},
.id_table = id_table,
.usb_driver = &empeg_driver,
- .num_interrupt_in = 0,
- .num_bulk_in = 1,
- .num_bulk_out = 1,
.num_ports = 1,
.open = empeg_open,
.close = empeg_close,
struct usb_serial *serial = port->serial;
int result = 0;
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
/* Force default termio settings */
empeg_set_termios (port, NULL) ;
result = usb_submit_urb(port->read_urb, GFP_KERNEL);
if (result)
- dev_err(&port->dev, "%s - failed submitting read urb, error %d\n", __FUNCTION__, result);
+ dev_err(&port->dev, "%s - failed submitting read urb, error %d\n", __func__, result);
return result;
}
static void empeg_close (struct usb_serial_port *port, struct file * filp)
{
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
/* shutdown our bulk read */
usb_kill_urb(port->read_urb);
int bytes_sent = 0;
int transfer_size;
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
while (count > 0) {
spin_unlock_irqrestore (&write_urb_pool_lock, flags);
if (urb == NULL) {
- dbg("%s - no more free urbs", __FUNCTION__);
+ dbg("%s - no more free urbs", __func__);
goto exit;
}
if (urb->transfer_buffer == NULL) {
urb->transfer_buffer = kmalloc (URB_TRANSFER_BUFFER_SIZE, GFP_ATOMIC);
if (urb->transfer_buffer == NULL) {
- dev_err(&port->dev, "%s no more kernel memory...\n", __FUNCTION__);
+ dev_err(&port->dev, "%s no more kernel memory...\n", __func__);
goto exit;
}
}
memcpy (urb->transfer_buffer, current_position, transfer_size);
- usb_serial_debug_data(debug, &port->dev, __FUNCTION__, transfer_size, urb->transfer_buffer);
+ usb_serial_debug_data(debug, &port->dev, __func__, transfer_size, urb->transfer_buffer);
/* build up our urb */
usb_fill_bulk_urb (
/* send it down the pipe */
status = usb_submit_urb(urb, GFP_ATOMIC);
if (status) {
- dev_err(&port->dev, "%s - usb_submit_urb(write bulk) failed with status = %d\n", __FUNCTION__, status);
+ dev_err(&port->dev, "%s - usb_submit_urb(write bulk) failed with status = %d\n", __func__, status);
bytes_sent = status;
break;
}
int i;
int room = 0;
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
spin_lock_irqsave (&write_urb_pool_lock, flags);
spin_unlock_irqrestore (&write_urb_pool_lock, flags);
- dbg("%s - returns %d", __FUNCTION__, room);
+ dbg("%s - returns %d", __func__, room);
return (room);
int i;
int chars = 0;
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
spin_lock_irqsave (&write_urb_pool_lock, flags);
spin_unlock_irqrestore (&write_urb_pool_lock, flags);
- dbg("%s - returns %d", __FUNCTION__, chars);
+ dbg("%s - returns %d", __func__, chars);
return (chars);
struct usb_serial_port *port = urb->context;
int status = urb->status;
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
if (status) {
dbg("%s - nonzero write bulk status received: %d",
- __FUNCTION__, status);
+ __func__, status);
return;
}
static void empeg_read_bulk_callback (struct urb *urb)
{
- struct usb_serial_port *port = (struct usb_serial_port *)urb->context;
+ struct usb_serial_port *port = urb->context;
struct tty_struct *tty;
unsigned char *data = urb->transfer_buffer;
int result;
int status = urb->status;
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
if (status) {
dbg("%s - nonzero read bulk status received: %d",
- __FUNCTION__, status);
+ __func__, status);
return;
}
- usb_serial_debug_data(debug, &port->dev, __FUNCTION__, urb->actual_length, data);
+ usb_serial_debug_data(debug, &port->dev, __func__, urb->actual_length, data);
tty = port->tty;
result = usb_submit_urb(port->read_urb, GFP_ATOMIC);
if (result)
- dev_err(&urb->dev->dev, "%s - failed resubmitting read urb, error %d\n", __FUNCTION__, result);
+ dev_err(&urb->dev->dev, "%s - failed resubmitting read urb, error %d\n", __func__, result);
return;
static void empeg_throttle (struct usb_serial_port *port)
{
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
usb_kill_urb(port->read_urb);
}
{
int result;
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
port->read_urb->dev = port->serial->dev;
result = usb_submit_urb(port->read_urb, GFP_ATOMIC);
if (result)
- dev_err(&port->dev, "%s - failed submitting read urb, error %d\n", __FUNCTION__, result);
+ dev_err(&port->dev, "%s - failed submitting read urb, error %d\n", __func__, result);
return;
}
{
int r;
- dbg("%s", __FUNCTION__);
+ dbg("%s", __func__);
if (serial->dev->actconfig->desc.bConfigurationValue != 1) {
err("active config #%d != 1 ??",
serial->dev->actconfig->desc.bConfigurationValue);
return -ENODEV;
}
- dbg("%s - reset config", __FUNCTION__);
+ dbg("%s - reset config", __func__);
r = usb_reset_configuration (serial->dev);
/* continue on with initialization */
static void empeg_shutdown (struct usb_serial *serial)
{
- dbg ("%s", __FUNCTION__);
+ dbg ("%s", __func__);
}
static int empeg_ioctl (struct usb_serial_port *port, struct file * file, unsigned int cmd, unsigned long arg)
{
- dbg("%s - port %d, cmd 0x%.4x", __FUNCTION__, port->number, cmd);
+ dbg("%s - port %d, cmd 0x%.4x", __func__, port->number, cmd);
return -ENOIOCTLCMD;
}
static void empeg_set_termios (struct usb_serial_port *port, struct ktermios *old_termios)
{
-
- dbg("%s - port %d", __FUNCTION__, port->number);
-
- if ((!port->tty) || (!port->tty->termios)) {
- dbg("%s - no tty structures", __FUNCTION__);
- return;
- }
+ struct ktermios *termios = port->tty->termios;
+ dbg("%s - port %d", __func__, port->number);
/*
* The empeg-car player wants these particular tty settings.
*
* The default requirements for this device are:
*/
- port->tty->termios->c_iflag
+ termios->c_iflag
&= ~(IGNBRK /* disable ignore break */
| BRKINT /* disable break causes interrupt */
| PARMRK /* disable mark parity errors */
| ICRNL /* disable translate CR to NL */
| IXON); /* disable enable XON/XOFF flow control */
- port->tty->termios->c_oflag
+ termios->c_oflag
&= ~OPOST; /* disable postprocess output characters */
- port->tty->termios->c_lflag
+ termios->c_lflag
&= ~(ECHO /* disable echo input characters */
| ECHONL /* disable echo new line */
| ICANON /* disable erase, kill, werase, and rprnt special characters */
| ISIG /* disable interrupt, quit, and suspend special characters */
| IEXTEN); /* disable non-POSIX special characters */
- port->tty->termios->c_cflag
+ termios->c_cflag
&= ~(CSIZE /* no size */
| PARENB /* disable parity bit */
| CBAUD); /* clear current baud rate */
- port->tty->termios->c_cflag
- |= (CS8 /* character size 8 bits */
- | B115200); /* baud rate 115200 */
+ termios->c_cflag
+ |= CS8; /* character size 8 bits */
/*
* Force low_latency on; otherwise the pushes are scheduled;
* on the floor. We don't want to drop bytes on the floor. :)
*/
port->tty->low_latency = 1;
-
- return;
+ tty_encode_baud_rate(port->tty, 115200, 115200);
}
urb->transfer_buffer = kmalloc (URB_TRANSFER_BUFFER_SIZE, GFP_KERNEL);
if (!urb->transfer_buffer) {
err("%s - out of memory for urb buffers.",
- __FUNCTION__);
+ __func__);
continue;
}
}
projects / linux-2.6 / blobdiff