#define NUM_SUNZILOG num_sunzilog
#define NUM_CHANNELS (NUM_SUNZILOG * 2)
-#define KEYBOARD_LINE 0x2
-#define MOUSE_LINE 0x3
-
#define ZS_CLOCK 4915200 /* Zilog input clock rate. */
#define ZS_CLOCK_DIVISOR 16 /* Divisor this driver uses. */
}
static void sunzilog_kbdms_receive_chars(struct uart_sunzilog_port *up,
- unsigned char ch, int is_break,
- struct pt_regs *regs)
+ unsigned char ch, int is_break)
{
if (ZS_IS_KEYB(up)) {
/* Stop-A is handled by drivers/char/keyboard.c now. */
#ifdef CONFIG_SERIO
if (up->serio_open)
- serio_interrupt(&up->serio, ch, 0, regs);
+ serio_interrupt(&up->serio, ch, 0);
#endif
} else if (ZS_IS_MOUSE(up)) {
int ret = suncore_mouse_baud_detection(ch, is_break);
case 0:
#ifdef CONFIG_SERIO
if (up->serio_open)
- serio_interrupt(&up->serio, ch, 0, regs);
+ serio_interrupt(&up->serio, ch, 0);
#endif
break;
};
static struct tty_struct *
sunzilog_receive_chars(struct uart_sunzilog_port *up,
- struct zilog_channel __iomem *channel,
- struct pt_regs *regs)
+ struct zilog_channel __iomem *channel)
{
struct tty_struct *tty;
unsigned char ch, r1, flag;
ch &= up->parity_mask;
if (unlikely(ZS_IS_KEYB(up)) || unlikely(ZS_IS_MOUSE(up))) {
- sunzilog_kbdms_receive_chars(up, ch, 0, regs);
+ sunzilog_kbdms_receive_chars(up, ch, 0);
continue;
}
if (tty == NULL) {
- uart_handle_sysrq_char(&up->port, ch, regs);
+ uart_handle_sysrq_char(&up->port, ch);
continue;
}
else if (r1 & CRC_ERR)
flag = TTY_FRAME;
}
- if (uart_handle_sysrq_char(&up->port, ch, regs))
+ if (uart_handle_sysrq_char(&up->port, ch))
continue;
if (up->port.ignore_status_mask == 0xff ||
}
static void sunzilog_status_handle(struct uart_sunzilog_port *up,
- struct zilog_channel __iomem *channel,
- struct pt_regs *regs)
+ struct zilog_channel __iomem *channel)
{
unsigned char status;
if (status & BRK_ABRT) {
if (ZS_IS_MOUSE(up))
- sunzilog_kbdms_receive_chars(up, 0, 1, regs);
+ sunzilog_kbdms_receive_chars(up, 0, 1);
if (ZS_IS_CONS(up)) {
/* Wait for BREAK to deassert to avoid potentially
* confusing the PROM.
ZS_WSYNC(channel);
}
-static irqreturn_t sunzilog_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+static irqreturn_t sunzilog_interrupt(int irq, void *dev_id)
{
struct uart_sunzilog_port *up = dev_id;
ZS_WSYNC(channel);
if (r3 & CHARxIP)
- tty = sunzilog_receive_chars(up, channel, regs);
+ tty = sunzilog_receive_chars(up, channel);
if (r3 & CHAEXT)
- sunzilog_status_handle(up, channel, regs);
+ sunzilog_status_handle(up, channel);
if (r3 & CHATxIP)
sunzilog_transmit_chars(up, channel);
}
ZS_WSYNC(channel);
if (r3 & CHBRxIP)
- tty = sunzilog_receive_chars(up, channel, regs);
+ tty = sunzilog_receive_chars(up, channel);
if (r3 & CHBEXT)
- sunzilog_status_handle(up, channel, regs);
+ sunzilog_status_handle(up, channel);
if (r3 & CHBTxIP)
sunzilog_transmit_chars(up, channel);
}
/* The port lock is not held. */
static void
-sunzilog_set_termios(struct uart_port *port, struct termios *termios,
- struct termios *old)
+sunzilog_set_termios(struct uart_port *port, struct ktermios *termios,
+ struct ktermios *old)
{
struct uart_sunzilog_port *up = (struct uart_sunzilog_port *) port;
unsigned long flags;
static void sunzilog_putchar(struct uart_port *port, int ch)
{
- struct zilog_channel *channel = ZILOG_CHANNEL_FROM_PORT(port);
+ struct zilog_channel __iomem *channel = ZILOG_CHANNEL_FROM_PORT(port);
int loops = ZS_PUT_CHAR_MAX_DELAY;
/* This is a timed polling loop so do not switch the explicit
unsigned long flags;
int baud, brg;
+ if (up->port.type != PORT_SUNZILOG)
+ return -1;
+
printk(KERN_INFO "Console: ttyS%d (SunZilog zs%d)\n",
(sunzilog_reg.minor - 64) + con->index, con->index);
return 0;
}
-static struct console sunzilog_console = {
+static struct console sunzilog_console_ops = {
.name = "ttyS",
.write = sunzilog_console_write,
.device = uart_console_device,
if (i == NUM_CHANNELS)
return NULL;
- sunzilog_console.index = i;
+ sunzilog_console_ops.index = i;
sunzilog_port_table[i].flags |= SUNZILOG_FLAG_IS_CONS;
- return &sunzilog_console;
+ return &sunzilog_console_ops;
}
#else
{
int baud, brg;
- if (channel == KEYBOARD_LINE) {
- up->flags |= SUNZILOG_FLAG_CONS_KEYB;
+ if (up->flags & SUNZILOG_FLAG_CONS_KEYB) {
up->cflag = B1200 | CS8 | CLOCAL | CREAD;
baud = 1200;
} else {
- up->flags |= SUNZILOG_FLAG_CONS_MOUSE;
up->cflag = B4800 | CS8 | CLOCAL | CREAD;
baud = 4800;
}
}
#ifdef CONFIG_SERIO
-static void __init sunzilog_register_serio(struct uart_sunzilog_port *up, int channel)
+static void __init sunzilog_register_serio(struct uart_sunzilog_port *up)
{
struct serio *serio = &up->serio;
serio->port_data = up;
serio->id.type = SERIO_RS232;
- if (channel == KEYBOARD_LINE) {
+ if (up->flags & SUNZILOG_FLAG_CONS_KEYB) {
serio->id.proto = SERIO_SUNKBD;
strlcpy(serio->name, "zskbd", sizeof(serio->name));
} else {
strlcpy(serio->name, "zsms", sizeof(serio->name));
}
strlcpy(serio->phys,
- (channel == KEYBOARD_LINE ? "zs/serio0" : "zs/serio1"),
+ ((up->flags & SUNZILOG_FLAG_CONS_KEYB) ?
+ "zs/serio0" : "zs/serio1"),
sizeof(serio->phys));
serio->write = sunzilog_serio_write;
}
#endif
-static void __init sunzilog_init_hw(struct uart_sunzilog_port *up)
+static void __devinit sunzilog_init_hw(struct uart_sunzilog_port *up)
{
struct zilog_channel __iomem *channel;
unsigned long flags;
(void) read_zsreg(channel, R0);
}
- if (up->port.line == KEYBOARD_LINE ||
- up->port.line == MOUSE_LINE) {
+ if (up->flags & (SUNZILOG_FLAG_CONS_KEYB |
+ SUNZILOG_FLAG_CONS_MOUSE)) {
sunzilog_init_kbdms(up, up->port.line);
up->curregs[R9] |= (NV | MIE);
write_zsreg(channel, R9, up->curregs[R9]);
spin_unlock_irqrestore(&up->port.lock, flags);
#ifdef CONFIG_SERIO
- if (up->port.line == KEYBOARD_LINE || up->port.line == MOUSE_LINE)
- sunzilog_register_serio(up, up->port.line);
+ if (up->flags & (SUNZILOG_FLAG_CONS_KEYB |
+ SUNZILOG_FLAG_CONS_MOUSE))
+ sunzilog_register_serio(up);
#endif
}
-static int __devinit zs_get_instance(struct device_node *dp)
-{
- int ret;
-
- ret = of_getintprop_default(dp, "slave", -1);
- if (ret != -1)
- return ret;
-
- if (of_find_property(dp, "keyboard", NULL))
- ret = 1;
- else
- ret = 0;
-
- return ret;
-}
-
static int zilog_irq = -1;
static int __devinit zs_probe(struct of_device *op, const struct of_device_id *match)
{
+ static int inst;
struct uart_sunzilog_port *up;
struct zilog_layout __iomem *rp;
- int inst = zs_get_instance(op->node);
+ int keyboard_mouse;
int err;
+ keyboard_mouse = 0;
+ if (of_find_property(op->node, "keyboard", NULL))
+ keyboard_mouse = 1;
+
sunzilog_chip_regs[inst] = of_ioremap(&op->resource[0], 0,
sizeof(struct zilog_layout),
"zs");
rp = sunzilog_chip_regs[inst];
- if (zilog_irq == -1) {
+ if (zilog_irq == -1)
zilog_irq = op->irqs[0];
- err = request_irq(zilog_irq, sunzilog_interrupt, IRQF_SHARED,
- "zs", sunzilog_irq_chain);
- if (err) {
- of_iounmap(rp, sizeof(struct zilog_layout));
-
- return err;
- }
- }
up = &sunzilog_port_table[inst * 2];
up[0].port.line = (inst * 2) + 0;
up[0].port.dev = &op->dev;
up[0].flags |= SUNZILOG_FLAG_IS_CHANNEL_A;
- if (inst == 1)
+ if (keyboard_mouse)
up[0].flags |= SUNZILOG_FLAG_CONS_KEYB;
sunzilog_init_hw(&up[0]);
up[1].port.line = (inst * 2) + 1;
up[1].port.dev = &op->dev;
up[1].flags |= 0;
- if (inst == 1)
+ if (keyboard_mouse)
up[1].flags |= SUNZILOG_FLAG_CONS_MOUSE;
sunzilog_init_hw(&up[1]);
- if (inst != 1) {
+ if (!keyboard_mouse) {
err = uart_add_one_port(&sunzilog_reg, &up[0].port);
if (err) {
of_iounmap(rp, sizeof(struct zilog_layout));
of_iounmap(rp, sizeof(struct zilog_layout));
return err;
}
+ } else {
+ printk(KERN_INFO "%s: Keyboard at MMIO %lx (irq = %d) "
+ "is a zs\n",
+ op->dev.bus_id, up[0].port.mapbase, op->irqs[0]);
+ printk(KERN_INFO "%s: Mouse at MMIO %lx (irq = %d) "
+ "is a zs\n",
+ op->dev.bus_id, up[1].port.mapbase, op->irqs[0]);
}
dev_set_drvdata(&op->dev, &up[0]);
+ inst++;
+
return 0;
}
{
struct device_node *dp;
int err, uart_count;
+ int num_keybms;
NUM_SUNZILOG = 0;
- for_each_node_by_name(dp, "zs")
+ num_keybms = 0;
+ for_each_node_by_name(dp, "zs") {
NUM_SUNZILOG++;
+ if (of_find_property(dp, "keyboard", NULL))
+ num_keybms++;
+ }
uart_count = 0;
if (NUM_SUNZILOG) {
if (err)
goto out;
- /* Subtract 1 for keyboard, 1 for mouse. */
- uart_count = (NUM_SUNZILOG * 2) - 2;
+ uart_count = (NUM_SUNZILOG * 2) - (2 * num_keybms);
sunzilog_reg.nr = uart_count;
sunzilog_reg.minor = sunserial_current_minor;