# USB Serial device configuration
#
-menu "USB Serial Converter support"
- depends on USB!=n
-
-config USB_SERIAL
+menuconfig USB_SERIAL
tristate "USB Serial Converter support"
depends on USB
---help---
To compile this driver as a module, choose M here: the
module will be called usbserial.
+if USB_SERIAL
+
config USB_SERIAL_CONSOLE
- bool "USB Serial Console device support (EXPERIMENTAL)"
- depends on USB_SERIAL=y && EXPERIMENTAL
+ bool "USB Serial Console device support"
+ depends on USB_SERIAL=y
---help---
If you say Y here, it will be possible to use a USB to serial
converter port as the system console (the system console is the
If unsure, say N.
+config USB_EZUSB
+ bool "Functions for loading firmware on EZUSB chips"
+ depends on USB_SERIAL
+ help
+ Say Y here if you need EZUSB device support.
+
config USB_SERIAL_GENERIC
bool "USB Generic Serial Driver"
depends on USB_SERIAL
properly.
config USB_SERIAL_AIRCABLE
- tristate "USB AIRcable Bluetooth Dongle Driver (EXPERIMENTAL)"
- depends on USB_SERIAL && EXPERIMENTAL
+ tristate "USB AIRcable Bluetooth Dongle Driver"
+ depends on USB_SERIAL
help
Say Y here if you want to use USB AIRcable Bluetooth Dongle.
module will be called airprime.
config USB_SERIAL_ARK3116
- tristate "USB ARK Micro 3116 USB Serial Driver (EXPERIMENTAL)"
- depends on USB_SERIAL && EXPERIMENTAL
+ tristate "USB ARK Micro 3116 USB Serial Driver"
+ depends on USB_SERIAL
help
Say Y here if you want to use a ARK Micro 3116 USB to Serial
device.
To compile this driver as a module, choose M here: the
module will be called belkin_sa.
+config USB_SERIAL_CH341
+ tristate "USB Winchiphead CH341 Single Port Serial Driver"
+ depends on USB_SERIAL
+ help
+ Say Y here if you want to use a Winchiphead CH341 single port
+ USB to serial adapter.
+
+ To compile this driver as a module, choose M here: the
+ module will be called ch341.
+
config USB_SERIAL_WHITEHEAT
tristate "USB ConnectTech WhiteHEAT Serial Driver"
depends on USB_SERIAL
+ select USB_EZUSB
help
Say Y here if you want to use a ConnectTech WhiteHEAT 4 port
USB to serial converter device.
config USB_SERIAL_CP2101
tristate "USB CP2101 UART Bridge Controller"
- depends on USB_SERIAL && EXPERIMENTAL
+ depends on USB_SERIAL
help
Say Y here if you want to use a CP2101/CP2102 based USB to RS232
converter.
config USB_SERIAL_CYPRESS_M8
tristate "USB Cypress M8 USB Serial Driver"
- depends on USB_SERIAL && EXPERIMENTAL
+ depends on USB_SERIAL
help
Say Y here if you want to use a device that contains the Cypress
USB to Serial microcontroller, such as the DeLorme Earthmate GPS.
module will be called empeg.
config USB_SERIAL_FTDI_SIO
- tristate "USB FTDI Single Port Serial Driver (EXPERIMENTAL)"
- depends on USB_SERIAL && EXPERIMENTAL
+ tristate "USB FTDI Single Port Serial Driver"
+ depends on USB_SERIAL
---help---
Say Y here if you want to use a FTDI SIO single port USB to serial
converter device. The implementation I have is called the USC-1000.
module will be called ipaq.
config USB_SERIAL_IR
- tristate "USB IR Dongle Serial Driver (EXPERIMENTAL)"
- depends on USB_SERIAL && EXPERIMENTAL
+ tristate "USB IR Dongle Serial Driver"
+ depends on USB_SERIAL
help
Say Y here if you want to enable simple serial support for USB IrDA
devices. This is useful if you do not want to use the full IrDA
module will be called garmin_gps.
config USB_SERIAL_IPW
- tristate "USB IPWireless (3G UMTS TDD) Driver (EXPERIMENTAL)"
- depends on USB_SERIAL && EXPERIMENTAL
+ tristate "USB IPWireless (3G UMTS TDD) Driver"
+ depends on USB_SERIAL
help
Say Y here if you want to use a IPWireless USB modem such as
the ones supplied by Axity3G/Sentech South Africa.
To compile this driver as a module, choose M here: the
module will be called ipw.
+config USB_SERIAL_IUU
+ tristate "USB Infinity USB Unlimited Phoenix Driver"
+ depends on USB_SERIAL
+ help
+ Say Y here if you want to use a IUU in phoenix mode and get
+ an extra ttyUSBx device. More information available on
+ http://eczema.ecze.com/iuu_phoenix.html
+
+ To compile this driver as a module, choose M here: the
+ module will be called iuu_phoenix.o
+
config USB_SERIAL_KEYSPAN_PDA
tristate "USB Keyspan PDA Single Port Serial Driver"
depends on USB_SERIAL
+ select USB_EZUSB
help
Say Y here if you want to use a Keyspan PDA single port USB to
serial converter device. This driver makes use of firmware
config USB_SERIAL_KEYSPAN
tristate "USB Keyspan USA-xxx Serial Driver"
depends on USB_SERIAL
+ select USB_EZUSB
---help---
Say Y here if you want to use Keyspan USB to serial converter
devices. This driver makes use of Keyspan's official firmware
Say Y here to include firmware for the USA-49WLC converter.
config USB_SERIAL_KLSI
- tristate "USB KL5KUSB105 (Palmconnect) Driver (EXPERIMENTAL)"
- depends on USB_SERIAL && EXPERIMENTAL
+ tristate "USB KL5KUSB105 (Palmconnect) Driver"
+ depends on USB_SERIAL
---help---
Say Y here if you want to use a KL5KUSB105 - based single port
serial adapter. The most widely known -- and currently the only
To compile this driver as a module, choose M here: the
module will be called pl2303.
+config USB_SERIAL_OTI6858
+ tristate "USB Ours Technology Inc. OTi-6858 USB To RS232 Bridge Controller"
+ depends on USB_SERIAL
+ help
+ Say Y here if you want to use the OTi-6858 single port USB to serial
+ converter device.
+
+ To compile this driver as a module, choose M here: the
+ module will be called oti6858.
+
config USB_SERIAL_HP4X
tristate "USB HP4x Calculators support"
depends on USB_SERIAL
module will be called hp4x.
config USB_SERIAL_SAFE
- tristate "USB Safe Serial (Encapsulated) Driver (EXPERIMENTAL)"
- depends on USB_SERIAL && EXPERIMENTAL
+ tristate "USB Safe Serial (Encapsulated) Driver"
+ depends on USB_SERIAL
config USB_SERIAL_SAFE_PADDED
bool "USB Secure Encapsulated Driver - Padded"
module will be called ti_usb_3410_5052.
config USB_SERIAL_CYBERJACK
- tristate "USB REINER SCT cyberJack pinpad/e-com chipcard reader (EXPERIMENTAL)"
- depends on USB_SERIAL && EXPERIMENTAL
+ tristate "USB REINER SCT cyberJack pinpad/e-com chipcard reader"
+ depends on USB_SERIAL
---help---
Say Y here if you want to use a cyberJack pinpad/e-com USB chipcard
- reader. This is an interface to ISO 7816 compatible contactbased
+ reader. This is an interface to ISO 7816 compatible contact-based
chipcards, e.g. GSM SIMs.
To compile this driver as a module, choose M here: the
config USB_SERIAL_XIRCOM
tristate "USB Xircom / Entregra Single Port Serial Driver"
depends on USB_SERIAL
+ select USB_EZUSB
help
Say Y here if you want to use a Xircom or Entregra single port USB to
serial converter device. This driver makes use of firmware
it might be accessible via the FTDI_SIO driver.
config USB_SERIAL_OMNINET
- tristate "USB ZyXEL omni.net LCD Plus Driver (EXPERIMENTAL)"
- depends on USB_SERIAL && EXPERIMENTAL
+ tristate "USB ZyXEL omni.net LCD Plus Driver"
+ depends on USB_SERIAL
help
Say Y here if you want to use a ZyXEL omni.net LCD ISDN TA.
To compile this driver as a module, choose M here: the
module will be called usb-debug.
-config USB_EZUSB
- bool
- depends on USB_SERIAL_KEYSPAN_PDA || USB_SERIAL_XIRCOM || USB_SERIAL_KEYSPAN || USB_SERIAL_WHITEHEAT
- default y
-
-
-endmenu
-
+endif # USB_SERIAL