/*-------------------------------------------------------------------------*/
-/* hcd->hub_irq_enable() */
-static void ohci_rhsc_enable (struct usb_hcd *hcd)
-{
- struct ohci_hcd *ohci = hcd_to_ohci (hcd);
-
- spin_lock_irq(&ohci->lock);
- if (!ohci->autostop)
- del_timer(&hcd->rh_timer); /* Prevent next poll */
- ohci_writel(ohci, OHCI_INTR_RHSC, &ohci->regs->intrenable);
- spin_unlock_irq(&ohci->lock);
-}
-
#define OHCI_SCHED_ENABLES \
(OHCI_CTRL_CLE|OHCI_CTRL_BLE|OHCI_CTRL_PLE|OHCI_CTRL_IE)
finish_unlinks (ohci, ohci_frame_no(ohci));
/* maybe resume can wake root hub */
- if (device_may_wakeup(&ohci_to_hcd(ohci)->self.root_hub->dev) ||
- autostop)
+ if (ohci_to_hcd(ohci)->self.root_hub->do_remote_wakeup || autostop) {
ohci->hc_control |= OHCI_CTRL_RWE;
- else {
- ohci_writel (ohci, OHCI_INTR_RHSC, &ohci->regs->intrdisable);
+ } else {
+ ohci_writel(ohci, OHCI_INTR_RHSC | OHCI_INTR_RD,
+ &ohci->regs->intrdisable);
ohci->hc_control &= ~OHCI_CTRL_RWE;
}
return rc;
}
+/* Carry out the final steps of resuming the controller device */
+static void ohci_finish_controller_resume(struct usb_hcd *hcd)
+{
+ struct ohci_hcd *ohci = hcd_to_ohci(hcd);
+ int port;
+ bool need_reinit = false;
+
+ /* See if the controller is already running or has been reset */
+ ohci->hc_control = ohci_readl(ohci, &ohci->regs->control);
+ if (ohci->hc_control & (OHCI_CTRL_IR | OHCI_SCHED_ENABLES)) {
+ need_reinit = true;
+ } else {
+ switch (ohci->hc_control & OHCI_CTRL_HCFS) {
+ case OHCI_USB_OPER:
+ case OHCI_USB_RESET:
+ need_reinit = true;
+ }
+ }
+
+ /* If needed, reinitialize and suspend the root hub */
+ if (need_reinit) {
+ spin_lock_irq(&ohci->lock);
+ hcd->state = HC_STATE_RESUMING;
+ ohci_rh_resume(ohci);
+ hcd->state = HC_STATE_QUIESCING;
+ ohci_rh_suspend(ohci, 0);
+ hcd->state = HC_STATE_SUSPENDED;
+ spin_unlock_irq(&ohci->lock);
+ }
+
+ /* Normally just turn on port power and enable interrupts */
+ else {
+ ohci_dbg(ohci, "powerup ports\n");
+ for (port = 0; port < ohci->num_ports; port++)
+ ohci_writel(ohci, RH_PS_PPS,
+ &ohci->regs->roothub.portstatus[port]);
+
+ ohci_writel(ohci, OHCI_INTR_MIE, &ohci->regs->intrenable);
+ ohci_readl(ohci, &ohci->regs->intrenable);
+ msleep(20);
+ }
+}
+
/* Carry out polling-, autostop-, and autoresume-related state changes */
static int ohci_root_hub_state_changes(struct ohci_hcd *ohci, int changed,
int any_connected)
{
int poll_rh = 1;
+ int rhsc;
+ rhsc = ohci_readl(ohci, &ohci->regs->intrenable) & OHCI_INTR_RHSC;
switch (ohci->hc_control & OHCI_CTRL_HCFS) {
case OHCI_USB_OPER:
- /* keep on polling until we know a device is connected
- * and RHSC is enabled */
+ /* If no status changes are pending, enable status-change
+ * interrupts.
+ */
+ if (!rhsc && !changed) {
+ rhsc = OHCI_INTR_RHSC;
+ ohci_writel(ohci, rhsc, &ohci->regs->intrenable);
+ }
+
+ /* Keep on polling until we know a device is connected
+ * and RHSC is enabled, or until we autostop.
+ */
if (!ohci->autostop) {
if (any_connected ||
!device_may_wakeup(&ohci_to_hcd(ohci)
->self.root_hub->dev)) {
- if (ohci_readl(ohci, &ohci->regs->intrenable) &
- OHCI_INTR_RHSC)
+ if (rhsc)
poll_rh = 0;
} else {
ohci->autostop = 1;
ohci->autostop = 0;
ohci->next_statechange = jiffies +
STATECHANGE_DELAY;
- } else if (time_after_eq(jiffies,
+ } else if (rhsc && time_after_eq(jiffies,
ohci->next_statechange)
&& !ohci->ed_rm_list
&& !(ohci->hc_control &
OHCI_SCHED_ENABLES)) {
ohci_rh_suspend(ohci, 1);
+ poll_rh = 0;
}
}
break;
else
usb_hcd_resume_root_hub(ohci_to_hcd(ohci));
} else {
+ if (!rhsc && (ohci->autostop ||
+ ohci_to_hcd(ohci)->self.root_hub->
+ do_remote_wakeup))
+ ohci_writel(ohci, OHCI_INTR_RHSC,
+ &ohci->regs->intrenable);
+
/* everything is idle, no need for polling */
poll_rh = 0;
}
static int ohci_root_hub_state_changes(struct ohci_hcd *ohci, int changed,
int any_connected)
{
- int poll_rh = 1;
-
- /* keep on polling until RHSC is enabled */
+ /* If RHSC is enabled, don't poll */
if (ohci_readl(ohci, &ohci->regs->intrenable) & OHCI_INTR_RHSC)
- poll_rh = 0;
- return poll_rh;
+ return 0;
+
+ /* If no status changes are pending, enable status-change interrupts */
+ if (!changed) {
+ ohci_writel(ohci, OHCI_INTR_RHSC, &ohci->regs->intrenable);
+ return 0;
+ }
+ return 1;
}
#endif /* CONFIG_PM */
static inline int root_port_reset (struct ohci_hcd *ohci, unsigned port)
{
__hc32 __iomem *portstat = &ohci->regs->roothub.portstatus [port];
- u32 temp;
+ u32 temp = 0;
u16 now = ohci_readl(ohci, &ohci->regs->fmnumber);
u16 reset_done = now + PORT_RESET_MSEC;
+ int limit_1 = DIV_ROUND_UP(PORT_RESET_MSEC, PORT_RESET_HW_MSEC);
/* build a "continuous enough" reset signal, with up to
* 3msec gap between pulses. scheduler HZ==100 must work;
* this might need to be deadline-scheduled.
*/
do {
+ int limit_2;
+
/* spin until any current reset finishes */
- for (;;) {
+ limit_2 = PORT_RESET_HW_MSEC * 2;
+ while (--limit_2 >= 0) {
temp = ohci_readl (ohci, portstat);
/* handle e.g. CardBus eject */
if (temp == ~(u32)0)
udelay (500);
}
+ /* timeout (a hardware error) has been observed when
+ * EHCI sets CF while this driver is resetting a port;
+ * presumably other disconnect paths might do it too.
+ */
+ if (limit_2 < 0) {
+ ohci_dbg(ohci,
+ "port[%d] reset timeout, stat %08x\n",
+ port, temp);
+ break;
+ }
+
if (!(temp & RH_PS_CCS))
break;
if (temp & RH_PS_PRSC)
ohci_writel (ohci, RH_PS_PRS, portstat);
msleep(PORT_RESET_HW_MSEC);
now = ohci_readl(ohci, &ohci->regs->fmnumber);
- } while (tick_before(now, reset_done));
- /* caller synchronizes using PRSC */
+ } while (tick_before(now, reset_done) && --limit_1 >= 0);
+
+ /* caller synchronizes using PRSC ... and handles PRS
+ * still being set when this returns.
+ */
return 0;
}
break;
case GetHubStatus:
temp = roothub_status (ohci) & ~(RH_HS_CRWE | RH_HS_DRWE);
- put_unaligned(cpu_to_le32 (temp), (__le32 *) buf);
+ put_unaligned_le32(temp, buf);
break;
case GetPortStatus:
if (!wIndex || wIndex > ports)
goto error;
wIndex--;
temp = roothub_portstatus (ohci, wIndex);
- put_unaligned(cpu_to_le32 (temp), (__le32 *) buf);
+ put_unaligned_le32(temp, buf);
#ifndef OHCI_VERBOSE_DEBUG
if (*(u16*)(buf+2)) /* only if wPortChange is interesting */
projects / linux-2.6 / blobdiff