.description = "MCT U232",
.usb_driver = &mct_u232_driver,
.id_table = id_table_combined,
- .num_interrupt_in = 2,
- .num_bulk_in = 0,
- .num_bulk_out = 1,
.num_ports = 1,
.open = mct_u232_open,
.close = mct_u232_close,
/*
* Later day 2.6.0-test kernels have new baud rates like B230400 which
* we do not know how to support. We ignore them for the moment.
- * XXX Rate-limit the error message, it's user triggerable.
*/
-static int mct_u232_calculate_baud_rate(struct usb_serial *serial, speed_t value)
+static int mct_u232_calculate_baud_rate(struct usb_serial *serial, speed_t value, speed_t *result)
{
+ *result = value;
+
if (le16_to_cpu(serial->dev->descriptor.idProduct) == MCT_U232_SITECOM_PID
|| le16_to_cpu(serial->dev->descriptor.idProduct) == MCT_U232_BELKIN_F5U109_PID) {
switch (value) {
case 57600: return 0x0b;
case 115200: return 0x0c;
default:
- err("MCT USB-RS232: unsupported baudrate request 0x%x,"
- " using default of B9600", value);
+ *result = 9600;
return 0x08;
}
} else {
+ /* FIXME: Can we use any divider - should we do
+ divider = 115200/value;
+ real baud = 115200/divider */
switch (value) {
case 300: break;
case 600: break;
case 57600: break;
case 115200: break;
default:
- err("MCT USB-RS232: unsupported baudrate request 0x%x,"
- " using default of B9600", value);
value = 9600;
+ *result = 9600;
}
return 115200/value;
}
int rc;
unsigned char zero_byte = 0;
unsigned char cts_enable_byte = 0;
+ speed_t speed;
- divisor = cpu_to_le32(mct_u232_calculate_baud_rate(serial, value));
+ divisor = cpu_to_le32(mct_u232_calculate_baud_rate(serial, value, &speed));
rc = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
MCT_U232_SET_BAUD_RATE_REQUEST,
MCT_U232_SET_REQUEST_TYPE,
0, 0, &divisor, MCT_U232_SET_BAUD_RATE_SIZE,
WDR_TIMEOUT);
- if (rc < 0)
+ if (rc < 0) /*FIXME: What value speed results */
err("Set BAUD RATE %d failed (error = %d)", value, rc);
+ else
+ tty_encode_baud_rate(port->tty, speed, speed);
dbg("set_baud_rate: value: 0x%x, divisor: 0x%x", value, divisor);
/* Mimic the MCT-supplied Windows driver (version 1.21P.0104), which
struct mct_u232_private *priv;
int i;
- dbg("%s", __FUNCTION__);
+ dbg("%s", __func__);
for (i=0; i < serial->num_ports; ++i) {
/* My special items, the standard routines free my urbs */
unsigned char last_lcr;
unsigned char last_msr;
- dbg("%s port %d", __FUNCTION__, port->number);
+ dbg("%s port %d", __func__, port->number);
/* Compensate for a hardware bug: although the Sitecom U232-P25
* device reports a maximum output packet size of 32 bytes,
static void mct_u232_close (struct usb_serial_port *port, struct file *filp)
{
unsigned int c_cflag;
- unsigned long flags;
unsigned int control_state;
struct mct_u232_private *priv = usb_get_serial_port_data(port);
- dbg("%s port %d", __FUNCTION__, port->number);
+ dbg("%s port %d", __func__, port->number);
if (port->tty) {
c_cflag = port->tty->termios->c_cflag;
- if (c_cflag & HUPCL) {
- /* drop DTR and RTS */
- spin_lock_irqsave(&priv->lock, flags);
- priv->control_state &= ~(TIOCM_DTR | TIOCM_RTS);
- control_state = priv->control_state;
- spin_unlock_irqrestore(&priv->lock, flags);
- mct_u232_set_modem_ctrl(port->serial, control_state);
+ mutex_lock(&port->serial->disc_mutex);
+ if (c_cflag & HUPCL && !port->serial->disconnected) {
+ /* drop DTR and RTS */
+ spin_lock_irq(&priv->lock);
+ priv->control_state &= ~(TIOCM_DTR | TIOCM_RTS);
+ control_state = priv->control_state;
+ spin_unlock_irq(&priv->lock);
+ mct_u232_set_modem_ctrl(port->serial, control_state);
}
+ mutex_unlock(&port->serial->disc_mutex);
}
static void mct_u232_read_int_callback (struct urb *urb)
{
- struct usb_serial_port *port = (struct usb_serial_port *)urb->context;
+ struct usb_serial_port *port = urb->context;
struct mct_u232_private *priv = usb_get_serial_port_data(port);
struct usb_serial *serial = port->serial;
struct tty_struct *tty;
case -ESHUTDOWN:
/* this urb is terminated, clean up */
dbg("%s - urb shutting down with status: %d",
- __FUNCTION__, status);
+ __func__, status);
return;
default:
dbg("%s - nonzero urb status received: %d",
- __FUNCTION__, status);
+ __func__, status);
goto exit;
}
if (!serial) {
- dbg("%s - bad serial pointer, exiting", __FUNCTION__);
+ dbg("%s - bad serial pointer, exiting", __func__);
return;
}
- dbg("%s - port %d", __FUNCTION__, port->number);
- usb_serial_debug_data(debug, &port->dev, __FUNCTION__, urb->actual_length, data);
+ dbg("%s - port %d", __func__, port->number);
+ usb_serial_debug_data(debug, &port->dev, __func__, urb->actual_length, data);
/*
* Work-a-round: handle the 'usual' bulk-in pipe here
retval = usb_submit_urb (urb, GFP_ATOMIC);
if (retval)
err ("%s - usb_submit_urb failed with result %d",
- __FUNCTION__, retval);
+ __func__, retval);
} /* mct_u232_read_int_callback */
static void mct_u232_set_termios (struct usb_serial_port *port,
{
struct usb_serial *serial = port->serial;
struct mct_u232_private *priv = usb_get_serial_port_data(port);
- unsigned int cflag = port->tty->termios->c_cflag;
+ struct ktermios *termios = port->tty->termios;
+ unsigned int cflag = termios->c_cflag;
unsigned int old_cflag = old_termios->c_cflag;
unsigned long flags;
unsigned int control_state;
/* reassert DTR and RTS on transition from B0 */
if ((old_cflag & CBAUD) == B0) {
- dbg("%s: baud was B0", __FUNCTION__);
+ dbg("%s: baud was B0", __func__);
control_state |= TIOCM_DTR | TIOCM_RTS;
mct_u232_set_modem_ctrl(serial, control_state);
}
mct_u232_set_baud_rate(serial, port, tty_get_baud_rate(port->tty));
if ((cflag & CBAUD) == B0 ) {
- dbg("%s: baud is B0", __FUNCTION__);
+ dbg("%s: baud is B0", __func__);
/* Drop RTS and DTR */
control_state &= ~(TIOCM_DTR | TIOCM_RTS);
mct_u232_set_modem_ctrl(serial, control_state);
break;
}
+ termios->c_cflag &= ~CMSPAR;
+
/* set the number of stop bits */
last_lcr |= (cflag & CSTOPB) ?
MCT_U232_STOP_BITS_2 : MCT_U232_STOP_BITS_1;
unsigned char lcr;
unsigned long flags;
- dbg("%sstate=%d", __FUNCTION__, break_state);
+ dbg("%sstate=%d", __func__, break_state);
spin_lock_irqsave(&priv->lock, flags);
lcr = priv->last_lcr;
unsigned int control_state;
unsigned long flags;
- dbg("%s", __FUNCTION__);
+ dbg("%s", __func__);
spin_lock_irqsave(&priv->lock, flags);
control_state = priv->control_state;
unsigned int control_state;
unsigned long flags;
- dbg("%s", __FUNCTION__);
+ dbg("%s", __func__);
spin_lock_irqsave(&priv->lock, flags);
control_state = priv->control_state;
static int mct_u232_ioctl (struct usb_serial_port *port, struct file * file,
unsigned int cmd, unsigned long arg)
{
- dbg("%scmd=0x%x", __FUNCTION__, cmd);
+ dbg("%scmd=0x%x", __func__, cmd);
/* Based on code from acm.c and others */
switch (cmd) {
return 0;
default:
- dbg("%s: arg not supported - 0x%04x", __FUNCTION__,cmd);
+ dbg("%s: arg not supported - 0x%04x", __func__,cmd);
return(-ENOIOCTLCMD);
break;
}
struct tty_struct *tty;
tty = port->tty;
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
spin_lock_irqsave(&priv->lock, flags);
priv->rx_flags |= THROTTLED;
unsigned int control_state;
struct tty_struct *tty;
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
tty = port->tty;
spin_lock_irqsave(&priv->lock, flags);
projects / linux-2.6 / blobdiff