dropping data, %d bytes lost\n", __FUNCTION__, length - cnt);
- if(cnt == 0)
+ dev_err(dev, "%s - dropping data, %d bytes lost\n",
+ __func__, length - cnt);
+ if (cnt == 0)
break;
}
tty_insert_flip_string(tty, data, cnt);
{
int count, result;
struct usb_serial_port *port = tport->tp_port;
- struct tty_struct *tty = port->tty;
+ struct tty_struct *tty = port->port.tty; /* FIXME */
unsigned long flags;
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
spin_lock_irqsave(&tport->tp_lock, flags);
spin_unlock_irqrestore(&tport->tp_lock, flags);
- usb_serial_debug_data(debug, &port->dev, __FUNCTION__, count, port->write_urb->transfer_buffer);
+ usb_serial_debug_data(debug, &port->dev, __func__, count,
+ port->write_urb->transfer_buffer);
usb_fill_bulk_urb(port->write_urb, port->serial->dev,
usb_sndbulkpipe(port->serial->dev,
result = usb_submit_urb(port->write_urb, GFP_ATOMIC);
if (result) {
- dev_err(&port->dev, "%s - submit write urb failed, %d\n", __FUNCTION__, result);
- tport->tp_write_urb_in_use = 0;
+ dev_err(&port->dev, "%s - submit write urb failed, %d\n",
+ __func__, result);
+ tport->tp_write_urb_in_use = 0;
/* TODO: reschedule ti_send */
} else {
spin_lock_irqsave(&tport->tp_lock, flags);
static int ti_set_mcr(struct ti_port *tport, unsigned int mcr)
{
+ unsigned long flags;
int status;
status = ti_write_byte(tport->tp_tdev,
tport->tp_uart_base_addr + TI_UART_OFFSET_MCR,
TI_MCR_RTS | TI_MCR_DTR | TI_MCR_LOOP, mcr);
+ spin_lock_irqsave(&tport->tp_lock, flags);
if (!status)
tport->tp_shadow_mcr = mcr;
+ spin_unlock_irqrestore(&tport->tp_lock, flags);
return status;
}
static int ti_get_lsr(struct ti_port *tport)
{
- int size,status;
+ int size, status;
struct ti_device *tdev = tport->tp_tdev;
struct usb_serial_port *port = tport->tp_port;
int port_number = port->number - port->serial->minor;
struct ti_port_status *data;
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
size = sizeof(struct ti_port_status);
data = kmalloc(size, GFP_KERNEL);
if (!data) {
- dev_err(&port->dev, "%s - out of memory\n", __FUNCTION__);
+ dev_err(&port->dev, "%s - out of memory\n", __func__);
return -ENOMEM;
}
status = ti_command_in_sync(tdev, TI_GET_PORT_STATUS,
(__u8)(TI_UART1_PORT+port_number), 0, (__u8 *)data, size);
if (status) {
- dev_err(&port->dev, "%s - get port status command failed, %d\n", __FUNCTION__, status);
+ dev_err(&port->dev,
+ "%s - get port status command failed, %d\n",
+ __func__, status);
goto free_data;
}
- dbg("%s - lsr 0x%02X", __FUNCTION__, data->bLSR);
+ dbg("%s - lsr 0x%02X", __func__, data->bLSR);
tport->tp_lsr = data->bLSR;
return -EFAULT;
tport->tp_flags = new_serial.flags & TI_SET_SERIAL_FLAGS;
- if (port->tty)
- port->tty->low_latency =
+ /* FIXME */
+ if (port->port.tty)
+ port->port.tty->low_latency =
(tport->tp_flags & ASYNC_LOW_LATENCY) ? 1 : 0;
tport->tp_closing_wait = new_serial.closing_wait;
struct tty_struct *tty;
unsigned long flags;
- dbg("%s - msr 0x%02X", __FUNCTION__, msr);
+ dbg("%s - msr 0x%02X", __func__, msr);
if (msr & TI_MSR_DELTA_MASK) {
spin_lock_irqsave(&tport->tp_lock, flags);
tport->tp_msr = msr & TI_MSR_MASK;
/* handle CTS flow control */
- tty = tport->tp_port->tty;
+ tty = tport->tp_port->port.tty;
if (tty && C_CRTSCTS(tty)) {
if (msr & TI_MSR_CTS) {
tty->hw_stopped = 0;
struct usb_serial_port *port = tport->tp_port;
wait_queue_t wait;
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
spin_lock_irq(&tport->tp_lock);
struct ti_write_data_bytes *data;
struct device *dev = &tdev->td_serial->dev->dev;
- dbg("%s - addr 0x%08lX, mask 0x%02X, byte 0x%02X", __FUNCTION__, addr, mask, byte);
+ dbg("%s - addr 0x%08lX, mask 0x%02X, byte 0x%02X",
+ __func__, addr, mask, byte);
size = sizeof(struct ti_write_data_bytes) + 2;
data = kmalloc(size, GFP_KERNEL);
if (!data) {
- dev_err(dev, "%s - out of memory\n", __FUNCTION__);
+ dev_err(dev, "%s - out of memory\n", __func__);
return -ENOMEM;
}
(__u8 *)data, size);
if (status < 0)
- dev_err(dev, "%s - failed, %d\n", __FUNCTION__, status);
+ dev_err(dev, "%s - failed, %d\n", __func__, status);
kfree(data);
return status;
}
-
-static int ti_download_firmware(struct ti_device *tdev,
- unsigned char *firmware, unsigned int firmware_size)
+static int ti_do_download(struct usb_device *dev, int pipe,
+ u8 *buffer, int size)
{
- int status = 0;
- int buffer_size;
int pos;
- int len;
+ u8 cs = 0;
int done;
- __u8 cs = 0;
- __u8 *buffer;
- struct usb_device *dev = tdev->td_serial->dev;
struct ti_firmware_header *header;
- unsigned int pipe = usb_sndbulkpipe(dev,
- tdev->td_serial->port[0]->bulk_out_endpointAddress);
-
-
- buffer_size = TI_FIRMWARE_BUF_SIZE + sizeof(struct ti_firmware_header);
- buffer = kmalloc(buffer_size, GFP_KERNEL);
- if (!buffer) {
- dev_err(&dev->dev, "%s - out of memory\n", __FUNCTION__);
- return -ENOMEM;
- }
-
- memcpy(buffer, firmware, firmware_size);
- memset(buffer+firmware_size, 0xff, buffer_size-firmware_size);
+ int status;
+ int len;
- for(pos = sizeof(struct ti_firmware_header); pos < buffer_size; pos++)
+ for (pos = sizeof(struct ti_firmware_header); pos < size; pos++)
cs = (__u8)(cs + buffer[pos]);
header = (struct ti_firmware_header *)buffer;
- header->wLength = cpu_to_le16((__u16)(buffer_size - sizeof(struct ti_firmware_header)));
+ header->wLength = cpu_to_le16((__u16)(size
+ - sizeof(struct ti_firmware_header)));
header->bCheckSum = cs;
- dbg("%s - downloading firmware", __FUNCTION__);
- for (pos = 0; pos < buffer_size; pos += done) {
- len = min(buffer_size - pos, TI_DOWNLOAD_MAX_PACKET_SIZE);
- status = usb_bulk_msg(dev, pipe, buffer+pos, len, &done, 1000);
+ dbg("%s - downloading firmware", __func__);
+ for (pos = 0; pos < size; pos += done) {
+ len = min(size - pos, TI_DOWNLOAD_MAX_PACKET_SIZE);
+ status = usb_bulk_msg(dev, pipe, buffer + pos, len,
+ &done, 1000);
if (status)
break;
}
+ return status;
+}
+
+static int ti_download_firmware(struct ti_device *tdev, int type)
+{
+ int status = -ENOMEM;
+ int buffer_size;
+ __u8 *buffer;
+ struct usb_device *dev = tdev->td_serial->dev;
+ unsigned int pipe = usb_sndbulkpipe(dev,
+ tdev->td_serial->port[0]->bulk_out_endpointAddress);
+ const struct firmware *fw_p;
+ char buf[32];
+ sprintf(buf, "ti_usb-%d.bin", type);
- kfree(buffer);
+ if (request_firmware(&fw_p, buf, &dev->dev)) {
+ dev_err(&dev->dev, "%s - firmware not found\n", __func__);
+ return -ENOENT;
+ }
+ if (fw_p->size > TI_FIRMWARE_BUF_SIZE) {
+ dev_err(&dev->dev, "%s - firmware too large\n", __func__);
+ return -ENOENT;
+ }
+ buffer_size = TI_FIRMWARE_BUF_SIZE + sizeof(struct ti_firmware_header);
+ buffer = kmalloc(buffer_size, GFP_KERNEL);
+ if (buffer) {
+ memcpy(buffer, fw_p->data, fw_p->size);
+ memset(buffer + fw_p->size, 0xff, buffer_size - fw_p->size);
+ ti_do_download(dev, pipe, buffer, fw_p->size);
+ kfree(buffer);
+ }
+ release_firmware(fw_p);
if (status) {
- dev_err(&dev->dev, "%s - error downloading firmware, %d\n", __FUNCTION__, status);
+ dev_err(&dev->dev, "%s - error downloading firmware, %d\n",
+ __func__, status);
return status;
}
- dbg("%s - download successful", __FUNCTION__);
+ dbg("%s - download successful", __func__);
return 0;
}
static int ti_buf_data_avail(struct circ_buf *cb)
{
- return CIRC_CNT(cb->head,cb->tail,TI_WRITE_BUF_SIZE);
+ return CIRC_CNT(cb->head, cb->tail, TI_WRITE_BUF_SIZE);
}
static int ti_buf_space_avail(struct circ_buf *cb)
{
- return CIRC_SPACE(cb->head,cb->tail,TI_WRITE_BUF_SIZE);
+ return CIRC_SPACE(cb->head, cb->tail, TI_WRITE_BUF_SIZE);
}
projects / linux-2.6 / blobdiff