Merge branches 'arm-mm', 'at91', 'clkevts', 'imx', 'iop', 'misc', 'netx', 'ns9xxx...

[linux-2.6] / drivers / usb / gadget / pxa2xx_udc.c

diff --git a/drivers/usb/gadget/pxa2xx_udc.c b/drivers/usb/gadget/pxa2xx_udc.c
index f1adcf8b202307f4d6bf0c1b4d373541ccc4ab14..018b0d65765aa60e3b9028123184165bf89bd767 100644 (file)
--- a/drivers/usb/gadget/pxa2xx_udc.c
+++ b/drivers/usb/gadget/pxa2xx_udc.c
@@ -33,7 +33,6 @@
 #include <linux/types.h>
 #include <linux/errno.h>
 #include <linux/delay.h>
-#include <linux/sched.h>
 #include <linux/slab.h>
 #include <linux/init.h>
 #include <linux/timer.h>
@@ -43,11 +42,11 @@
 #include <linux/mm.h>
 #include <linux/platform_device.h>
 #include <linux/dma-mapping.h>
+#include <linux/irq.h>
 
 #include <asm/byteorder.h>
 #include <asm/dma.h>
 #include <asm/io.h>
-#include <asm/irq.h>
 #include <asm/system.h>
 #include <asm/mach-types.h>
 #include <asm/unaligned.h>
@@ -56,7 +55,7 @@
 #include <asm/arch/pxa-regs.h>
 #endif
 
-#include <linux/usb_ch9.h>
+#include <linux/usb/ch9.h>
 #include <linux/usb_gadget.h>
 
 #include <asm/arch/udc.h>
@@ -110,7 +109,7 @@ static int use_dma = 1;
 module_param(use_dma, bool, 0);
 MODULE_PARM_DESC (use_dma, "true to use dma");
 
-static void dma_nodesc_handler (int dmach, void *_ep, struct pt_regs *r);
+static void dma_nodesc_handler (int dmach, void *_ep);
 static void kick_dma(struct pxa2xx_ep *ep, struct pxa2xx_request *req);
 
 #ifdef USE_OUT_DMA
@@ -156,7 +155,7 @@ static int is_vbus_present(void)
        struct pxa2xx_udc_mach_info             *mach = the_controller->mach;
 
        if (mach->gpio_vbus)
-               return pxa_gpio_get(mach->gpio_vbus);
+               return udc_gpio_get(mach->gpio_vbus);
        if (mach->udc_is_connected)
                return mach->udc_is_connected();
        return 1;
@@ -168,7 +167,7 @@ static void pullup_off(void)
        struct pxa2xx_udc_mach_info             *mach = the_controller->mach;
 
        if (mach->gpio_pullup)
-               pxa_gpio_set(mach->gpio_pullup, 0);
+               udc_gpio_set(mach->gpio_pullup, 0);
        else if (mach->udc_command)
                mach->udc_command(PXA2XX_UDC_CMD_DISCONNECT);
 }
@@ -178,7 +177,7 @@ static void pullup_on(void)
        struct pxa2xx_udc_mach_info             *mach = the_controller->mach;
 
        if (mach->gpio_pullup)
-               pxa_gpio_set(mach->gpio_pullup, 1);
+               udc_gpio_set(mach->gpio_pullup, 1);
        else if (mach->udc_command)
                mach->udc_command(PXA2XX_UDC_CMD_CONNECT);
 }
@@ -828,7 +827,7 @@ static void cancel_dma(struct pxa2xx_ep *ep)
 }
 
 /* dma channel stopped ... normal tx end (IN), or on error (IN/OUT) */
-static void dma_nodesc_handler(int dmach, void *_ep, struct pt_regs *r)
+static void dma_nodesc_handler(int dmach, void *_ep)
 {
        struct pxa2xx_ep        *ep = _ep;
        struct pxa2xx_request   *req;
@@ -1498,7 +1497,7 @@ static void udc_disable(struct pxa2xx_udc *dev)
 
 #ifdef CONFIG_ARCH_PXA
         /* Disable clock for USB device */
-       pxa_set_cken(CKEN11_USB, 0);
+       pxa_set_cken(CKEN_USB, 0);
 #endif
 
        ep0_idle (dev);
@@ -1544,7 +1543,7 @@ static void udc_enable (struct pxa2xx_udc *dev)
 
 #ifdef CONFIG_ARCH_PXA
         /* Enable clock for USB device */
-       pxa_set_cken(CKEN11_USB, 1);
+       pxa_set_cken(CKEN_USB, 1);
        udelay(5);
 #endif
 
@@ -1623,7 +1622,6 @@ int usb_gadget_register_driver(struct usb_gadget_driver *driver)
        if (!driver
                        || driver->speed < USB_SPEED_FULL
                        || !driver->bind
-                       || !driver->unbind
                        || !driver->disconnect
                        || !driver->setup)
                return -EINVAL;
@@ -1694,7 +1692,7 @@ int usb_gadget_unregister_driver(struct usb_gadget_driver *driver)
 
        if (!dev)
                return -ENODEV;
-       if (!driver || driver != dev->driver)
+       if (!driver || driver != dev->driver || !driver->unbind)
                return -EINVAL;
 
        local_irq_disable();
@@ -1724,7 +1722,7 @@ EXPORT_SYMBOL(usb_gadget_unregister_driver);
  */
 
 static irqreturn_t
-lubbock_vbus_irq(int irq, void *_dev, struct pt_regs *r)
+lubbock_vbus_irq(int irq, void *_dev)
 {
        struct pxa2xx_udc       *dev = _dev;
        int                     vbus;
@@ -1754,11 +1752,10 @@ lubbock_vbus_irq(int irq, void *_dev, struct pt_regs *r)
 
 #endif
 
-static irqreturn_t
-udc_vbus_irq(int irq, void *_dev, struct pt_regs *r)
+static irqreturn_t udc_vbus_irq(int irq, void *_dev)
 {
        struct pxa2xx_udc       *dev = _dev;
-       int                     vbus = pxa_gpio_get(dev->mach->gpio_vbus);
+       int                     vbus = udc_gpio_get(dev->mach->gpio_vbus);
 
        pxa2xx_udc_vbus_session(&dev->gadget, vbus);
        return IRQ_HANDLED;
@@ -2084,7 +2081,7 @@ static void handle_ep(struct pxa2xx_ep *ep)
  * could cause usb protocol errors.
  */
 static irqreturn_t
-pxa2xx_udc_irq(int irq, void *_dev, struct pt_regs *r)
+pxa2xx_udc_irq(int irq, void *_dev)
 {
        struct pxa2xx_udc       *dev = _dev;
        int                     handled;
@@ -2473,6 +2470,7 @@ static struct pxa2xx_udc memory = {
 #define PXA210_B1              0x00000123
 #define PXA210_B0              0x00000122
 #define IXP425_A0              0x000001c1
+#define IXP425_B0              0x000001f1
 #define IXP465_AD              0x00000200
 
 /*
@@ -2510,6 +2508,7 @@ static int __init pxa2xx_udc_probe(struct platform_device *pdev)
                break;
 #elif  defined(CONFIG_ARCH_IXP4XX)
        case IXP425_A0:
+       case IXP425_B0:
        case IXP465_AD:
                dev->has_cfr = 1;
                out_dma = 0;
@@ -2546,15 +2545,13 @@ static int __init pxa2xx_udc_probe(struct platform_device *pdev)
        dev->dev = &pdev->dev;
        dev->mach = pdev->dev.platform_data;
        if (dev->mach->gpio_vbus) {
-               vbus_irq = IRQ_GPIO(dev->mach->gpio_vbus & GPIO_MD_MASK_NR);
-               pxa_gpio_mode((dev->mach->gpio_vbus & GPIO_MD_MASK_NR)
-                               | GPIO_IN);
+               udc_gpio_init_vbus(dev->mach->gpio_vbus);
+               vbus_irq = udc_gpio_to_irq(dev->mach->gpio_vbus);
                set_irq_type(vbus_irq, IRQT_BOTHEDGE);
        } else
                vbus_irq = 0;
        if (dev->mach->gpio_pullup)
-               pxa_gpio_mode((dev->mach->gpio_pullup & GPIO_MD_MASK_NR)
-                               | GPIO_OUT | GPIO_DFLT_LOW);
+               udc_gpio_init_pullup(dev->mach->gpio_pullup);
 
        init_timer(&dev->timer);
        dev->timer.function = udc_watchdog;
@@ -2614,7 +2611,7 @@ lubbock_fail0:
 #endif
        if (vbus_irq) {
                retval = request_irq(vbus_irq, udc_vbus_irq,
-                               SA_INTERRUPT | SA_SAMPLE_RANDOM,
+                               IRQF_DISABLED | IRQF_SAMPLE_RANDOM,
                                driver_name, dev);
                if (retval != 0) {
                        printk(KERN_ERR "%s: can't get irq %i, err %d\n",
@@ -2637,9 +2634,11 @@ static int __exit pxa2xx_udc_remove(struct platform_device *pdev)
 {
        struct pxa2xx_udc *dev = platform_get_drvdata(pdev);
 
+       if (dev->driver)
+               return -EBUSY;
+
        udc_disable(dev);
        remove_proc_files();
-       usb_gadget_unregister_driver(dev->driver);
 
        if (dev->got_irq) {
                free_irq(IRQ_USB, dev);