# With help from a special transceiver and a "Mini-AB" jack, systems with
# both kinds of controller can also support "USB On-the-Go" (CONFIG_USB_OTG).
#
-menu "USB Gadget Support"
-config USB_GADGET
- tristate "Support for USB Gadgets"
+menuconfig USB_GADGET
+ tristate "USB Gadget Support"
help
USB is a master/slave protocol, organized with one master
host (such as a PC) controlling up to 127 peripheral devices.
For more information, see <http://www.linux-usb.org/gadget> and
the kernel DocBook documentation for this API.
+if USB_GADGET
+
config USB_GADGET_DEBUG
- boolean "Debugging messages"
- depends on USB_GADGET && DEBUG_KERNEL && EXPERIMENTAL
+ boolean "Debugging messages (DEVELOPMENT)"
+ depends on USB_GADGET && DEBUG_KERNEL
help
Many controller and gadget drivers will print some debugging
messages if you use this option to ask for those messages.
production build.
config USB_GADGET_DEBUG_FILES
- boolean "Debugging information files"
+ boolean "Debugging information files (DEVELOPMENT)"
depends on USB_GADGET && PROC_FS
help
Some of the drivers in the "gadget" framework can expose
here. If in doubt, or to conserve kernel memory, say "N".
config USB_GADGET_DEBUG_FS
- boolean "Debugging information files in debugfs"
+ boolean "Debugging information files in debugfs (DEVELOPMENT)"
depends on USB_GADGET && DEBUG_FS
help
Some of the drivers in the "gadget" framework can expose
config USB_GADGET_ATMEL_USBA
boolean "Atmel USBA"
select USB_GADGET_DUALSPEED
- depends on AVR32
+ depends on AVR32 || ARCH_AT91CAP9 || ARCH_AT91SAM9RL
help
USBA is the integrated high-speed USB Device controller on
- the AT32AP700x processors from Atmel.
+ the AT32AP700x, some AT91SAM9 and AT91CAP9 processors from Atmel.
config USB_ATMEL_USBA
tristate
config USB_GADGET_FSL_USB2
boolean "Freescale Highspeed USB DR Peripheral Controller"
- depends on MPC834x || PPC_MPC831x
+ depends on FSL_SOC
select USB_GADGET_DUALSPEED
help
Some of Freescale PowerPC processors have a High Speed
default USB_GADGET
select USB_GADGET_SELECTED
-config USB_GADGET_PXA2XX
+config USB_GADGET_PXA25X
boolean "PXA 25x or IXP 4xx"
depends on (ARCH_PXA && PXA25x) || ARCH_IXP4XX
help
zero (for control transfers).
Say "y" to link the driver statically, or "m" to build a
- dynamically linked module called "pxa2xx_udc" and force all
+ dynamically linked module called "pxa25x_udc" and force all
gadget drivers to also be dynamically linked.
-config USB_PXA2XX
+config USB_PXA25X
tristate
- depends on USB_GADGET_PXA2XX
+ depends on USB_GADGET_PXA25X
default USB_GADGET
select USB_GADGET_SELECTED
# if there's only one gadget driver, using only two bulk endpoints,
# don't waste memory for the other endpoints
-config USB_PXA2XX_SMALL
- depends on USB_GADGET_PXA2XX
+config USB_PXA25X_SMALL
+ depends on USB_GADGET_PXA25X
bool
default n if USB_ETH_RNDIS
default y if USB_ZERO
However, this problem is improved if change a value of
NET_IP_ALIGN to 4.
+config USB_GADGET_PXA27X
+ boolean "PXA 27x"
+ depends on ARCH_PXA && PXA27x
+ help
+ Intel's PXA 27x series XScale ARM v5TE processors include
+ an integrated full speed USB 1.1 device controller.
+
+ It has up to 23 endpoints, as well as endpoint zero (for
+ control transfers).
+
+ Say "y" to link the driver statically, or "m" to build a
+ dynamically linked module called "pxa27x_udc" and force all
+ gadget drivers to also be dynamically linked.
+
+config USB_PXA27X
+ tristate
+ depends on USB_GADGET_PXA27X
+ default USB_GADGET
+ select USB_GADGET_SELECTED
+
config USB_GADGET_GOKU
boolean "Toshiba TC86C001 'Goku-S'"
depends on PCI
config USB_GADGET_DUMMY_HCD
boolean "Dummy HCD (DEVELOPMENT)"
- depends on (USB=y || (USB=m && USB_GADGET=m)) && EXPERIMENTAL
+ depends on USB=y || (USB=m && USB_GADGET=m)
select USB_GADGET_DUALSPEED
help
This host controller driver emulates USB, looping all data transfer
config USB_ZERO
tristate "Gadget Zero (DEVELOPMENT)"
- depends on EXPERIMENTAL
help
Gadget Zero is a two-configuration device. It either sinks and
sources bulk data; or it loops back a configurable number of
dynamically linked module called "g_ether".
config USB_ETH_RNDIS
- bool "RNDIS support (EXPERIMENTAL)"
- depends on USB_ETH && EXPERIMENTAL
+ bool "RNDIS support"
+ depends on USB_ETH
default y
help
Microsoft Windows XP bundles the "Remote NDIS" (RNDIS) protocol,
All endpoints, transfer speeds, and transfer types supported by
the hardware are available, through read() and write() calls.
+ Currently, this option is still labelled as EXPERIMENTAL because
+ of existing race conditions in the underlying in-kernel AIO core.
+
Say "y" to link the driver statically, or "m" to build a
dynamically linked module called "gadgetfs".
Say "y" to link the driver statically, or "m" to build a
dynamically linked module called "g_midi".
+config USB_G_PRINTER
+ tristate "Printer Gadget"
+ help
+ The Printer Gadget channels data between the USB host and a
+ userspace program driving the print engine. The user space
+ program reads and writes the device file /dev/g_printer to
+ receive or send printer data. It can use ioctl calls to
+ the device file to get or set printer status.
+
+ Say "y" to link the driver statically, or "m" to build a
+ dynamically linked module called "g_printer".
+
+ For more information, see Documentation/usb/gadget_printer.txt
+ which includes sample code for accessing the device file.
# put drivers that need isochronous transfer support (for audio
# or video class gadget drivers), or specific hardware, here.
endchoice
-endmenu
+endif # USB_GADGET