config USB_EZUSB
bool "Functions for loading firmware on EZUSB chips"
- depends on USB_SERIAL
help
Say Y here if you need EZUSB device support.
config USB_SERIAL_GENERIC
bool "USB Generic Serial Driver"
- depends on USB_SERIAL
help
Say Y here if you want to use the generic USB serial driver. Please
read <file:Documentation/usb/usb-serial.txt> for more information on
config USB_SERIAL_AIRCABLE
tristate "USB AIRcable Bluetooth Dongle Driver"
- depends on USB_SERIAL
help
Say Y here if you want to use USB AIRcable Bluetooth Dongle.
config USB_SERIAL_AIRPRIME
tristate "USB AirPrime CDMA Wireless Driver"
- depends on USB_SERIAL
help
Say Y here if you want to use a AirPrime CDMA Wireless PC card.
config USB_SERIAL_ARK3116
tristate "USB ARK Micro 3116 USB Serial Driver"
- depends on USB_SERIAL
help
Say Y here if you want to use a ARK Micro 3116 USB to Serial
device.
config USB_SERIAL_BELKIN
tristate "USB Belkin and Peracom Single Port Serial Driver"
- depends on USB_SERIAL
help
Say Y here if you want to use a Belkin USB Serial single port
adaptor (F5U103 is one of the model numbers) or the Peracom single
config USB_SERIAL_CH341
tristate "USB Winchiphead CH341 Single Port Serial Driver"
- depends on USB_SERIAL
help
Say Y here if you want to use a Winchiphead CH341 single port
USB to serial adapter.
config USB_SERIAL_WHITEHEAT
tristate "USB ConnectTech WhiteHEAT Serial Driver"
- depends on USB_SERIAL
select USB_EZUSB
help
Say Y here if you want to use a ConnectTech WhiteHEAT 4 port
config USB_SERIAL_DIGI_ACCELEPORT
tristate "USB Digi International AccelePort USB Serial Driver"
- depends on USB_SERIAL
---help---
Say Y here if you want to use Digi AccelePort USB 2 or 4 devices,
2 port (plus parallel port) and 4 port USB serial converters. The
config USB_SERIAL_CP2101
tristate "USB CP2101 UART Bridge Controller"
- depends on USB_SERIAL
help
Say Y here if you want to use a CP2101/CP2102 based USB to RS232
converter.
config USB_SERIAL_CYPRESS_M8
tristate "USB Cypress M8 USB Serial Driver"
- depends on USB_SERIAL
help
Say Y here if you want to use a device that contains the Cypress
USB to Serial microcontroller, such as the DeLorme Earthmate GPS.
config USB_SERIAL_EMPEG
tristate "USB Empeg empeg-car Mark I/II Driver"
- depends on USB_SERIAL
help
Say Y here if you want to connect to your Empeg empeg-car Mark I/II
mp3 player via USB. The driver uses a single ttyUSB{0,1,2,...}
config USB_SERIAL_FTDI_SIO
tristate "USB FTDI Single Port Serial Driver"
- depends on USB_SERIAL
---help---
Say Y here if you want to use a FTDI SIO single port USB to serial
converter device. The implementation I have is called the USC-1000.
config USB_SERIAL_FUNSOFT
tristate "USB Fundamental Software Dongle Driver"
- depends on USB_SERIAL
---help---
Say Y here if you want to use the Fundamental Software dongle.
config USB_SERIAL_VISOR
tristate "USB Handspring Visor / Palm m50x / Sony Clie Driver"
- depends on USB_SERIAL
help
Say Y here if you want to connect to your HandSpring Visor, Palm
m500 or m505 through its USB docking station. See
config USB_SERIAL_IPAQ
tristate "USB PocketPC PDA Driver"
- depends on USB_SERIAL
help
Say Y here if you want to connect to your Compaq iPAQ, HP Jornada
or any other PDA running Windows CE 3.0 or PocketPC 2002
config USB_SERIAL_IR
tristate "USB IR Dongle Serial Driver"
- depends on USB_SERIAL
help
Say Y here if you want to enable simple serial support for USB IrDA
devices. This is useful if you do not want to use the full IrDA
config USB_SERIAL_EDGEPORT
tristate "USB Inside Out Edgeport Serial Driver"
- depends on USB_SERIAL
---help---
Say Y here if you want to use any of the following devices from
Inside Out Networks (Digi):
config USB_SERIAL_EDGEPORT_TI
tristate "USB Inside Out Edgeport Serial Driver (TI devices)"
- depends on USB_SERIAL
help
Say Y here if you want to use any of the devices from Inside Out
Networks (Digi) that are not supported by the io_edgeport driver.
config USB_SERIAL_GARMIN
tristate "USB Garmin GPS driver"
- depends on USB_SERIAL
help
Say Y here if you want to connect to your Garmin GPS.
Should work with most Garmin GPS devices which have a native USB port.
config USB_SERIAL_IPW
tristate "USB IPWireless (3G UMTS TDD) Driver"
- depends on USB_SERIAL
help
Say Y here if you want to use a IPWireless USB modem such as
the ones supplied by Axity3G/Sentech South Africa.
config USB_SERIAL_IUU
tristate "USB Infinity USB Unlimited Phoenix Driver"
- depends on USB_SERIAL
help
Say Y here if you want to use a IUU in phoenix mode and get
an extra ttyUSBx device. More information available on
config USB_SERIAL_KEYSPAN_PDA
tristate "USB Keyspan PDA Single Port Serial Driver"
- depends on USB_SERIAL
select USB_EZUSB
help
Say Y here if you want to use a Keyspan PDA single port USB to
config USB_SERIAL_KEYSPAN
tristate "USB Keyspan USA-xxx Serial Driver"
- depends on USB_SERIAL
select USB_EZUSB
---help---
Say Y here if you want to use Keyspan USB to serial converter
config USB_SERIAL_KEYSPAN_MPR
bool "USB Keyspan MPR Firmware"
- depends on USB_SERIAL_KEYSPAN
+ depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
help
Say Y here to include firmware for the Keyspan MPR converter.
config USB_SERIAL_KEYSPAN_USA28
bool "USB Keyspan USA-28 Firmware"
- depends on USB_SERIAL_KEYSPAN
+ depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
help
Say Y here to include firmware for the USA-28 converter.
config USB_SERIAL_KEYSPAN_USA28X
bool "USB Keyspan USA-28X Firmware"
- depends on USB_SERIAL_KEYSPAN
+ depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
help
Say Y here to include firmware for the USA-28X converter.
Be sure you have a USA-28X, there are also 28XA and 28XB
config USB_SERIAL_KEYSPAN_USA28XA
bool "USB Keyspan USA-28XA Firmware"
- depends on USB_SERIAL_KEYSPAN
+ depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
help
Say Y here to include firmware for the USA-28XA converter.
Be sure you have a USA-28XA, there are also 28X and 28XB
config USB_SERIAL_KEYSPAN_USA28XB
bool "USB Keyspan USA-28XB Firmware"
- depends on USB_SERIAL_KEYSPAN
+ depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
help
Say Y here to include firmware for the USA-28XB converter.
Be sure you have a USA-28XB, there are also 28X and 28XA
config USB_SERIAL_KEYSPAN_USA19
bool "USB Keyspan USA-19 Firmware"
- depends on USB_SERIAL_KEYSPAN
+ depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
help
Say Y here to include firmware for the USA-19 converter.
config USB_SERIAL_KEYSPAN_USA18X
bool "USB Keyspan USA-18X Firmware"
- depends on USB_SERIAL_KEYSPAN
+ depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
help
Say Y here to include firmware for the USA-18X converter.
config USB_SERIAL_KEYSPAN_USA19W
bool "USB Keyspan USA-19W Firmware"
- depends on USB_SERIAL_KEYSPAN
+ depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
help
Say Y here to include firmware for the USA-19W converter.
config USB_SERIAL_KEYSPAN_USA19QW
bool "USB Keyspan USA-19QW Firmware"
- depends on USB_SERIAL_KEYSPAN
+ depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
help
Say Y here to include firmware for the USA-19QW converter.
config USB_SERIAL_KEYSPAN_USA19QI
bool "USB Keyspan USA-19QI Firmware"
- depends on USB_SERIAL_KEYSPAN
+ depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
help
Say Y here to include firmware for the USA-19QI converter.
config USB_SERIAL_KEYSPAN_USA49W
bool "USB Keyspan USA-49W Firmware"
- depends on USB_SERIAL_KEYSPAN
+ depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
help
Say Y here to include firmware for the USA-49W converter.
config USB_SERIAL_KEYSPAN_USA49WLC
bool "USB Keyspan USA-49WLC Firmware"
- depends on USB_SERIAL_KEYSPAN
+ depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
help
Say Y here to include firmware for the USA-49WLC converter.
config USB_SERIAL_KLSI
tristate "USB KL5KUSB105 (Palmconnect) Driver"
- depends on USB_SERIAL
---help---
Say Y here if you want to use a KL5KUSB105 - based single port
serial adapter. The most widely known -- and currently the only
config USB_SERIAL_KOBIL_SCT
tristate "USB KOBIL chipcard reader"
- depends on USB_SERIAL
---help---
Say Y here if you want to use one of the following KOBIL USB chipcard
readers:
config USB_SERIAL_MCT_U232
tristate "USB MCT Single Port Serial Driver"
- depends on USB_SERIAL
---help---
Say Y here if you want to use a USB Serial single port adapter from
Magic Control Technology Corp. (U232 is one of the model numbers).
config USB_SERIAL_MOS7720
tristate "USB Moschip 7720 Serial Driver"
- depends on USB_SERIAL
---help---
Say Y here if you want to use USB Serial single and double
port adapters from Moschip Semiconductor Tech.
config USB_SERIAL_MOS7840
tristate "USB Moschip 7840/7820 USB Serial Driver"
- depends on USB_SERIAL
---help---
Say Y here if you want to use a MCS7840 Quad-Serial or MCS7820
Dual-Serial port device from MosChip Semiconductor.
To compile this driver as a module, choose M here: the
module will be called mos7840. If unsure, choose N.
+config USB_SERIAL_MOTOROLA
+ tristate "USB Motorola Phone modem driver"
+ ---help---
+ Say Y here if you want to use a Motorola phone with a USB
+ connector as a modem link.
+
+ To compile this driver as a module, choose M here: the
+ module will be called moto_modem. If unsure, choose N.
+
config USB_SERIAL_NAVMAN
tristate "USB Navman GPS device"
- depends on USB_SERIAL
help
To compile this driver as a module, choose M here: the
module will be called navman.
config USB_SERIAL_PL2303
tristate "USB Prolific 2303 Single Port Serial Driver"
- depends on USB_SERIAL
help
Say Y here if you want to use the PL2303 USB Serial single port
adapter from Prolific.
config USB_SERIAL_OTI6858
tristate "USB Ours Technology Inc. OTi-6858 USB To RS232 Bridge Controller"
- depends on USB_SERIAL
help
Say Y here if you want to use the OTi-6858 single port USB to serial
converter device.
To compile this driver as a module, choose M here: the
module will be called oti6858.
+config USB_SERIAL_SPCP8X5
+ tristate "USB SPCP8x5 USB To Serial Driver"
+ help
+ Say Y here if you want to use the spcp8x5 converter chip. This is
+ commonly found in some Z-Wave USB devices.
+
+ To compile this driver as a module, choose M here: the
+ module will be called spcp8x5.
+
config USB_SERIAL_HP4X
tristate "USB HP4x Calculators support"
- depends on USB_SERIAL
help
Say Y here if you want to use an Hewlett-Packard 4x Calculator.
config USB_SERIAL_SAFE
tristate "USB Safe Serial (Encapsulated) Driver"
- depends on USB_SERIAL
config USB_SERIAL_SAFE_PADDED
bool "USB Secure Encapsulated Driver - Padded"
config USB_SERIAL_SIERRAWIRELESS
tristate "USB Sierra Wireless Driver"
- depends on USB_SERIAL
help
Say M here if you want to use a Sierra Wireless device (if
using an PC 5220 or AC580 please use the Airprime driver
config USB_SERIAL_TI
tristate "USB TI 3410/5052 Serial Driver"
- depends on USB_SERIAL
help
Say Y here if you want to use the TI USB 3410 or 5052
serial devices.
config USB_SERIAL_CYBERJACK
tristate "USB REINER SCT cyberJack pinpad/e-com chipcard reader"
- depends on USB_SERIAL
---help---
Say Y here if you want to use a cyberJack pinpad/e-com USB chipcard
reader. This is an interface to ISO 7816 compatible contact-based
config USB_SERIAL_XIRCOM
tristate "USB Xircom / Entregra Single Port Serial Driver"
- depends on USB_SERIAL
select USB_EZUSB
help
Say Y here if you want to use a Xircom or Entregra single port USB to
config USB_SERIAL_OPTION
tristate "USB driver for GSM and CDMA modems"
- depends on USB_SERIAL
help
Say Y here if you have a GSM or CDMA modem that's connected to USB.
config USB_SERIAL_OMNINET
tristate "USB ZyXEL omni.net LCD Plus Driver"
- depends on USB_SERIAL
help
Say Y here if you want to use a ZyXEL omni.net LCD ISDN TA.
config USB_SERIAL_DEBUG
tristate "USB Debugging Device"
- depends on USB_SERIAL
help
Say Y here if you have a USB debugging device used to receive
debugging data from another machine. The most common of these
projects / linux-2.6 / blobdiff