/*
* Later day 2.6.0-test kernels have new baud rates like B230400 which
* we do not know how to support. We ignore them for the moment.
- * XXX Rate-limit the error message, it's user triggerable.
*/
-static int mct_u232_calculate_baud_rate(struct usb_serial *serial, int value)
+static int mct_u232_calculate_baud_rate(struct usb_serial *serial, speed_t value, speed_t *result)
{
+ *result = value;
+
if (le16_to_cpu(serial->dev->descriptor.idProduct) == MCT_U232_SITECOM_PID
|| le16_to_cpu(serial->dev->descriptor.idProduct) == MCT_U232_BELKIN_F5U109_PID) {
switch (value) {
- case B300: return 0x01;
- case B600: return 0x02; /* this one not tested */
- case B1200: return 0x03;
- case B2400: return 0x04;
- case B4800: return 0x06;
- case B9600: return 0x08;
- case B19200: return 0x09;
- case B38400: return 0x0a;
- case B57600: return 0x0b;
- case B115200: return 0x0c;
+ case 300: return 0x01;
+ case 600: return 0x02; /* this one not tested */
+ case 1200: return 0x03;
+ case 2400: return 0x04;
+ case 4800: return 0x06;
+ case 9600: return 0x08;
+ case 19200: return 0x09;
+ case 38400: return 0x0a;
+ case 57600: return 0x0b;
+ case 115200: return 0x0c;
default:
- err("MCT USB-RS232: unsupported baudrate request 0x%x,"
- " using default of B9600", value);
+ *result = 9600;
return 0x08;
}
} else {
+ /* FIXME: Can we use any divider - should we do
+ divider = 115200/value;
+ real baud = 115200/divider */
switch (value) {
- case B300: value = 300; break;
- case B600: value = 600; break;
- case B1200: value = 1200; break;
- case B2400: value = 2400; break;
- case B4800: value = 4800; break;
- case B9600: value = 9600; break;
- case B19200: value = 19200; break;
- case B38400: value = 38400; break;
- case B57600: value = 57600; break;
- case B115200: value = 115200; break;
+ case 300: break;
+ case 600: break;
+ case 1200: break;
+ case 2400: break;
+ case 4800: break;
+ case 9600: break;
+ case 19200: break;
+ case 38400: break;
+ case 57600: break;
+ case 115200: break;
default:
- err("MCT USB-RS232: unsupported baudrate request 0x%x,"
- " using default of B9600", value);
value = 9600;
+ *result = 9600;
}
return 115200/value;
}
}
static int mct_u232_set_baud_rate(struct usb_serial *serial, struct usb_serial_port *port,
- int value)
+ speed_t value)
{
__le32 divisor;
int rc;
unsigned char zero_byte = 0;
unsigned char cts_enable_byte = 0;
+ speed_t speed;
- divisor = cpu_to_le32(mct_u232_calculate_baud_rate(serial, value));
+ divisor = cpu_to_le32(mct_u232_calculate_baud_rate(serial, value, &speed));
rc = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
MCT_U232_SET_BAUD_RATE_REQUEST,
MCT_U232_SET_REQUEST_TYPE,
0, 0, &divisor, MCT_U232_SET_BAUD_RATE_SIZE,
WDR_TIMEOUT);
- if (rc < 0)
+ if (rc < 0) /*FIXME: What value speed results */
err("Set BAUD RATE %d failed (error = %d)", value, rc);
+ else
+ tty_encode_baud_rate(port->tty, speed, speed);
dbg("set_baud_rate: value: 0x%x, divisor: 0x%x", value, divisor);
/* Mimic the MCT-supplied Windows driver (version 1.21P.0104), which
static void mct_u232_close (struct usb_serial_port *port, struct file *filp)
{
unsigned int c_cflag;
- unsigned long flags;
unsigned int control_state;
struct mct_u232_private *priv = usb_get_serial_port_data(port);
dbg("%s port %d", __FUNCTION__, port->number);
if (port->tty) {
c_cflag = port->tty->termios->c_cflag;
- if (c_cflag & HUPCL) {
- /* drop DTR and RTS */
- spin_lock_irqsave(&priv->lock, flags);
- priv->control_state &= ~(TIOCM_DTR | TIOCM_RTS);
- control_state = priv->control_state;
- spin_unlock_irqrestore(&priv->lock, flags);
- mct_u232_set_modem_ctrl(port->serial, control_state);
+ mutex_lock(&port->serial->disc_mutex);
+ if (c_cflag & HUPCL && !port->serial->disconnected) {
+ /* drop DTR and RTS */
+ spin_lock_irq(&priv->lock);
+ priv->control_state &= ~(TIOCM_DTR | TIOCM_RTS);
+ control_state = priv->control_state;
+ spin_unlock_irq(&priv->lock);
+ mct_u232_set_modem_ctrl(port->serial, control_state);
}
+ mutex_unlock(&port->serial->disc_mutex);
}
{
struct usb_serial *serial = port->serial;
struct mct_u232_private *priv = usb_get_serial_port_data(port);
- unsigned int cflag = port->tty->termios->c_cflag;
+ struct ktermios *termios = port->tty->termios;
+ unsigned int cflag = termios->c_cflag;
unsigned int old_cflag = old_termios->c_cflag;
unsigned long flags;
unsigned int control_state;
mct_u232_set_modem_ctrl(serial, control_state);
}
- mct_u232_set_baud_rate(serial, port, cflag & CBAUD);
+ mct_u232_set_baud_rate(serial, port, tty_get_baud_rate(port->tty));
if ((cflag & CBAUD) == B0 ) {
dbg("%s: baud is B0", __FUNCTION__);
break;
}
+ termios->c_cflag &= ~CMSPAR;
+
/* set the number of stop bits */
last_lcr |= (cflag & CSTOPB) ?
MCT_U232_STOP_BITS_2 : MCT_U232_STOP_BITS_1;
projects / linux-2.6 / blobdiff