if ((ep->desc.bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) ==
USB_ENDPOINT_XFER_INT) {
- int interval;
-
- if (usb_dev->speed == USB_SPEED_HIGH)
- interval = 1 << min(15, ep->desc.bInterval - 1);
- else
- interval = ep->desc.bInterval;
pipe = (pipe & ~(3 << 30)) | (PIPE_INTERRUPT << 30);
usb_fill_int_urb(urb, usb_dev, pipe, data, len,
- usb_api_blocking_completion, NULL, interval);
+ usb_api_blocking_completion, NULL,
+ ep->desc.bInterval);
} else
usb_fill_bulk_urb(urb, usb_dev, pipe, data, len,
usb_api_blocking_completion, NULL);
io->urbs [i]->complete = sg_complete;
io->urbs [i]->context = io;
- io->urbs [i]->status = -EINPROGRESS;
- io->urbs [i]->actual_length = 0;
+ /*
+ * Some systems need to revert to PIO when DMA is temporarily
+ * unavailable. For their sakes, both transfer_buffer and
+ * transfer_dma are set when possible. However this can only
+ * work on systems without HIGHMEM, since DMA buffers located
+ * in high memory are not directly addressable by the CPU for
+ * PIO ... so when HIGHMEM is in use, transfer_buffer is NULL
+ * to prevent stale pointers and to help spot bugs.
+ */
if (dma) {
- /* hc may use _only_ transfer_dma */
io->urbs [i]->transfer_dma = sg_dma_address (sg + i);
len = sg_dma_len (sg + i);
+#ifdef CONFIG_HIGHMEM
+ io->urbs[i]->transfer_buffer = NULL;
+#else
+ io->urbs[i]->transfer_buffer =
+ page_address(sg[i].page) + sg[i].offset;
+#endif
} else {
/* hc may use _only_ transfer_buffer */
io->urbs [i]->transfer_buffer =
/* queue the urbs. */
spin_lock_irq (&io->lock);
- for (i = 0; i < entries && !io->status; i++) {
+ i = 0;
+ while (i < entries && !io->status) {
int retval;
io->urbs [i]->dev = io->dev;
case -ENOMEM:
io->urbs[i]->dev = NULL;
retval = 0;
- i--;
yield ();
break;
* URBs are queued at once; N milliseconds?
*/
case 0:
+ ++i;
cpu_relax ();
break;
.uevent = usb_if_uevent,
};
+static struct usb_interface_assoc_descriptor *find_iad(struct usb_device *dev,
+ struct usb_host_config *config,
+ u8 inum)
+{
+ struct usb_interface_assoc_descriptor *retval = NULL;
+ struct usb_interface_assoc_descriptor *intf_assoc;
+ int first_intf;
+ int last_intf;
+ int i;
+
+ for (i = 0; (i < USB_MAXIADS && config->intf_assoc[i]); i++) {
+ intf_assoc = config->intf_assoc[i];
+ if (intf_assoc->bInterfaceCount == 0)
+ continue;
+
+ first_intf = intf_assoc->bFirstInterface;
+ last_intf = first_intf + (intf_assoc->bInterfaceCount - 1);
+ if (inum >= first_intf && inum <= last_intf) {
+ if (!retval)
+ retval = intf_assoc;
+ else
+ dev_err(&dev->dev, "Interface #%d referenced"
+ " by multiple IADs\n", inum);
+ }
+ }
+
+ return retval;
+}
+
+
/*
* usb_set_configuration - Makes a particular device setting be current
* @dev: the device whose configuration is being updated
intfc = cp->intf_cache[i];
intf->altsetting = intfc->altsetting;
intf->num_altsetting = intfc->num_altsetting;
+ intf->intf_assoc = find_iad(dev, cp, i);
kref_get(&intfc->ref);
alt = usb_altnum_to_altsetting(intf, 0);