#define UHCI_MAX_SOF_NUMBER 2047 /* in an SOF packet */
#define CAN_SCHEDULE_FRAMES 1000 /* how far in the future frames
* can be scheduled */
+#define MAX_PHASE 32 /* Periodic scheduling length */
/* When no queues need Full-Speed Bandwidth Reclamation,
* delay this long before turning FSBR off */
-#define FSBR_OFF_DELAY msecs_to_jiffies(400)
+#define FSBR_OFF_DELAY msecs_to_jiffies(10)
/* If a queue hasn't advanced after this much time, assume it is stuck */
#define QH_WAIT_TIMEOUT msecs_to_jiffies(200)
struct usb_host_endpoint *hep; /* Endpoint information */
struct usb_device *udev;
struct list_head queue; /* Queue of urbps for this QH */
- struct uhci_qh *skel; /* Skeleton for this QH */
struct uhci_td *dummy_td; /* Dummy TD to end the queue */
struct uhci_td *post_td; /* Last TD completed */
+ struct usb_iso_packet_descriptor *iso_packet_desc;
+ /* Next urb->iso_frame_desc entry */
unsigned long advance_jiffies; /* Time of last queue advance */
unsigned int unlink_frame; /* When the QH was unlinked */
+ unsigned int period; /* For Interrupt and Isochronous QHs */
+ short phase; /* Between 0 and period-1 */
+ short load; /* Periodic time requirement, in us */
+ unsigned int iso_frame; /* Frame # for iso_packet_desc */
+ int iso_status; /* Status for Isochronous URBs */
+
int state; /* QH_STATE_xxx; see above */
int type; /* Queue type (control, bulk, etc) */
+ int skel; /* Skeleton queue number */
unsigned int initial_toggle:1; /* Endpoint's current toggle value */
unsigned int needs_fixup:1; /* Must fix the TD toggle values */
unsigned int is_stopped:1; /* Queue was stopped by error/unlink */
unsigned int wait_expired:1; /* QH_WAIT_TIMEOUT has expired */
+ unsigned int bandwidth_reserved:1; /* Periodic bandwidth has
+ * been allocated */
} __attribute__((aligned(16)));
/*
return element;
}
+#define LINK_TO_QH(qh) (UHCI_PTR_QH | cpu_to_le32((qh)->dma_handle))
+
/*
* Transfer Descriptors
return le32_to_cpu(status);
}
+#define LINK_TO_TD(td) (cpu_to_le32((td)->dma_handle))
+
/*
* Skeleton Queue Headers
/*
* The UHCI driver uses QHs with Interrupt, Control and Bulk URBs for
* automatic queuing. To make it easy to insert entries into the schedule,
- * we have a skeleton of QHs for each predefined Interrupt latency,
- * low-speed control, full-speed control, bulk, and terminating QH
- * (see explanation for the terminating QH below).
+ * we have a skeleton of QHs for each predefined Interrupt latency.
+ * Asynchronous QHs (low-speed control, full-speed control, and bulk)
+ * go onto the period-1 interrupt list, since they all get accessed on
+ * every frame.
*
- * When we want to add a new QH, we add it to the end of the list for the
- * skeleton QH. For instance, the schedule list can look like this:
+ * When we want to add a new QH, we add it to the list starting from the
+ * appropriate skeleton QH. For instance, the schedule can look like this:
*
* skel int128 QH
* dev 1 interrupt QH
* skel int64 QH
* skel int32 QH
* ...
- * skel int1 QH
- * skel low-speed control QH
- * dev 5 control QH
- * skel full-speed control QH
- * skel bulk QH
+ * skel int1 + async QH
+ * dev 5 low-speed control QH
* dev 1 bulk QH
* dev 2 bulk QH
- * skel terminating QH
*
- * The terminating QH is used for 2 reasons:
- * - To place a terminating TD which is used to workaround a PIIX bug
- * (see Intel errata for explanation), and
- * - To loop back to the full-speed control queue for full-speed bandwidth
- * reclamation.
+ * There is a special terminating QH used to keep full-speed bandwidth
+ * reclamation active when no full-speed control or bulk QHs are linked
+ * into the schedule. It has an inactive TD (to work around a PIIX bug,
+ * see the Intel errata) and it points back to itself.
*
- * There's a special skeleton QH for Isochronous QHs. It never appears
- * on the schedule, and Isochronous TDs go on the schedule before the
+ * There's a special skeleton QH for Isochronous QHs which never appears
+ * on the schedule. Isochronous TDs go on the schedule before the
* the skeleton QHs. The hardware accesses them directly rather than
* through their QH, which is used only for bookkeeping purposes.
* While the UHCI spec doesn't forbid the use of QHs for Isochronous,
* it doesn't use them either. And the spec says that queues never
* advance on an error completion status, which makes them totally
* unsuitable for Isochronous transfers.
- */
-
-#define UHCI_NUM_SKELQH 14
-#define skel_unlink_qh skelqh[0]
-#define skel_iso_qh skelqh[1]
-#define skel_int128_qh skelqh[2]
-#define skel_int64_qh skelqh[3]
-#define skel_int32_qh skelqh[4]
-#define skel_int16_qh skelqh[5]
-#define skel_int8_qh skelqh[6]
-#define skel_int4_qh skelqh[7]
-#define skel_int2_qh skelqh[8]
-#define skel_int1_qh skelqh[9]
-#define skel_ls_control_qh skelqh[10]
-#define skel_fs_control_qh skelqh[11]
-#define skel_bulk_qh skelqh[12]
-#define skel_term_qh skelqh[13]
-
-/*
- * Search tree for determining where <interval> fits in the skelqh[]
- * skeleton.
*
- * An interrupt request should be placed into the slowest skelqh[]
- * which meets the interval/period/frequency requirement.
- * An interrupt request is allowed to be faster than <interval> but not slower.
- *
- * For a given <interval>, this function returns the appropriate/matching
- * skelqh[] index value.
+ * There's also a special skeleton QH used for QHs which are in the process
+ * of unlinking and so may still be in use by the hardware. It too never
+ * appears on the schedule.
*/
-static inline int __interval_to_skel(int interval)
-{
- if (interval < 16) {
- if (interval < 4) {
- if (interval < 2)
- return 9; /* int1 for 0-1 ms */
- return 8; /* int2 for 2-3 ms */
- }
- if (interval < 8)
- return 7; /* int4 for 4-7 ms */
- return 6; /* int8 for 8-15 ms */
- }
- if (interval < 64) {
- if (interval < 32)
- return 5; /* int16 for 16-31 ms */
- return 4; /* int32 for 32-63 ms */
- }
- if (interval < 128)
- return 3; /* int64 for 64-127 ms */
- return 2; /* int128 for 128-255 ms (Max.) */
-}
+#define UHCI_NUM_SKELQH 11
+#define SKEL_UNLINK 0
+#define skel_unlink_qh skelqh[SKEL_UNLINK]
+#define SKEL_ISO 1
+#define skel_iso_qh skelqh[SKEL_ISO]
+ /* int128, int64, ..., int1 = 2, 3, ..., 9 */
+#define SKEL_INDEX(exponent) (9 - exponent)
+#define SKEL_ASYNC 9
+#define skel_async_qh skelqh[SKEL_ASYNC]
+#define SKEL_TERM 10
+#define skel_term_qh skelqh[SKEL_TERM]
+
+/* The following entries refer to sublists of skel_async_qh */
+#define SKEL_LS_CONTROL 20
+#define SKEL_FS_CONTROL 21
+#define SKEL_FSBR SKEL_FS_CONTROL
+#define SKEL_BULK 22
/*
* The UHCI controller and root hub
__le32 *frame;
void **frame_cpu; /* CPU's frame list */
- unsigned long fsbr_jiffies; /* Time when FSBR was last wanted */
-
enum uhci_rh_state rh_state;
unsigned long auto_stop_time; /* When to AUTO_STOP */
unsigned int frame_number; /* As of last check */
unsigned int is_stopped;
#define UHCI_IS_STOPPED 9999 /* Larger than a frame # */
+ unsigned int last_iso_frame; /* Frame of last scan */
+ unsigned int cur_iso_frame; /* Frame for current scan */
unsigned int scan_in_progress:1; /* Schedule scan is running */
unsigned int need_rescan:1; /* Redo the schedule scan */
- unsigned int hc_inaccessible:1; /* HC is suspended or dead */
+ unsigned int dead:1; /* Controller has died */
unsigned int working_RD:1; /* Suspended root hub doesn't
need to be polled */
unsigned int is_initialized:1; /* Data structure is usable */
unsigned int fsbr_is_on:1; /* FSBR is turned on */
+ unsigned int fsbr_is_wanted:1; /* Does any URB want FSBR? */
+ unsigned int fsbr_expiring:1; /* FSBR is timing out */
+
+ struct timer_list fsbr_timer; /* For turning off FBSR */
/* Support for port suspend/resume/reset */
unsigned long port_c_suspend; /* Bit-arrays of ports */
wait_queue_head_t waitqh; /* endpoint_disable waiters */
int num_waiting; /* Number of waiters */
+
+ int total_load; /* Sum of array values */
+ short load[MAX_PHASE]; /* Periodic allocations */
};
/* Convert between a usb_hcd pointer and the corresponding uhci_hcd */
#define uhci_dev(u) (uhci_to_hcd(u)->self.controller)
+/* Utility macro for comparing frame numbers */
+#define uhci_frame_before_eq(f1, f2) (0 <= (int) ((f2) - (f1)))
+
/*
* Private per-URB data