-/* $Id: sh-sci.h,v 1.4 2004/02/19 16:43:56 lethal Exp $
- *
- * linux/drivers/serial/sh-sci.h
- *
- * SuperH on-chip serial module support. (SCI with no FIFO / with FIFO)
- * Copyright (C) 1999, 2000 Niibe Yutaka
- * Copyright (C) 2000 Greg Banks
- * Copyright (C) 2002, 2003 Paul Mundt
- * Modified to support multiple serial ports. Stuart Menefy (May 2000).
- * Modified to support SH7300(SH-Mobile) SCIF. Takashi Kusuda (Jun 2003).
- * Modified to support H8/300 Series Yoshinori Sato (Feb 2004).
- * Removed SH7300 support (Jul 2007).
- * Modified to support SH7720 SCIF. Markus Brunner, Mark Jonas (Aug 2007).
- */
#include <linux/serial_core.h>
#include <asm/io.h>
-
#include <asm/gpio.h>
#if defined(CONFIG_H83007) || defined(CONFIG_H83068)
# define SCSCR_INIT(port) 0x0038 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */
# define SCIF_ONLY
# define PORT_PSCR 0xA405011E
+#elif defined(CONFIG_CPU_SUBTYPE_SH7366)
+# define SCPDR0 0xA405013E /* 16 bit SCIF0 PSDR */
+# define SCSPTR0 SCPDR0
+# define SCIF_ORER 0x0001 /* overrun error bit */
+# define SCSCR_INIT(port) 0x0038 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */
+#elif defined(CONFIG_CPU_SUBTYPE_SH7723)
+# define SCSPTR0 0xa4050160
+# define SCSPTR1 0xa405013e
+# define SCSPTR2 0xa4050160
+# define SCSPTR3 0xa405013e
+# define SCSPTR4 0xa4050128
+# define SCSPTR5 0xa4050128
+# define SCIF_ORER 0x0001 /* overrun error bit */
+# define SCSCR_INIT(port) 0x0038 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */
+# define SCIF_ONLY
#elif defined(CONFIG_CPU_SUBTYPE_SH4_202)
# define SCSPTR2 0xffe80020 /* 16 bit SCIF */
# define SCIF_ORER 0x0001 /* overrun error bit */
# define SCSCR_INIT(port) 0x38 /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */
# define SCIF_ONLY
#elif defined(CONFIG_CPU_SUBTYPE_SH5_101) || defined(CONFIG_CPU_SUBTYPE_SH5_103)
-# include <asm/hardware.h>
# define SCIF_BASE_ADDR 0x01030000
# define SCIF_ADDR_SH5 PHYS_PERIPHERAL_BLOCK+SCIF_BASE_ADDR
# define SCIF_PTR2_OFFS 0x0000020
# define SCSCR_INIT(port) 0x30 /* TIE=0,RIE=0,TE=1,RE=1 */
# define SCI_ONLY
# define H8300_SCI_DR(ch) *(volatile char *)(P1DR + h8300_sci_pins[ch].port)
+#elif defined(CONFIG_CPU_SUBTYPE_SH7763)
+# define SCSPTR0 0xffe00024 /* 16 bit SCIF */
+# define SCSPTR1 0xffe08024 /* 16 bit SCIF */
+# define SCIF_ORER 0x0001 /* overrun error bit */
+# define SCSCR_INIT(port) 0x3a /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */
+# define SCIF_ONLY
#elif defined(CONFIG_CPU_SUBTYPE_SH7770)
# define SCSPTR0 0xff923020 /* 16 bit SCIF */
# define SCSPTR1 0xff924020 /* 16 bit SCIF */
h8_sci_offset, h8_sci_size) \
CPU_SCI_FNS(name, h8_sci_offset, h8_sci_size)
#define SCIF_FNS(name, sh3_scif_offset, sh3_scif_size, sh4_scif_offset, sh4_scif_size)
+#elif defined(CONFIG_CPU_SUBTYPE_SH7723)
+ #define SCIx_FNS(name, sh4_scifa_offset, sh4_scifa_size, sh4_scif_offset, sh4_scif_size) \
+ CPU_SCIx_FNS(name, sh4_scifa_offset, sh4_scifa_size, sh4_scif_offset, sh4_scif_size)
+ #define SCIF_FNS(name, sh4_scif_offset, sh4_scif_size) \
+ CPU_SCIF_FNS(name, sh4_scif_offset, sh4_scif_size)
#else
#define SCIx_FNS(name, sh3_sci_offset, sh3_sci_size, sh4_sci_offset, sh4_sci_size, \
sh3_scif_offset, sh3_scif_size, sh4_scif_offset, sh4_scif_size, \
SCIF_FNS(SCxTDR, 0x20, 8)
SCIF_FNS(SCxRDR, 0x24, 8)
SCIF_FNS(SCLSR, 0x24, 16)
+#elif defined(CONFIG_CPU_SUBTYPE_SH7723)
+SCIx_FNS(SCSMR, 0x00, 16, 0x00, 16)
+SCIx_FNS(SCBRR, 0x04, 8, 0x04, 8)
+SCIx_FNS(SCSCR, 0x08, 16, 0x08, 16)
+SCIx_FNS(SCxTDR, 0x20, 8, 0x0c, 8)
+SCIx_FNS(SCxSR, 0x14, 16, 0x10, 16)
+SCIx_FNS(SCxRDR, 0x24, 8, 0x14, 8)
+SCIF_FNS(SCTDSR, 0x0c, 8)
+SCIF_FNS(SCFER, 0x10, 16)
+SCIF_FNS(SCFCR, 0x18, 16)
+SCIF_FNS(SCFDR, 0x1c, 16)
+SCIF_FNS(SCLSR, 0x24, 16)
#else
/* reg SCI/SH3 SCI/SH4 SCIF/SH3 SCIF/SH4 SCI/H8*/
/* name off sz off sz off sz off sz off sz*/
SCIx_FNS(SCxRDR, 0x0a, 8, 0x14, 8, 0x0A, 8, 0x14, 8, 0x05, 8)
SCIF_FNS(SCFCR, 0x0c, 8, 0x18, 16)
#if defined(CONFIG_CPU_SUBTYPE_SH7760) || \
+ defined(CONFIG_CPU_SUBTYPE_SH7763) || \
defined(CONFIG_CPU_SUBTYPE_SH7780) || \
defined(CONFIG_CPU_SUBTYPE_SH7785)
SCIF_FNS(SCFDR, 0x0e, 16, 0x1C, 16)
return ctrl_inw(SCSPTR3) & 0x0001 ? 1 : 0; /* SCIF */
return 1;
}
-#elif defined(CONFIG_CPU_SUBTYPE_SH7722)
+#elif defined(CONFIG_CPU_SUBTYPE_SH7722) || defined(CONFIG_CPU_SUBTYPE_SH7366)
static inline int sci_rxd_in(struct uart_port *port)
{
if (port->mapbase == 0xffe00000)
return ctrl_inb(SCPDR0) & 0x0001 ? 1 : 0; /* SCIF0 */
return 1;
}
+#elif defined(CONFIG_CPU_SUBTYPE_SH7723)
+static inline int sci_rxd_in(struct uart_port *port)
+{
+ if (port->mapbase == 0xffe00000)
+ return ctrl_inb(SCSPTR0) & 0x0008 ? 1 : 0; /* SCIF0 */
+ if (port->mapbase == 0xffe10000)
+ return ctrl_inb(SCSPTR1) & 0x0020 ? 1 : 0; /* SCIF1 */
+ if (port->mapbase == 0xffe20000)
+ return ctrl_inb(SCSPTR2) & 0x0001 ? 1 : 0; /* SCIF2 */
+ if (port->mapbase == 0xa4e30000)
+ return ctrl_inb(SCSPTR3) & 0x0001 ? 1 : 0; /* SCIF3 */
+ if (port->mapbase == 0xa4e40000)
+ return ctrl_inb(SCSPTR4) & 0x0001 ? 1 : 0; /* SCIF4 */
+ if (port->mapbase == 0xa4e50000)
+ return ctrl_inb(SCSPTR5) & 0x0008 ? 1 : 0; /* SCIF5 */
+ return 1;
+}
#elif defined(CONFIG_CPU_SUBTYPE_SH5_101) || defined(CONFIG_CPU_SUBTYPE_SH5_103)
static inline int sci_rxd_in(struct uart_port *port)
{
int ch = (port->mapbase - SMR0) >> 3;
return (H8300_SCI_DR(ch) & h8300_sci_pins[ch].rx) ? 1 : 0;
}
+#elif defined(CONFIG_CPU_SUBTYPE_SH7763)
+static inline int sci_rxd_in(struct uart_port *port)
+{
+ if (port->mapbase == 0xffe00000)
+ return ctrl_inw(SCSPTR0) & 0x0001 ? 1 : 0; /* SCIF */
+ if (port->mapbase == 0xffe08000)
+ return ctrl_inw(SCSPTR1) & 0x0001 ? 1 : 0; /* SCIF */
+ return 1;
+}
#elif defined(CONFIG_CPU_SUBTYPE_SH7770)
static inline int sci_rxd_in(struct uart_port *port)
{
* -- Mitch Davis - 15 Jul 2000
*/
-#if defined(CONFIG_CPU_SUBTYPE_SH7780) || \
+#if defined(CONFIG_CPU_SUBTYPE_SH7763) || \
+ defined(CONFIG_CPU_SUBTYPE_SH7780) || \
defined(CONFIG_CPU_SUBTYPE_SH7785)
#define SCBRR_VALUE(bps, clk) ((clk+16*bps)/(16*bps)-1)
#elif defined(CONFIG_CPU_SUBTYPE_SH7705) || \
defined(CONFIG_CPU_SUBTYPE_SH7720) || \
defined(CONFIG_CPU_SUBTYPE_SH7721)
#define SCBRR_VALUE(bps, clk) (((clk*2)+16*bps)/(32*bps)-1)
+#elif defined(CONFIG_CPU_SUBTYPE_SH7723)
+#define SCBRR_VALUE(bps, clk) (((clk*2)+16*bps)/(16*bps)-1)
#elif defined(__H8300H__) || defined(__H8300S__)
#define SCBRR_VALUE(bps) (((CONFIG_CPU_CLOCK*1000/32)/bps)-1)
#elif defined(CONFIG_SUPERH64)