struct usb_serial_port *port,
int reset_port);
-/* Struct used for firmware - increased size of data section
- to allow Keyspan's 'C' firmware struct to be used unmodified */
-struct ezusb_hex_record {
- __u16 address;
- __u8 data_size;
- __u8 data[64];
-};
-
-/* Conditionally include firmware images, if they aren't
- included create a null pointer instead. Current
- firmware images aren't optimised to remove duplicate
- addresses in the image itself. */
-#ifdef CONFIG_USB_SERIAL_KEYSPAN_USA28
- #include "keyspan_usa28_fw.h"
-#else
- static const struct ezusb_hex_record *keyspan_usa28_firmware = NULL;
-#endif
-
-#ifdef CONFIG_USB_SERIAL_KEYSPAN_USA28X
- #include "keyspan_usa28x_fw.h"
-#else
- static const struct ezusb_hex_record *keyspan_usa28x_firmware = NULL;
-#endif
-
-#ifdef CONFIG_USB_SERIAL_KEYSPAN_USA28XA
- #include "keyspan_usa28xa_fw.h"
-#else
- static const struct ezusb_hex_record *keyspan_usa28xa_firmware = NULL;
-#endif
-
-#ifdef CONFIG_USB_SERIAL_KEYSPAN_USA28XB
- #include "keyspan_usa28xb_fw.h"
-#else
- static const struct ezusb_hex_record *keyspan_usa28xb_firmware = NULL;
-#endif
-
-#ifdef CONFIG_USB_SERIAL_KEYSPAN_USA19
- #include "keyspan_usa19_fw.h"
-#else
- static const struct ezusb_hex_record *keyspan_usa19_firmware = NULL;
-#endif
-
-#ifdef CONFIG_USB_SERIAL_KEYSPAN_USA19QI
- #include "keyspan_usa19qi_fw.h"
-#else
- static const struct ezusb_hex_record *keyspan_usa19qi_firmware = NULL;
-#endif
-
-#ifdef CONFIG_USB_SERIAL_KEYSPAN_MPR
- #include "keyspan_mpr_fw.h"
-#else
- static const struct ezusb_hex_record *keyspan_mpr_firmware = NULL;
-#endif
-
-#ifdef CONFIG_USB_SERIAL_KEYSPAN_USA19QW
- #include "keyspan_usa19qw_fw.h"
-#else
- static const struct ezusb_hex_record *keyspan_usa19qw_firmware = NULL;
-#endif
-
-#ifdef CONFIG_USB_SERIAL_KEYSPAN_USA18X
- #include "keyspan_usa18x_fw.h"
-#else
- static const struct ezusb_hex_record *keyspan_usa18x_firmware = NULL;
-#endif
-
-#ifdef CONFIG_USB_SERIAL_KEYSPAN_USA19W
- #include "keyspan_usa19w_fw.h"
-#else
- static const struct ezusb_hex_record *keyspan_usa19w_firmware = NULL;
-#endif
-
-#ifdef CONFIG_USB_SERIAL_KEYSPAN_USA49W
- #include "keyspan_usa49w_fw.h"
-#else
- static const struct ezusb_hex_record *keyspan_usa49w_firmware = NULL;
-#endif
-
-#ifdef CONFIG_USB_SERIAL_KEYSPAN_USA49WLC
- #include "keyspan_usa49wlc_fw.h"
-#else
- static const struct ezusb_hex_record *keyspan_usa49wlc_firmware = NULL;
-#endif
+static int keyspan_usa67_send_setup (struct usb_serial *serial,
+ struct usb_serial_port *port,
+ int reset_port);
/* Values used for baud rate calculation - device specific */
#define KEYSPAN_INVALID_BAUD_RATE (-1)
#define keyspan_usa28_product_id 0x010f
#define keyspan_usa28x_product_id 0x0110
#define keyspan_usa28xa_product_id 0x0115
+#define keyspan_usa28xb_product_id 0x0110
+#define keyspan_usa28xg_product_id 0x0135
#define keyspan_usa49w_product_id 0x010a
#define keyspan_usa49wlc_product_id 0x012a
-
+#define keyspan_usa49wg_product_id 0x0131
struct keyspan_device_details {
/* product ID value */
int product_id;
- enum {msg_usa26, msg_usa28, msg_usa49, msg_usa90} msg_format;
+ enum {msg_usa26, msg_usa28, msg_usa49, msg_usa90, msg_usa67} msg_format;
/* Number of physical ports */
int num_ports;
/* Endpoint used for input status */
int instat_endpoint;
+ /* Endpoint used for input data 49WG only */
+ int indat_endpoint;
+
/* Endpoint used for global control functions */
int glocont_endpoint;
.inack_endpoints = {0x85},
.outcont_endpoints = {0x05},
.instat_endpoint = 0x87,
+ .indat_endpoint = -1,
.glocont_endpoint = 0x07,
.calculate_baud_rate = keyspan_usa19w_calc_baud,
.baudclk = KEYSPAN_USA18X_BAUDCLK,
.inack_endpoints = {0x83},
.outcont_endpoints = {0x03},
.instat_endpoint = 0x84,
+ .indat_endpoint = -1,
.glocont_endpoint = -1,
.calculate_baud_rate = keyspan_usa19_calc_baud,
.baudclk = KEYSPAN_USA19_BAUDCLK,
.inack_endpoints = {0x83},
.outcont_endpoints = {0x03},
.instat_endpoint = 0x84,
+ .indat_endpoint = -1,
.glocont_endpoint = -1,
.calculate_baud_rate = keyspan_usa28_calc_baud,
.baudclk = KEYSPAN_USA19_BAUDCLK,
.inack_endpoints = {0x83},
.outcont_endpoints = {0x03},
.instat_endpoint = 0x84,
+ .indat_endpoint = -1,
.glocont_endpoint = -1,
.calculate_baud_rate = keyspan_usa28_calc_baud,
.baudclk = KEYSPAN_USA19_BAUDCLK,
.inack_endpoints = {0x85},
.outcont_endpoints = {0x05},
.instat_endpoint = 0x87,
+ .indat_endpoint = -1,
.glocont_endpoint = 0x07,
.calculate_baud_rate = keyspan_usa19w_calc_baud,
.baudclk = KEYSPAN_USA19W_BAUDCLK,
.inack_endpoints = {0x85},
.outcont_endpoints = {0x05},
.instat_endpoint = 0x87,
+ .indat_endpoint = -1,
.glocont_endpoint = 0x07,
.calculate_baud_rate = keyspan_usa19w_calc_baud,
.baudclk = KEYSPAN_USA19W_BAUDCLK,
.inack_endpoints = {-1},
.outcont_endpoints = {0x02},
.instat_endpoint = 0x82,
+ .indat_endpoint = -1,
.glocont_endpoint = -1,
.calculate_baud_rate = keyspan_usa19hs_calc_baud,
.baudclk = KEYSPAN_USA19HS_BAUDCLK,
.inack_endpoints = {0x85, 0x86},
.outcont_endpoints = {0x05, 0x06},
.instat_endpoint = 0x87,
+ .indat_endpoint = -1,
.glocont_endpoint = 0x07,
.calculate_baud_rate = keyspan_usa28_calc_baud,
.baudclk = KEYSPAN_USA28_BAUDCLK,
.inack_endpoints = {0x85, 0x86},
.outcont_endpoints = {0x05, 0x06},
.instat_endpoint = 0x87,
+ .indat_endpoint = -1,
.glocont_endpoint = 0x07,
.calculate_baud_rate = keyspan_usa19w_calc_baud,
.baudclk = KEYSPAN_USA28X_BAUDCLK,
.inack_endpoints = {0x85, 0x86},
.outcont_endpoints = {0x05, 0x06},
.instat_endpoint = 0x87,
+ .indat_endpoint = -1,
.glocont_endpoint = 0x07,
.calculate_baud_rate = keyspan_usa19w_calc_baud,
.baudclk = KEYSPAN_USA28X_BAUDCLK,
};
+static const struct keyspan_device_details usa28xg_device_details = {
+ .product_id = keyspan_usa28xg_product_id,
+ .msg_format = msg_usa67,
+ .num_ports = 2,
+ .indat_endp_flip = 0,
+ .outdat_endp_flip = 0,
+ .indat_endpoints = {0x84, 0x88},
+ .outdat_endpoints = {0x02, 0x06},
+ .inack_endpoints = {-1, -1},
+ .outcont_endpoints = {-1, -1},
+ .instat_endpoint = 0x81,
+ .indat_endpoint = -1,
+ .glocont_endpoint = 0x01,
+ .calculate_baud_rate = keyspan_usa19w_calc_baud,
+ .baudclk = KEYSPAN_USA28X_BAUDCLK,
+};
/* We don't need a separate entry for the usa28xb as it appears as a 28x anyway */
static const struct keyspan_device_details usa49w_device_details = {
.inack_endpoints = {-1, -1, -1, -1},
.outcont_endpoints = {-1, -1, -1, -1},
.instat_endpoint = 0x87,
+ .indat_endpoint = -1,
.glocont_endpoint = 0x07,
.calculate_baud_rate = keyspan_usa19w_calc_baud,
.baudclk = KEYSPAN_USA49W_BAUDCLK,
.inack_endpoints = {-1, -1, -1, -1},
.outcont_endpoints = {-1, -1, -1, -1},
.instat_endpoint = 0x87,
+ .indat_endpoint = -1,
.glocont_endpoint = 0x07,
.calculate_baud_rate = keyspan_usa19w_calc_baud,
.baudclk = KEYSPAN_USA19W_BAUDCLK,
};
+static const struct keyspan_device_details usa49wg_device_details = {
+ .product_id = keyspan_usa49wg_product_id,
+ .msg_format = msg_usa49,
+ .num_ports = 4,
+ .indat_endp_flip = 0,
+ .outdat_endp_flip = 0,
+ .indat_endpoints = {-1, -1, -1, -1}, /* single 'global' data in EP */
+ .outdat_endpoints = {0x01, 0x02, 0x04, 0x06},
+ .inack_endpoints = {-1, -1, -1, -1},
+ .outcont_endpoints = {-1, -1, -1, -1},
+ .instat_endpoint = 0x81,
+ .indat_endpoint = 0x88,
+ .glocont_endpoint = 0x00, /* uses control EP */
+ .calculate_baud_rate = keyspan_usa19w_calc_baud,
+ .baudclk = KEYSPAN_USA19W_BAUDCLK,
+};
+
static const struct keyspan_device_details *keyspan_devices[] = {
&usa18x_device_details,
&usa19_device_details,
&usa28_device_details,
&usa28x_device_details,
&usa28xa_device_details,
+ &usa28xg_device_details,
/* 28xb not required as it renumerates as a 28x */
&usa49w_device_details,
&usa49wlc_device_details,
+ &usa49wg_device_details,
NULL,
};
{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28_product_id) },
{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28x_product_id) },
{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28xa_product_id) },
+ { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28xb_product_id) },
+ { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28xg_product_id) },
{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa49w_product_id)},
{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa49wlc_product_id)},
+ { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa49wg_product_id)},
{ } /* Terminating entry */
};
{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28_product_id) },
{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28x_product_id) },
{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28xa_product_id) },
+ { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28xb_product_id) },
+ { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28xg_product_id) },
{ } /* Terminating entry */
};
static struct usb_device_id keyspan_4port_ids[] = {
{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa49w_product_id) },
{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa49wlc_product_id)},
+ { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa49wg_product_id)},
{ } /* Terminating entry */
};
.name = "keyspan_no_firm",
},
.description = "Keyspan - (without firmware)",
- .usb_driver = &keyspan_driver,
.id_table = keyspan_pre_ids,
- .num_interrupt_in = NUM_DONT_CARE,
- .num_bulk_in = NUM_DONT_CARE,
- .num_bulk_out = NUM_DONT_CARE,
.num_ports = 1,
.attach = keyspan_fake_startup,
};
.name = "keyspan_1",
},
.description = "Keyspan 1 port adapter",
- .usb_driver = &keyspan_driver,
.id_table = keyspan_1port_ids,
- .num_interrupt_in = NUM_DONT_CARE,
- .num_bulk_in = NUM_DONT_CARE,
- .num_bulk_out = NUM_DONT_CARE,
.num_ports = 1,
.open = keyspan_open,
.close = keyspan_close,
.name = "keyspan_2",
},
.description = "Keyspan 2 port adapter",
- .usb_driver = &keyspan_driver,
.id_table = keyspan_2port_ids,
- .num_interrupt_in = NUM_DONT_CARE,
- .num_bulk_in = NUM_DONT_CARE,
- .num_bulk_out = NUM_DONT_CARE,
.num_ports = 2,
.open = keyspan_open,
.close = keyspan_close,
.name = "keyspan_4",
},
.description = "Keyspan 4 port adapter",
- .usb_driver = &keyspan_driver,
.id_table = keyspan_4port_ids,
- .num_interrupt_in = NUM_DONT_CARE,
- .num_bulk_in = 5,
- .num_bulk_out = 5,
.num_ports = 4,
.open = keyspan_open,
.close = keyspan_close,
projects / linux-2.6 / blobdiff