struct tty_struct *tty = port->tty;
unsigned char *data = urb->transfer_buffer;
int i;
- int status;
+ int retval;
+ int status = urb->status;
struct keyspan_pda_private *priv;
priv = usb_get_serial_port_data(port);
- switch (urb->status) {
+ switch (status) {
case 0:
/* success */
break;
case -ENOENT:
case -ESHUTDOWN:
/* this urb is terminated, clean up */
- dbg("%s - urb shutting down with status: %d", __FUNCTION__, urb->status);
+ dbg("%s - urb shutting down with status: %d",
+ __FUNCTION__, status);
return;
default:
- dbg("%s - nonzero urb status received: %d", __FUNCTION__, urb->status);
+ dbg("%s - nonzero urb status received: %d",
+ __FUNCTION__, status);
goto exit;
}
}
exit:
- status = usb_submit_urb (urb, GFP_ATOMIC);
- if (status)
+ retval = usb_submit_urb (urb, GFP_ATOMIC);
+ if (retval)
err ("%s - usb_submit_urb failed with result %d",
- __FUNCTION__, status);
+ __FUNCTION__, retval);
}
}
-static int keyspan_pda_setbaud (struct usb_serial *serial, int baud)
+static speed_t keyspan_pda_setbaud (struct usb_serial *serial, speed_t baud)
{
int rc;
int bindex;
case 38400: bindex = 7; break;
case 57600: bindex = 8; break;
case 115200: bindex = 9; break;
- default: return -EINVAL;
+ default:
+ bindex = 5; /* Default to 9600 */
+ baud = 9600;
}
/* rather than figure out how to sleep while waiting for this
NULL, /* &data */
0, /* size */
2000); /* timeout */
- return(rc);
+ if (rc < 0)
+ return 0;
+ return baud;
}
struct ktermios *old_termios)
{
struct usb_serial *serial = port->serial;
- unsigned int cflag = port->tty->termios->c_cflag;
+ speed_t speed;
/* cflag specifies lots of stuff: number of stop bits, parity, number
of data bits, baud. What can the device actually handle?:
For now, just do baud. */
- switch (cflag & CBAUD) {
- /* we could support more values here, just need to calculate
- the necessary divisors in the firmware. <asm/termbits.h>
- has the Bnnn constants. */
- case B110: keyspan_pda_setbaud(serial, 110); break;
- case B300: keyspan_pda_setbaud(serial, 300); break;
- case B1200: keyspan_pda_setbaud(serial, 1200); break;
- case B2400: keyspan_pda_setbaud(serial, 2400); break;
- case B4800: keyspan_pda_setbaud(serial, 4800); break;
- case B9600: keyspan_pda_setbaud(serial, 9600); break;
- case B19200: keyspan_pda_setbaud(serial, 19200); break;
- case B38400: keyspan_pda_setbaud(serial, 38400); break;
- case B57600: keyspan_pda_setbaud(serial, 57600); break;
- case B115200: keyspan_pda_setbaud(serial, 115200); break;
- default: dbg("can't handle requested baud rate"); break;
+ speed = tty_get_baud_rate(port->tty);
+ speed = keyspan_pda_setbaud(serial, speed);
+
+ if (speed == 0) {
+ dbg("can't handle requested baud rate");
+ /* It hasn't changed so.. */
+ speed = tty_termios_baud_rate(old_termios);
}
+ /* Only speed can change so copy the old h/w parameters
+ then encode the new speed */
+ tty_termios_copy_hw(port->tty->termios, old_termios);
+ tty_encode_baud_rate(port->tty, speed, speed);
}