Merge gregkh@master.kernel.org:/pub/scm/linux/kernel/git/gregkh/driver-2.6

[linux-2.6] / drivers / serial / pxa.c

diff --git a/drivers/serial/pxa.c b/drivers/serial/pxa.c
index 51d8a49f4477bb6f23048b361e4ad367ecdb9758..eaa0af8352907da7f6ea4f18a8d9df7f7c096edb 100644 (file)
--- a/drivers/serial/pxa.c
+++ b/drivers/serial/pxa.c
@@ -80,7 +80,7 @@ static void serial_pxa_enable_ms(struct uart_port *port)
        serial_out(up, UART_IER, up->ier);
 }
 
-static void serial_pxa_stop_tx(struct uart_port *port, unsigned int tty_stop)
+static void serial_pxa_stop_tx(struct uart_port *port)
 {
        struct uart_pxa_port *up = (struct uart_pxa_port *)port;
 
@@ -161,20 +161,12 @@ receive_chars(struct uart_pxa_port *up, int *status, struct pt_regs *regs)
                        else if (*status & UART_LSR_FE)
                                flag = TTY_FRAME;
                }
+
                if (uart_handle_sysrq_char(&up->port, ch, regs))
                        goto ignore_char;
-               if ((*status & up->port.ignore_status_mask) == 0) {
-                       tty_insert_flip_char(tty, ch, flag);
-               }
-               if ((*status & UART_LSR_OE) &&
-                   tty->flip.count < TTY_FLIPBUF_SIZE) {
-                       /*
-                        * Overrun is special, since it's reported
-                        * immediately, and doesn't affect the current
-                        * character.
-                        */
-                       tty_insert_flip_char(tty, 0, TTY_OVERRUN);
-               }
+
+               uart_insert_char(&up->port, *status, UART_LSR_OE, ch, flag);
+
        ignore_char:
                *status = serial_in(up, UART_LSR);
        } while ((*status & UART_LSR_DR) && (max_count-- > 0));
@@ -193,7 +185,7 @@ static void transmit_chars(struct uart_pxa_port *up)
                return;
        }
        if (uart_circ_empty(xmit) || uart_tx_stopped(&up->port)) {
-               serial_pxa_stop_tx(&up->port, 0);
+               serial_pxa_stop_tx(&up->port);
                return;
        }
 
@@ -211,10 +203,10 @@ static void transmit_chars(struct uart_pxa_port *up)
 
 
        if (uart_circ_empty(xmit))
-               serial_pxa_stop_tx(&up->port, 0);
+               serial_pxa_stop_tx(&up->port);
 }
 
-static void serial_pxa_start_tx(struct uart_port *port, unsigned int tty_start)
+static void serial_pxa_start_tx(struct uart_port *port)
 {
        struct uart_pxa_port *up = (struct uart_pxa_port *)port;
 
@@ -282,14 +274,11 @@ static unsigned int serial_pxa_tx_empty(struct uart_port *port)
 static unsigned int serial_pxa_get_mctrl(struct uart_port *port)
 {
        struct uart_pxa_port *up = (struct uart_pxa_port *)port;
-       unsigned long flags;
        unsigned char status;
        unsigned int ret;
 
 return TIOCM_CTS | TIOCM_DSR | TIOCM_CAR;
-       spin_lock_irqsave(&up->port.lock, flags);
        status = serial_in(up, UART_MSR);
-       spin_unlock_irqrestore(&up->port.lock, flags);
 
        ret = 0;
        if (status & UART_MSR_DCD)
@@ -463,22 +452,22 @@ serial_pxa_set_termios(struct uart_port *port, struct termios *termios,
 
        switch (termios->c_cflag & CSIZE) {
        case CS5:
-               cval = 0x00;
+               cval = UART_LCR_WLEN5;
                break;
        case CS6:
-               cval = 0x01;
+               cval = UART_LCR_WLEN6;
                break;
        case CS7:
-               cval = 0x02;
+               cval = UART_LCR_WLEN7;
                break;
        default:
        case CS8:
-               cval = 0x03;
+               cval = UART_LCR_WLEN8;
                break;
        }
 
        if (termios->c_cflag & CSTOPB)
-               cval |= 0x04;
+               cval |= UART_LCR_STOP;
        if (termios->c_cflag & PARENB)
                cval |= UART_LCR_PARITY;
        if (!(termios->c_cflag & PARODD))