*
* Email: olivier.lebaillif@ifrsys.com
*
- * Copyright (C) 2004, 2006 Maciej W. Rozycki
+ * Copyright (C) 2004, 2006, 2007 Maciej W. Rozycki
*
* [31-AUG-98] triemer
* Changed IRQ to use Harald's dec internals interrupts.h
#define SUPPORT_SYSRQ
#endif
+#include <linux/bitops.h>
+#include <linux/compiler.h>
+#include <linux/console.h>
#include <linux/delay.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
+#include <linux/errno.h>
#include <linux/init.h>
-#include <linux/console.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/kernel.h>
+#include <linux/major.h>
+#include <linux/module.h>
+#include <linux/serial.h>
+#include <linux/serial_core.h>
#include <linux/sysrq.h>
#include <linux/tty.h>
-#include <linux/tty_flip.h>
-#include <linux/serial_core.h>
-#include <linux/serial.h>
+#include <asm/atomic.h>
#include <asm/bootinfo.h>
+#include <asm/io.h>
+#include <asm/system.h>
+
#include <asm/dec/interrupts.h>
#include <asm/dec/kn01.h>
#include <asm/dec/kn02.h>
#include <asm/dec/machtype.h>
#include <asm/dec/prom.h>
-#include <asm/irq.h>
-#include <asm/system.h>
-#include <asm/uaccess.h>
+#include <asm/dec/system.h>
#include "dz.h"
-static char *dz_name = "DECstation DZ serial driver version ";
-static char *dz_version = "1.03";
+
+MODULE_DESCRIPTION("DECstation DZ serial driver");
+MODULE_LICENSE("GPL");
+
+
+static char dz_name[] __initdata = "DECstation DZ serial driver version ";
+static char dz_version[] __initdata = "1.04";
struct dz_port {
+ struct dz_mux *mux;
struct uart_port port;
unsigned int cflag;
};
-static struct dz_port dz_ports[DZ_NB_PORT];
+struct dz_mux {
+ struct dz_port dport[DZ_NB_PORT];
+ atomic_t map_guard;
+ atomic_t irq_guard;
+ int initialised;
+};
+
+static struct dz_mux dz_mux;
+
+static inline struct dz_port *to_dport(struct uart_port *uport)
+{
+ return container_of(uport, struct dz_port, port);
+}
/*
* ------------------------------------------------------------
* ------------------------------------------------------------
*/
-static inline unsigned short dz_in(struct dz_port *dport, unsigned offset)
+static u16 dz_in(struct dz_port *dport, unsigned offset)
{
- volatile unsigned short *addr =
- (volatile unsigned short *) (dport->port.membase + offset);
+ void __iomem *addr = dport->port.membase + offset;
- return *addr;
+ return readw(addr);
}
-static inline void dz_out(struct dz_port *dport, unsigned offset,
- unsigned short value)
+static void dz_out(struct dz_port *dport, unsigned offset, u16 value)
{
- volatile unsigned short *addr =
- (volatile unsigned short *) (dport->port.membase + offset);
+ void __iomem *addr = dport->port.membase + offset;
- *addr = value;
+ writew(value, addr);
}
/*
static void dz_stop_tx(struct uart_port *uport)
{
- struct dz_port *dport = (struct dz_port *)uport;
- unsigned short tmp, mask = 1 << dport->port.line;
- unsigned long flags;
+ struct dz_port *dport = to_dport(uport);
+ u16 tmp, mask = 1 << dport->port.line;
- spin_lock_irqsave(&dport->port.lock, flags);
tmp = dz_in(dport, DZ_TCR); /* read the TX flag */
tmp &= ~mask; /* clear the TX flag */
dz_out(dport, DZ_TCR, tmp);
- spin_unlock_irqrestore(&dport->port.lock, flags);
}
static void dz_start_tx(struct uart_port *uport)
{
- struct dz_port *dport = (struct dz_port *)uport;
- unsigned short tmp, mask = 1 << dport->port.line;
- unsigned long flags;
+ struct dz_port *dport = to_dport(uport);
+ u16 tmp, mask = 1 << dport->port.line;
- spin_lock_irqsave(&dport->port.lock, flags);
tmp = dz_in(dport, DZ_TCR); /* read the TX flag */
tmp |= mask; /* set the TX flag */
dz_out(dport, DZ_TCR, tmp);
- spin_unlock_irqrestore(&dport->port.lock, flags);
}
static void dz_stop_rx(struct uart_port *uport)
{
- struct dz_port *dport = (struct dz_port *)uport;
- unsigned long flags;
+ struct dz_port *dport = to_dport(uport);
- spin_lock_irqsave(&dport->port.lock, flags);
- dport->cflag &= ~DZ_CREAD;
- dz_out(dport, DZ_LPR, dport->cflag | dport->port.line);
- spin_unlock_irqrestore(&dport->port.lock, flags);
+ dport->cflag &= ~DZ_RXENAB;
+ dz_out(dport, DZ_LPR, dport->cflag);
}
-static void dz_enable_ms(struct uart_port *port)
+static void dz_enable_ms(struct uart_port *uport)
{
/* nothing to do */
}
* This routine deals with inputs from any lines.
* ------------------------------------------------------------
*/
-static inline void dz_receive_chars(struct dz_port *dport_in)
+static inline void dz_receive_chars(struct dz_mux *mux)
{
- struct dz_port *dport;
+ struct uart_port *uport;
+ struct dz_port *dport = &mux->dport[0];
struct tty_struct *tty = NULL;
struct uart_icount *icount;
int lines_rx[DZ_NB_PORT] = { [0 ... DZ_NB_PORT - 1] = 0 };
- unsigned short status;
unsigned char ch, flag;
+ u16 status;
int i;
- while ((status = dz_in(dport_in, DZ_RBUF)) & DZ_DVAL) {
- dport = &dz_ports[LINE(status)];
- tty = dport->port.info->tty; /* point to the proper dev */
+ while ((status = dz_in(dport, DZ_RBUF)) & DZ_DVAL) {
+ dport = &mux->dport[LINE(status)];
+ uport = &dport->port;
+ tty = uport->info->port.tty; /* point to the proper dev */
ch = UCHAR(status); /* grab the char */
+ flag = TTY_NORMAL;
- icount = &dport->port.icount;
+ icount = &uport->icount;
icount->rx++;
- flag = TTY_NORMAL;
- if (status & DZ_FERR) { /* frame error */
+ if (unlikely(status & (DZ_OERR | DZ_FERR | DZ_PERR))) {
+
/*
- * There is no separate BREAK status bit, so
- * treat framing errors as BREAKs for Magic SysRq
- * and SAK; normally, otherwise.
+ * There is no separate BREAK status bit, so treat
+ * null characters with framing errors as BREAKs;
+ * normally, otherwise. For this move the Framing
+ * Error bit to a simulated BREAK bit.
*/
- if (uart_handle_break(&dport->port))
- continue;
- if (dport->port.flags & UPF_SAK)
+ if (!ch) {
+ status |= (status & DZ_FERR) >>
+ (ffs(DZ_FERR) - ffs(DZ_BREAK));
+ status &= ~DZ_FERR;
+ }
+
+ /* Handle SysRq/SAK & keep track of the statistics. */
+ if (status & DZ_BREAK) {
+ icount->brk++;
+ if (uart_handle_break(uport))
+ continue;
+ } else if (status & DZ_FERR)
+ icount->frame++;
+ else if (status & DZ_PERR)
+ icount->parity++;
+ if (status & DZ_OERR)
+ icount->overrun++;
+
+ status &= uport->read_status_mask;
+ if (status & DZ_BREAK)
flag = TTY_BREAK;
- else
+ else if (status & DZ_FERR)
flag = TTY_FRAME;
- } else if (status & DZ_OERR) /* overrun error */
- flag = TTY_OVERRUN;
- else if (status & DZ_PERR) /* parity error */
- flag = TTY_PARITY;
-
- /* keep track of the statistics */
- switch (flag) {
- case TTY_FRAME:
- icount->frame++;
- break;
- case TTY_PARITY:
- icount->parity++;
- break;
- case TTY_OVERRUN:
- icount->overrun++;
- break;
- case TTY_BREAK:
- icount->brk++;
- break;
- default:
- break;
+ else if (status & DZ_PERR)
+ flag = TTY_PARITY;
+
}
- if (uart_handle_sysrq_char(&dport->port, ch))
+ if (uart_handle_sysrq_char(uport, ch))
continue;
- if ((status & dport->port.ignore_status_mask) == 0) {
- uart_insert_char(&dport->port,
- status, DZ_OERR, ch, flag);
- lines_rx[LINE(status)] = 1;
- }
+ uart_insert_char(uport, status, DZ_OERR, ch, flag);
+ lines_rx[LINE(status)] = 1;
}
for (i = 0; i < DZ_NB_PORT; i++)
if (lines_rx[i])
- tty_flip_buffer_push(dz_ports[i].port.info->tty);
+ tty_flip_buffer_push(mux->dport[i].port.info->port.tty);
}
/*
* This routine deals with outputs to any lines.
* ------------------------------------------------------------
*/
-static inline void dz_transmit_chars(struct dz_port *dport_in)
+static inline void dz_transmit_chars(struct dz_mux *mux)
{
- struct dz_port *dport;
+ struct dz_port *dport = &mux->dport[0];
struct circ_buf *xmit;
- unsigned short status;
unsigned char tmp;
+ u16 status;
- status = dz_in(dport_in, DZ_CSR);
- dport = &dz_ports[LINE(status)];
+ status = dz_in(dport, DZ_CSR);
+ dport = &mux->dport[LINE(status)];
xmit = &dport->port.info->xmit;
if (dport->port.x_char) { /* XON/XOFF chars */
}
/* If nothing to do or stopped or hardware stopped. */
if (uart_circ_empty(xmit) || uart_tx_stopped(&dport->port)) {
+ spin_lock(&dport->port.lock);
dz_stop_tx(&dport->port);
+ spin_unlock(&dport->port.lock);
return;
}
uart_write_wakeup(&dport->port);
/* Are we are done. */
- if (uart_circ_empty(xmit))
+ if (uart_circ_empty(xmit)) {
+ spin_lock(&dport->port.lock);
dz_stop_tx(&dport->port);
+ spin_unlock(&dport->port.lock);
+ }
}
/*
* 1. No status change interrupt; use a timer.
* 2. Handle the 3100/5000 as appropriate. --macro
*/
- unsigned short status;
+ u16 status;
/* If not the modem line just return. */
if (dport->port.line != DZ_MODEM)
* It deals with the multiple ports.
* ------------------------------------------------------------
*/
-static irqreturn_t dz_interrupt(int irq, void *dev)
+static irqreturn_t dz_interrupt(int irq, void *dev_id)
{
- struct dz_port *dport = dev;
- unsigned short status;
+ struct dz_mux *mux = dev_id;
+ struct dz_port *dport = &mux->dport[0];
+ u16 status;
/* get the reason why we just got an irq */
status = dz_in(dport, DZ_CSR);
if ((status & (DZ_RDONE | DZ_RIE)) == (DZ_RDONE | DZ_RIE))
- dz_receive_chars(dport);
+ dz_receive_chars(mux);
if ((status & (DZ_TRDY | DZ_TIE)) == (DZ_TRDY | DZ_TIE))
- dz_transmit_chars(dport);
+ dz_transmit_chars(mux);
return IRQ_HANDLED;
}
/*
* FIXME: Handle the 3100/5000 as appropriate. --macro
*/
- struct dz_port *dport = (struct dz_port *)uport;
+ struct dz_port *dport = to_dport(uport);
unsigned int mctrl = TIOCM_CAR | TIOCM_DSR | TIOCM_CTS;
if (dport->port.line == DZ_MODEM) {
/*
* FIXME: Handle the 3100/5000 as appropriate. --macro
*/
- struct dz_port *dport = (struct dz_port *)uport;
- unsigned short tmp;
+ struct dz_port *dport = to_dport(uport);
+ u16 tmp;
if (dport->port.line == DZ_MODEM) {
tmp = dz_in(dport, DZ_TCR);
*/
static int dz_startup(struct uart_port *uport)
{
- struct dz_port *dport = (struct dz_port *)uport;
+ struct dz_port *dport = to_dport(uport);
+ struct dz_mux *mux = dport->mux;
unsigned long flags;
- unsigned short tmp;
+ int irq_guard;
+ int ret;
+ u16 tmp;
+
+ irq_guard = atomic_add_return(1, &mux->irq_guard);
+ if (irq_guard != 1)
+ return 0;
+
+ ret = request_irq(dport->port.irq, dz_interrupt,
+ IRQF_SHARED, "dz", mux);
+ if (ret) {
+ atomic_add(-1, &mux->irq_guard);
+ printk(KERN_ERR "dz: Cannot get IRQ %d!\n", dport->port.irq);
+ return ret;
+ }
spin_lock_irqsave(&dport->port.lock, flags);
- /* enable the interrupt and the scanning */
+ /* Enable interrupts. */
tmp = dz_in(dport, DZ_CSR);
- tmp |= DZ_RIE | DZ_TIE | DZ_MSE;
+ tmp |= DZ_RIE | DZ_TIE;
dz_out(dport, DZ_CSR, tmp);
spin_unlock_irqrestore(&dport->port.lock, flags);
*/
static void dz_shutdown(struct uart_port *uport)
{
- dz_stop_tx(uport);
+ struct dz_port *dport = to_dport(uport);
+ struct dz_mux *mux = dport->mux;
+ unsigned long flags;
+ int irq_guard;
+ u16 tmp;
+
+ spin_lock_irqsave(&dport->port.lock, flags);
+ dz_stop_tx(&dport->port);
+ spin_unlock_irqrestore(&dport->port.lock, flags);
+
+ irq_guard = atomic_add_return(-1, &mux->irq_guard);
+ if (!irq_guard) {
+ /* Disable interrupts. */
+ tmp = dz_in(dport, DZ_CSR);
+ tmp &= ~(DZ_RIE | DZ_TIE);
+ dz_out(dport, DZ_CSR, tmp);
+
+ free_irq(dport->port.irq, mux);
+ }
}
/*
*/
static unsigned int dz_tx_empty(struct uart_port *uport)
{
- struct dz_port *dport = (struct dz_port *)uport;
+ struct dz_port *dport = to_dport(uport);
unsigned short tmp, mask = 1 << dport->port.line;
tmp = dz_in(dport, DZ_TCR);
* FIXME: Can't access BREAK bits in TDR easily;
* reuse the code for polled TX. --macro
*/
- struct dz_port *dport = (struct dz_port *)uport;
+ struct dz_port *dport = to_dport(uport);
unsigned long flags;
unsigned short tmp, mask = 1 << dport->port.line;
spin_unlock_irqrestore(&uport->lock, flags);
}
+static int dz_encode_baud_rate(unsigned int baud)
+{
+ switch (baud) {
+ case 50:
+ return DZ_B50;
+ case 75:
+ return DZ_B75;
+ case 110:
+ return DZ_B110;
+ case 134:
+ return DZ_B134;
+ case 150:
+ return DZ_B150;
+ case 300:
+ return DZ_B300;
+ case 600:
+ return DZ_B600;
+ case 1200:
+ return DZ_B1200;
+ case 1800:
+ return DZ_B1800;
+ case 2000:
+ return DZ_B2000;
+ case 2400:
+ return DZ_B2400;
+ case 3600:
+ return DZ_B3600;
+ case 4800:
+ return DZ_B4800;
+ case 7200:
+ return DZ_B7200;
+ case 9600:
+ return DZ_B9600;
+ default:
+ return -1;
+ }
+}
+
+
+static void dz_reset(struct dz_port *dport)
+{
+ struct dz_mux *mux = dport->mux;
+
+ if (mux->initialised)
+ return;
+
+ dz_out(dport, DZ_CSR, DZ_CLR);
+ while (dz_in(dport, DZ_CSR) & DZ_CLR);
+ iob();
+
+ /* Enable scanning. */
+ dz_out(dport, DZ_CSR, DZ_MSE);
+
+ mux->initialised = 1;
+}
+
static void dz_set_termios(struct uart_port *uport, struct ktermios *termios,
struct ktermios *old_termios)
{
- struct dz_port *dport = (struct dz_port *)uport;
+ struct dz_port *dport = to_dport(uport);
unsigned long flags;
unsigned int cflag, baud;
+ int bflag;
cflag = dport->port.line;
cflag |= DZ_PARODD;
baud = uart_get_baud_rate(uport, termios, old_termios, 50, 9600);
- switch (baud) {
- case 50:
- cflag |= DZ_B50;
- break;
- case 75:
- cflag |= DZ_B75;
- break;
- case 110:
- cflag |= DZ_B110;
- break;
- case 134:
- cflag |= DZ_B134;
- break;
- case 150:
- cflag |= DZ_B150;
- break;
- case 300:
- cflag |= DZ_B300;
- break;
- case 600:
- cflag |= DZ_B600;
- break;
- case 1200:
- cflag |= DZ_B1200;
- break;
- case 1800:
- cflag |= DZ_B1800;
- break;
- case 2000:
- cflag |= DZ_B2000;
- break;
- case 2400:
- cflag |= DZ_B2400;
- break;
- case 3600:
- cflag |= DZ_B3600;
- break;
- case 4800:
- cflag |= DZ_B4800;
- break;
- case 7200:
- cflag |= DZ_B7200;
- break;
- case 9600:
- default:
- cflag |= DZ_B9600;
+ bflag = dz_encode_baud_rate(baud);
+ if (bflag < 0) { /* Try to keep unchanged. */
+ baud = uart_get_baud_rate(uport, old_termios, NULL, 50, 9600);
+ bflag = dz_encode_baud_rate(baud);
+ if (bflag < 0) { /* Resort to 9600. */
+ baud = 9600;
+ bflag = DZ_B9600;
+ }
+ tty_termios_encode_baud_rate(termios, baud, baud);
}
+ cflag |= bflag;
if (termios->c_cflag & CREAD)
cflag |= DZ_RXENAB;
spin_lock_irqsave(&dport->port.lock, flags);
- dz_out(dport, DZ_LPR, cflag | dport->port.line);
+ uart_update_timeout(uport, termios->c_cflag, baud);
+
+ dz_out(dport, DZ_LPR, cflag);
dport->cflag = cflag;
/* setup accept flag */
dport->port.read_status_mask = DZ_OERR;
if (termios->c_iflag & INPCK)
dport->port.read_status_mask |= DZ_FERR | DZ_PERR;
+ if (termios->c_iflag & (BRKINT | PARMRK))
+ dport->port.read_status_mask |= DZ_BREAK;
/* characters to ignore */
uport->ignore_status_mask = 0;
+ if ((termios->c_iflag & (IGNPAR | IGNBRK)) == (IGNPAR | IGNBRK))
+ dport->port.ignore_status_mask |= DZ_OERR;
if (termios->c_iflag & IGNPAR)
dport->port.ignore_status_mask |= DZ_FERR | DZ_PERR;
+ if (termios->c_iflag & IGNBRK)
+ dport->port.ignore_status_mask |= DZ_BREAK;
spin_unlock_irqrestore(&dport->port.lock, flags);
}
-static const char *dz_type(struct uart_port *port)
+static const char *dz_type(struct uart_port *uport)
{
return "DZ";
}
-static void dz_release_port(struct uart_port *port)
+static void dz_release_port(struct uart_port *uport)
{
- /* nothing to do */
+ struct dz_mux *mux = to_dport(uport)->mux;
+ int map_guard;
+
+ iounmap(uport->membase);
+ uport->membase = NULL;
+
+ map_guard = atomic_add_return(-1, &mux->map_guard);
+ if (!map_guard)
+ release_mem_region(uport->mapbase, dec_kn_slot_size);
}
-static int dz_request_port(struct uart_port *port)
+static int dz_map_port(struct uart_port *uport)
{
+ if (!uport->membase)
+ uport->membase = ioremap_nocache(uport->mapbase,
+ dec_kn_slot_size);
+ if (!uport->membase) {
+ printk(KERN_ERR "dz: Cannot map MMIO\n");
+ return -ENOMEM;
+ }
return 0;
}
-static void dz_config_port(struct uart_port *port, int flags)
+static int dz_request_port(struct uart_port *uport)
{
- if (flags & UART_CONFIG_TYPE)
- port->type = PORT_DZ;
+ struct dz_mux *mux = to_dport(uport)->mux;
+ int map_guard;
+ int ret;
+
+ map_guard = atomic_add_return(1, &mux->map_guard);
+ if (map_guard == 1) {
+ if (!request_mem_region(uport->mapbase, dec_kn_slot_size,
+ "dz")) {
+ atomic_add(-1, &mux->map_guard);
+ printk(KERN_ERR
+ "dz: Unable to reserve MMIO resource\n");
+ return -EBUSY;
+ }
+ }
+ ret = dz_map_port(uport);
+ if (ret) {
+ map_guard = atomic_add_return(-1, &mux->map_guard);
+ if (!map_guard)
+ release_mem_region(uport->mapbase, dec_kn_slot_size);
+ return ret;
+ }
+ return 0;
+}
+
+static void dz_config_port(struct uart_port *uport, int flags)
+{
+ struct dz_port *dport = to_dport(uport);
+
+ if (flags & UART_CONFIG_TYPE) {
+ if (dz_request_port(uport))
+ return;
+
+ uport->type = PORT_DZ;
+
+ dz_reset(dport);
+ }
}
/*
- * verify the new serial_struct (for TIOCSSERIAL).
+ * Verify the new serial_struct (for TIOCSSERIAL).
*/
-static int dz_verify_port(struct uart_port *port, struct serial_struct *ser)
+static int dz_verify_port(struct uart_port *uport, struct serial_struct *ser)
{
int ret = 0;
+
if (ser->type != PORT_UNKNOWN && ser->type != PORT_DZ)
ret = -EINVAL;
- if (ser->irq != port->irq)
+ if (ser->irq != uport->irq)
ret = -EINVAL;
return ret;
}
static void __init dz_init_ports(void)
{
static int first = 1;
- struct dz_port *dport;
unsigned long base;
- int i;
+ int line;
if (!first)
return;
first = 0;
- if (mips_machtype == MACH_DS23100 ||
- mips_machtype == MACH_DS5100)
- base = CKSEG1ADDR(KN01_SLOT_BASE + KN01_DZ11);
+ if (mips_machtype == MACH_DS23100 || mips_machtype == MACH_DS5100)
+ base = dec_kn_slot_base + KN01_DZ11;
else
- base = CKSEG1ADDR(KN02_SLOT_BASE + KN02_DZ11);
-
- for (i = 0, dport = dz_ports; i < DZ_NB_PORT; i++, dport++) {
- spin_lock_init(&dport->port.lock);
- dport->port.membase = (char *) base;
- dport->port.iotype = UPIO_MEM;
- dport->port.irq = dec_interrupt[DEC_IRQ_DZ11];
- dport->port.line = i;
- dport->port.fifosize = 1;
- dport->port.ops = &dz_ops;
- dport->port.flags = UPF_BOOT_AUTOCONF;
- }
-}
+ base = dec_kn_slot_base + KN02_DZ11;
-static void dz_reset(struct dz_port *dport)
-{
- dz_out(dport, DZ_CSR, DZ_CLR);
- while (dz_in(dport, DZ_CSR) & DZ_CLR);
- iob();
+ for (line = 0; line < DZ_NB_PORT; line++) {
+ struct dz_port *dport = &dz_mux.dport[line];
+ struct uart_port *uport = &dport->port;
- /* enable scanning */
- dz_out(dport, DZ_CSR, DZ_MSE);
+ dport->mux = &dz_mux;
+
+ uport->irq = dec_interrupt[DEC_IRQ_DZ11];
+ uport->fifosize = 1;
+ uport->iotype = UPIO_MEM;
+ uport->flags = UPF_BOOT_AUTOCONF;
+ uport->ops = &dz_ops;
+ uport->line = line;
+ uport->mapbase = base;
+ }
}
#ifdef CONFIG_SERIAL_DZ_CONSOLE
*/
static void dz_console_putchar(struct uart_port *uport, int ch)
{
- struct dz_port *dport = (struct dz_port *)uport;
+ struct dz_port *dport = to_dport(uport);
unsigned long flags;
unsigned short csr, tcr, trdy, mask;
int loops = 10000;
dz_out(dport, DZ_TCR, mask);
iob();
udelay(2);
- } while (loops--);
+ } while (--loops);
if (loops) /* Cannot send otherwise. */
dz_out(dport, DZ_TDR, ch);
const char *str,
unsigned int count)
{
- struct dz_port *dport = &dz_ports[co->index];
+ struct dz_port *dport = &dz_mux.dport[co->index];
#ifdef DEBUG_DZ
prom_printf((char *) str);
#endif
static int __init dz_console_setup(struct console *co, char *options)
{
- struct dz_port *dport = &dz_ports[co->index];
+ struct dz_port *dport = &dz_mux.dport[co->index];
+ struct uart_port *uport = &dport->port;
int baud = 9600;
int bits = 8;
int parity = 'n';
int flow = 'n';
+ int ret;
- if (options)
- uart_parse_options(options, &baud, &parity, &bits, &flow);
+ ret = dz_map_port(uport);
+ if (ret)
+ return ret;
dz_reset(dport);
+ if (options)
+ uart_parse_options(options, &baud, &parity, &bits, &flow);
+
return uart_set_options(&dport->port, co, baud, parity, bits, flow);
}
static struct uart_driver dz_reg;
-static struct console dz_sercons = {
+static struct console dz_console = {
.name = "ttyS",
.write = dz_console_print,
.device = uart_console_device,
{
if (!IOASIC) {
dz_init_ports();
- register_console(&dz_sercons);
+ register_console(&dz_console);
return 0;
} else
return -ENXIO;
console_initcall(dz_serial_console_init);
-#define SERIAL_DZ_CONSOLE &dz_sercons
+#define SERIAL_DZ_CONSOLE &dz_console
#else
#define SERIAL_DZ_CONSOLE NULL
#endif /* CONFIG_SERIAL_DZ_CONSOLE */
dz_init_ports();
-#ifndef CONFIG_SERIAL_DZ_CONSOLE
- /* reset the chip */
- dz_reset(&dz_ports[0]);
-#endif
-
- if (request_irq(dz_ports[0].port.irq, dz_interrupt,
- IRQF_DISABLED, "DZ", &dz_ports[0]))
- panic("Unable to register DZ interrupt");
-
ret = uart_register_driver(&dz_reg);
- if (ret != 0)
+ if (ret)
return ret;
for (i = 0; i < DZ_NB_PORT; i++)
- uart_add_one_port(&dz_reg, &dz_ports[i].port);
+ uart_add_one_port(&dz_reg, &dz_mux.dport[i].port);
- return ret;
+ return 0;
}
module_init(dz_init);
-
-MODULE_DESCRIPTION("DECstation DZ serial driver");
-MODULE_LICENSE("GPL");