/*
* Emagic EMI 2|6 usb audio interface firmware loader.
* Copyright (C) 2002
- * Tapio Laxström (tapio.laxstrom@iptime.fi)
+ * Tapio Laxström (tapio.laxstrom@iptime.fi)
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License, as published by
#include <linux/module.h>
#include <linux/usb.h>
#include <linux/delay.h>
-
-#define MAX_INTEL_HEX_RECORD_LENGTH 16
-typedef struct _INTEL_HEX_RECORD
-{
- __u32 length;
- __u32 address;
- __u32 type;
- __u8 data[MAX_INTEL_HEX_RECORD_LENGTH];
-} INTEL_HEX_RECORD, *PINTEL_HEX_RECORD;
+#include <linux/firmware.h>
+#include <linux/ihex.h>
/* include firmware (variables)*/
//#undef SPDIF /* if you want MIDI uncomment this line */
#ifdef SPDIF
-# include "emi62_fw_s.h" /* spdif fw */
+#define FIRMWARE_FW "emi62/spdif.fw"
#else
-# include "emi62_fw_m.h" /* midi fw */
+#define FIRMWARE_FW "emi62/midi.fw"
#endif
#define EMI62_VENDOR_ID 0x086a /* Emagic Soft-und Hardware GmBH */
#define CPUCS_REG 0x7F92 /* EZ-USB Control and Status Register. Bit 0 controls 8051 reset */
#define INTERNAL_RAM(address) (address <= MAX_INTERNAL_ADDRESS)
-static int emi62_writememory( struct usb_device *dev, int address, unsigned char *data, int length, __u8 bRequest);
+static int emi62_writememory(struct usb_device *dev, int address,
+ const unsigned char *data, int length,
+ __u8 bRequest);
static int emi62_set_reset(struct usb_device *dev, unsigned char reset_bit);
static int emi62_load_firmware (struct usb_device *dev);
static int emi62_probe(struct usb_interface *intf, const struct usb_device_id *id);
/* thanks to drivers/usb/serial/keyspan_pda.c code */
-static int emi62_writememory (struct usb_device *dev, int address, unsigned char *data, int length, __u8 request)
+static int emi62_writememory(struct usb_device *dev, int address,
+ const unsigned char *data, int length,
+ __u8 request)
{
int result;
- unsigned char *buffer = kmalloc (length, GFP_KERNEL);
+ unsigned char *buffer = kmemdup(data, length, GFP_KERNEL);
if (!buffer) {
err("emi62: kmalloc(%d) failed.", length);
return -ENOMEM;
}
- memcpy (buffer, data, length);
/* Note: usb_control_msg returns negative value on error or length of the
* data that was written! */
result = usb_control_msg (dev, usb_sndctrlpipe(dev, 0), request, 0x40, address, 0, buffer, length, 300);
static int emi62_set_reset (struct usb_device *dev, unsigned char reset_bit)
{
int response;
- info("%s - %d", __FUNCTION__, reset_bit);
+ info("%s - %d", __func__, reset_bit);
response = emi62_writememory (dev, CPUCS_REG, &reset_bit, 1, 0xa0);
if (response < 0) {
static int emi62_load_firmware (struct usb_device *dev)
{
+ const struct firmware *loader_fw = NULL;
+ const struct firmware *bitstream_fw = NULL;
+ const struct firmware *firmware_fw = NULL;
+ const struct ihex_binrec *rec;
int err;
int i;
- int pos = 0; /* Position in hex record */
__u32 addr; /* Address to write */
__u8 *buf;
dev_dbg(&dev->dev, "load_firmware\n");
buf = kmalloc(FW_LOAD_SIZE, GFP_KERNEL);
if (!buf) {
- err( "%s - error loading firmware: error = %d", __FUNCTION__, -ENOMEM);
+ err( "%s - error loading firmware: error = %d", __func__, -ENOMEM);
err = -ENOMEM;
goto wraperr;
}
+ err = request_ihex_firmware(&loader_fw, "emi62/loader.fw", &dev->dev);
+ if (err)
+ goto nofw;
+
+ err = request_ihex_firmware(&bitstream_fw, "emi62/bitstream.fw",
+ &dev->dev);
+ if (err)
+ goto nofw;
+
+ err = request_ihex_firmware(&firmware_fw, FIRMWARE_FW, &dev->dev);
+ if (err) {
+ nofw:
+ err( "%s - request_firmware() failed", __func__);
+ goto wraperr;
+ }
+
/* Assert reset (stop the CPU in the EMI) */
err = emi62_set_reset(dev,1);
if (err < 0) {
- err("%s - error loading firmware: error = %d", __FUNCTION__, err);
+ err("%s - error loading firmware: error = %d", __func__, err);
goto wraperr;
}
+ rec = (const struct ihex_binrec *)loader_fw->data;
+
/* 1. We need to put the loader for the FPGA into the EZ-USB */
- for (i=0; g_emi62_loader[i].type == 0; i++) {
- err = emi62_writememory(dev, g_emi62_loader[i].address, g_emi62_loader[i].data, g_emi62_loader[i].length, ANCHOR_LOAD_INTERNAL);
+ while (rec) {
+ err = emi62_writememory(dev, be32_to_cpu(rec->addr),
+ rec->data, be16_to_cpu(rec->len),
+ ANCHOR_LOAD_INTERNAL);
if (err < 0) {
- err("%s - error loading firmware: error = %d", __FUNCTION__, err);
+ err("%s - error loading firmware: error = %d", __func__, err);
goto wraperr;
}
+ rec = ihex_next_binrec(rec);
}
/* De-assert reset (let the CPU run) */
err = emi62_set_reset(dev,0);
+ if (err < 0) {
+ err("%s - error loading firmware: error = %d", __func__, err);
+ goto wraperr;
+ }
msleep(250); /* let device settle */
/* 2. We upload the FPGA firmware into the EMI
* Note: collect up to 1023 (yes!) bytes and send them with
* a single request. This is _much_ faster! */
+ rec = (const struct ihex_binrec *)bitstream_fw->data;
do {
i = 0;
- addr = g_emi62bs[pos].address;
+ addr = be32_to_cpu(rec->addr);
/* intel hex records are terminated with type 0 element */
- while ((g_emi62bs[pos].type == 0) && (i + g_emi62bs[pos].length < FW_LOAD_SIZE)) {
- memcpy(buf + i, g_emi62bs[pos].data, g_emi62bs[pos].length);
- i += g_emi62bs[pos].length;
- pos++;
+ while (rec && (i + be16_to_cpu(rec->len) < FW_LOAD_SIZE)) {
+ memcpy(buf + i, rec->data, be16_to_cpu(rec->len));
+ i += be16_to_cpu(rec->len);
+ rec = ihex_next_binrec(rec);
}
err = emi62_writememory(dev, addr, buf, i, ANCHOR_LOAD_FPGA);
if (err < 0) {
- err("%s - error loading firmware: error = %d", __FUNCTION__, err);
+ err("%s - error loading firmware: error = %d", __func__, err);
goto wraperr;
}
} while (i > 0);
/* Assert reset (stop the CPU in the EMI) */
err = emi62_set_reset(dev,1);
if (err < 0) {
- err("%s - error loading firmware: error = %d", __FUNCTION__, err);
+ err("%s - error loading firmware: error = %d", __func__, err);
goto wraperr;
}
/* 3. We need to put the loader for the firmware into the EZ-USB (again...) */
- for (i=0; g_emi62_loader[i].type == 0; i++) {
- err = emi62_writememory(dev, g_emi62_loader[i].address, g_emi62_loader[i].data, g_emi62_loader[i].length, ANCHOR_LOAD_INTERNAL);
+ for (rec = (const struct ihex_binrec *)loader_fw->data;
+ rec; rec = ihex_next_binrec(rec)) {
+ err = emi62_writememory(dev, be32_to_cpu(rec->addr),
+ rec->data, be16_to_cpu(rec->len),
+ ANCHOR_LOAD_INTERNAL);
if (err < 0) {
- err("%s - error loading firmware: error = %d", __FUNCTION__, err);
+ err("%s - error loading firmware: error = %d", __func__, err);
goto wraperr;
}
}
/* De-assert reset (let the CPU run) */
err = emi62_set_reset(dev,0);
if (err < 0) {
- err("%s - error loading firmware: error = %d", __FUNCTION__, err);
+ err("%s - error loading firmware: error = %d", __func__, err);
goto wraperr;
}
msleep(250); /* let device settle */
/* 4. We put the part of the firmware that lies in the external RAM into the EZ-USB */
-/* FIXME: quick and dirty ifdefs */
-#ifdef SPDIF
- for (i=0; g_HexSpdifFw62[i].type == 0; i++) {
- if (!INTERNAL_RAM(g_HexSpdifFw62[i].address)) {
- err = emi62_writememory(dev, g_HexSpdifFw62[i].address, g_HexSpdifFw62[i].data, g_HexSpdifFw62[i].length, ANCHOR_LOAD_EXTERNAL);
+ for (rec = (const struct ihex_binrec *)firmware_fw->data;
+ rec; rec = ihex_next_binrec(rec)) {
+ if (!INTERNAL_RAM(be32_to_cpu(rec->addr))) {
+ err = emi62_writememory(dev, be32_to_cpu(rec->addr),
+ rec->data, be16_to_cpu(rec->len),
+ ANCHOR_LOAD_EXTERNAL);
if (err < 0) {
- err("%s - error loading firmware: error = %d", __FUNCTION__, err);
+ err("%s - error loading firmware: error = %d", __func__, err);
goto wraperr;
}
}
}
-#else /* MIDI */
- for (i=0; g_HexMidiFw62[i].type == 0; i++) {
- if (!INTERNAL_RAM(g_HexMidiFw62[i].address)) {
- err = emi62_writememory(dev, g_HexMidiFw62[i].address, g_HexMidiFw62[i].data, g_HexMidiFw62[i].length, ANCHOR_LOAD_EXTERNAL);
- if (err < 0) {
- err("%s - error loading firmware: error = %d\n", __FUNCTION__, err);
- goto wraperr;
- return err;
- }
- }
- }
-#endif
+
/* Assert reset (stop the CPU in the EMI) */
err = emi62_set_reset(dev,1);
if (err < 0) {
- err("%s - error loading firmware: error = %d", __FUNCTION__, err);
+ err("%s - error loading firmware: error = %d", __func__, err);
goto wraperr;
}
-/* FIXME: quick and dirty ifdefs */
-#ifdef SPDIF
- for (i=0; g_HexSpdifFw62[i].type == 0; i++) {
- if (INTERNAL_RAM(g_HexSpdifFw62[i].address)) {
- err = emi62_writememory(dev, g_HexSpdifFw62[i].address, g_HexSpdifFw62[i].data, g_HexSpdifFw62[i].length, ANCHOR_LOAD_INTERNAL);
- if (err < 0) {
- err("%s - error loading firmware: error = %d", __FUNCTION__, err);
- goto wraperr;
- }
- }
- }
-#else /* MIDI */
- for (i=0; g_HexMidiFw62[i].type == 0; i++) {
- if (INTERNAL_RAM(g_HexMidiFw62[i].address)) {
- err = emi62_writememory(dev, g_HexMidiFw62[i].address, g_HexMidiFw62[i].data, g_HexMidiFw62[i].length, ANCHOR_LOAD_INTERNAL);
+ for (rec = (const struct ihex_binrec *)firmware_fw->data;
+ rec; rec = ihex_next_binrec(rec)) {
+ if (INTERNAL_RAM(be32_to_cpu(rec->addr))) {
+ err = emi62_writememory(dev, be32_to_cpu(rec->addr),
+ rec->data, be16_to_cpu(rec->len),
+ ANCHOR_LOAD_EXTERNAL);
if (err < 0) {
- err("%s - error loading firmware: error = %d\n", __FUNCTION__, err);
+ err("%s - error loading firmware: error = %d", __func__, err);
goto wraperr;
}
}
}
-#endif
-
+
/* De-assert reset (let the CPU run) */
err = emi62_set_reset(dev,0);
if (err < 0) {
- err("%s - error loading firmware: error = %d", __FUNCTION__, err);
+ err("%s - error loading firmware: error = %d", __func__, err);
goto wraperr;
}
msleep(250); /* let device settle */
+ release_firmware(loader_fw);
+ release_firmware(bitstream_fw);
+ release_firmware(firmware_fw);
+
kfree(buf);
/* return 1 to fail the driver inialization
return 1;
wraperr:
+ release_firmware(loader_fw);
+ release_firmware(bitstream_fw);
+ release_firmware(firmware_fw);
+
kfree(buf);
dev_err(&dev->dev, "Error\n");
return err;
struct usb_device *dev = interface_to_usbdev(intf);
dev_dbg(&intf->dev, "emi62_probe\n");
- info("%s start", __FUNCTION__);
+ info("%s start", __func__);
emi62_load_firmware(dev);
module_init(emi62_init);
module_exit(emi62_exit);
-MODULE_AUTHOR("tapio laxström");
+MODULE_AUTHOR("Tapio Laxström");
MODULE_DESCRIPTION("Emagic EMI 6|2m firmware loader.");
MODULE_LICENSE("GPL");
+MODULE_FIRMWARE("emi62/loader.fw");
+MODULE_FIRMWARE("emi62/bitstream.fw");
+MODULE_FIRMWARE(FIRMWARE_FW);
/* vi:ai:syntax=c:sw=8:ts=8:tw=80
*/
projects / linux-2.6 / blobdiff