static __u16 vendor = FTDI_VID;
static __u16 product;
+struct ftdi_private {
+ ftdi_chip_type_t chip_type;
+ /* type of the device, either SIO or FT8U232AM */
+ int baud_base; /* baud base clock for divisor setting */
+ int custom_divisor; /* custom_divisor kludge, this is for baud_base (different from what goes to the chip!) */
+ __u16 last_set_data_urb_value ;
+ /* the last data state set - needed for doing a break */
+ int write_offset; /* This is the offset in the usb data block to write the serial data -
+ * it is different between devices
+ */
+ int flags; /* some ASYNC_xxxx flags are supported */
+ unsigned long last_dtr_rts; /* saved modem control outputs */
+ wait_queue_head_t delta_msr_wait; /* Used for TIOCMIWAIT */
+ char prev_status, diff_status; /* Used for TIOCMIWAIT */
+ __u8 rx_flags; /* receive state flags (throttling) */
+ spinlock_t rx_lock; /* spinlock for receive state */
+ struct delayed_work rx_work;
+ struct usb_serial_port *port;
+ int rx_processed;
+ unsigned long rx_bytes;
+
+ __u16 interface; /* FT2232C port interface (0 for FT232/245) */
+
+ int force_baud; /* if non-zero, force the baud rate to this value */
+ int force_rtscts; /* if non-zero, force RTS-CTS to always be enabled */
+
+ spinlock_t tx_lock; /* spinlock for transmit state */
+ unsigned long tx_bytes;
+ unsigned long tx_outstanding_bytes;
+ unsigned long tx_outstanding_urbs;
+};
+
/* struct ftdi_sio_quirk is used by devices requiring special attention. */
struct ftdi_sio_quirk {
int (*probe)(struct usb_serial *);
- void (*setup)(struct usb_serial *); /* Special settings during startup. */
+ void (*port_probe)(struct ftdi_private *); /* Special settings for probed ports. */
};
static int ftdi_olimex_probe (struct usb_serial *serial);
-static void ftdi_USB_UIRT_setup (struct usb_serial *serial);
-static void ftdi_HE_TIRA1_setup (struct usb_serial *serial);
+static void ftdi_USB_UIRT_setup (struct ftdi_private *priv);
+static void ftdi_HE_TIRA1_setup (struct ftdi_private *priv);
static struct ftdi_sio_quirk ftdi_olimex_quirk = {
.probe = ftdi_olimex_probe,
};
static struct ftdi_sio_quirk ftdi_USB_UIRT_quirk = {
- .setup = ftdi_USB_UIRT_setup,
+ .port_probe = ftdi_USB_UIRT_setup,
};
static struct ftdi_sio_quirk ftdi_HE_TIRA1_quirk = {
- .setup = ftdi_HE_TIRA1_setup,
+ .port_probe = ftdi_HE_TIRA1_setup,
};
/*
{ USB_DEVICE(FTDI_VID, FTDI_TERATRONIK_VCP_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_TERATRONIK_D2XX_PID) },
{ USB_DEVICE(EVOLUTION_VID, EVOLUTION_ER1_PID) },
+ { USB_DEVICE(EVOLUTION_VID, EVO_HYBRID_PID) },
+ { USB_DEVICE(EVOLUTION_VID, EVO_RCM4_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ARTEMIS_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ATIK_ATK16_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ATIK_ATK16C_PID) },
{ USB_DEVICE(ELEKTOR_VID, ELEKTOR_FT323R_PID) },
{ USB_DEVICE(TELLDUS_VID, TELLDUS_TELLSTICK_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_MAXSTREAM_PID) },
+ { USB_DEVICE(TML_VID, TML_USB_SERIAL_PID) },
{ USB_DEVICE(OLIMEX_VID, OLIMEX_ARM_USB_OCD_PID),
.driver_info = (kernel_ulong_t)&ftdi_olimex_quirk },
{ }, /* Optional parameter entry */
#define THROTTLED 0x01
#define ACTUALLY_THROTTLED 0x02
-struct ftdi_private {
- ftdi_chip_type_t chip_type;
- /* type of the device, either SIO or FT8U232AM */
- int baud_base; /* baud base clock for divisor setting */
- int custom_divisor; /* custom_divisor kludge, this is for baud_base (different from what goes to the chip!) */
- __u16 last_set_data_urb_value ;
- /* the last data state set - needed for doing a break */
- int write_offset; /* This is the offset in the usb data block to write the serial data -
- * it is different between devices
- */
- int flags; /* some ASYNC_xxxx flags are supported */
- unsigned long last_dtr_rts; /* saved modem control outputs */
- wait_queue_head_t delta_msr_wait; /* Used for TIOCMIWAIT */
- char prev_status, diff_status; /* Used for TIOCMIWAIT */
- __u8 rx_flags; /* receive state flags (throttling) */
- spinlock_t rx_lock; /* spinlock for receive state */
- struct delayed_work rx_work;
- struct usb_serial_port *port;
- int rx_processed;
- unsigned long rx_bytes;
-
- __u16 interface; /* FT2232C port interface (0 for FT232/245) */
-
- int force_baud; /* if non-zero, force the baud rate to this value */
- int force_rtscts; /* if non-zero, force RTS-CTS to always be enabled */
-
- spinlock_t tx_lock; /* spinlock for transmit state */
- unsigned long tx_bytes;
- unsigned long tx_outstanding_bytes;
- unsigned long tx_outstanding_urbs;
-};
-
/* Used for TIOCMIWAIT */
#define FTDI_STATUS_B0_MASK (FTDI_RS0_CTS | FTDI_RS0_DSR | FTDI_RS0_RI | FTDI_RS0_RLSD)
#define FTDI_STATUS_B1_MASK (FTDI_RS_BI)
/* function prototypes for a FTDI serial converter */
static int ftdi_sio_probe (struct usb_serial *serial, const struct usb_device_id *id);
-static int ftdi_sio_attach (struct usb_serial *serial);
static void ftdi_shutdown (struct usb_serial *serial);
static int ftdi_sio_port_probe (struct usb_serial_port *port);
static int ftdi_sio_port_remove (struct usb_serial_port *port);
.ioctl = ftdi_ioctl,
.set_termios = ftdi_set_termios,
.break_ctl = ftdi_break_ctl,
- .attach = ftdi_sio_attach,
.shutdown = ftdi_shutdown,
};
/* XXX see create_sysfs_attrs */
if (priv->chip_type != SIO) {
device_remove_file(&port->dev, &dev_attr_event_char);
- if (priv->chip_type == FT232BM || priv->chip_type == FT2232C) {
+ if (priv->chip_type == FT232BM ||
+ priv->chip_type == FT2232C ||
+ priv->chip_type == FT232RL) {
device_remove_file(&port->dev, &dev_attr_latency_timer);
}
}
static int ftdi_sio_port_probe(struct usb_serial_port *port)
{
struct ftdi_private *priv;
+ struct ftdi_sio_quirk *quirk = usb_get_serial_data(port->serial);
+
dbg("%s",__FUNCTION__);
than queue a task to deliver them */
priv->flags = ASYNC_LOW_LATENCY;
+ if (quirk && quirk->port_probe)
+ quirk->port_probe(priv);
+
/* Increase the size of read buffers */
kfree(port->bulk_in_buffer);
port->bulk_in_buffer = kmalloc (BUFSZ, GFP_KERNEL);
return 0;
}
-/* attach subroutine */
-static int ftdi_sio_attach (struct usb_serial *serial)
-{
- /* Check for device requiring special set up. */
- struct ftdi_sio_quirk *quirk = usb_get_serial_data(serial);
-
- if (quirk && quirk->setup)
- quirk->setup(serial);
-
- return 0;
-} /* ftdi_sio_attach */
-
-
/* Setup for the USB-UIRT device, which requires hardwired
* baudrate (38400 gets mapped to 312500) */
/* Called from usbserial:serial_probe */
-static void ftdi_USB_UIRT_setup (struct usb_serial *serial)
+static void ftdi_USB_UIRT_setup (struct ftdi_private *priv)
{
- struct ftdi_private *priv;
-
dbg("%s",__FUNCTION__);
- priv = usb_get_serial_port_data(serial->port[0]);
priv->flags |= ASYNC_SPD_CUST;
priv->custom_divisor = 77;
priv->force_baud = B38400;
/* Setup for the HE-TIRA1 device, which requires hardwired
* baudrate (38400 gets mapped to 100000) and RTS-CTS enabled. */
-static void ftdi_HE_TIRA1_setup (struct usb_serial *serial)
+static void ftdi_HE_TIRA1_setup (struct ftdi_private *priv)
{
- struct ftdi_private *priv;
-
dbg("%s",__FUNCTION__);
- priv = usb_get_serial_port_data(serial->port[0]);
priv->flags |= ASYNC_SPD_CUST;
priv->custom_divisor = 240;
priv->force_baud = B38400;
case FT8U232AM:
case FT232BM:
case FT2232C:
+ case FT232RL:
/* the 8U232AM returns a two byte value (the sio is a 1 byte value) - in the same
format as the data returned from the in point */
if ((ret = usb_control_msg(port->serial->dev,
projects / linux-2.6 / blobdiff