* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
+#include <linux/config.h>
#include <linux/ctype.h>
#include <linux/init.h>
#include <linux/module.h>
#include "scsi_priv.h"
#include <scsi/scsi_device.h>
#include <scsi/scsi_host.h>
-#include <scsi/scsi_request.h>
+#include <scsi/scsi_cmnd.h>
#include <scsi/scsi_eh.h>
#include <scsi/scsi_transport.h>
#include <scsi/scsi_transport_spi.h>
-#define SPI_PRINTK(x, l, f, a...) dev_printk(l, &(x)->dev, f , ##a)
-
#define SPI_NUM_ATTRS 14 /* increase this if you add attributes */
#define SPI_OTHER_ATTRS 1 /* Increase this if you add "always
* on" attributes */
return result;
}
-/* Modification of scsi_wait_req that will clear UNIT ATTENTION conditions
- * resulting from (likely) bus and device resets */
-static void spi_wait_req(struct scsi_request *sreq, const void *cmd,
- void *buffer, unsigned bufflen)
+static int spi_execute(struct scsi_device *sdev, const void *cmd,
+ enum dma_data_direction dir,
+ void *buffer, unsigned bufflen,
+ struct scsi_sense_hdr *sshdr)
{
- int i;
+ int i, result;
+ unsigned char sense[SCSI_SENSE_BUFFERSIZE];
for(i = 0; i < DV_RETRIES; i++) {
- sreq->sr_request->flags |= REQ_FAILFAST;
-
- scsi_wait_req(sreq, cmd, buffer, bufflen,
- DV_TIMEOUT, /* retries */ 1);
- if (sreq->sr_result & DRIVER_SENSE) {
- struct scsi_sense_hdr sshdr;
-
- if (scsi_request_normalize_sense(sreq, &sshdr)
- && sshdr.sense_key == UNIT_ATTENTION)
+ result = scsi_execute(sdev, cmd, dir, buffer, bufflen,
+ sense, DV_TIMEOUT, /* retries */ 1,
+ REQ_FAILFAST);
+ if (result & DRIVER_SENSE) {
+ struct scsi_sense_hdr sshdr_tmp;
+ if (!sshdr)
+ sshdr = &sshdr_tmp;
+
+ if (scsi_normalize_sense(sense, sizeof(*sense),
+ sshdr)
+ && sshdr->sense_key == UNIT_ATTENTION)
continue;
}
break;
}
+ return result;
}
static struct {
/* Translate the period into ns according to the current spec
* for SDTR/PPR messages */
-static ssize_t
-show_spi_transport_period_helper(struct class_device *cdev, char *buf,
- int period)
+static int period_to_str(char *buf, int period)
{
int len, picosec;
len = sprint_frac(buf, picosec, 1000);
}
+ return len;
+}
+
+static ssize_t
+show_spi_transport_period_helper(struct class_device *cdev, char *buf,
+ int period)
+{
+ int len = period_to_str(buf, period);
buf[len++] = '\n';
buf[len] = '\0';
return len;
/* This is for read/write Domain Validation: If the device supports
* an echo buffer, we do read/write tests to it */
static enum spi_compare_returns
-spi_dv_device_echo_buffer(struct scsi_request *sreq, u8 *buffer,
+spi_dv_device_echo_buffer(struct scsi_device *sdev, u8 *buffer,
u8 *ptr, const int retries)
{
- struct scsi_device *sdev = sreq->sr_device;
int len = ptr - buffer;
- int j, k, r;
+ int j, k, r, result;
unsigned int pattern = 0x0000ffff;
+ struct scsi_sense_hdr sshdr;
const char spi_write_buffer[] = {
WRITE_BUFFER, 0x0a, 0, 0, 0, 0, 0, len >> 8, len & 0xff, 0
}
for (r = 0; r < retries; r++) {
- sreq->sr_cmd_len = 0; /* wait_req to fill in */
- sreq->sr_data_direction = DMA_TO_DEVICE;
- spi_wait_req(sreq, spi_write_buffer, buffer, len);
- if(sreq->sr_result || !scsi_device_online(sdev)) {
- struct scsi_sense_hdr sshdr;
+ result = spi_execute(sdev, spi_write_buffer, DMA_TO_DEVICE,
+ buffer, len, &sshdr);
+ if(result || !scsi_device_online(sdev)) {
scsi_device_set_state(sdev, SDEV_QUIESCE);
- if (scsi_request_normalize_sense(sreq, &sshdr)
+ if (scsi_sense_valid(&sshdr)
&& sshdr.sense_key == ILLEGAL_REQUEST
/* INVALID FIELD IN CDB */
&& sshdr.asc == 0x24 && sshdr.ascq == 0x00)
return SPI_COMPARE_SKIP_TEST;
- SPI_PRINTK(sdev->sdev_target, KERN_ERR, "Write Buffer failure %x\n", sreq->sr_result);
+ sdev_printk(KERN_ERR, sdev, "Write Buffer failure %x\n", result);
return SPI_COMPARE_FAILURE;
}
memset(ptr, 0, len);
- sreq->sr_cmd_len = 0; /* wait_req to fill in */
- sreq->sr_data_direction = DMA_FROM_DEVICE;
- spi_wait_req(sreq, spi_read_buffer, ptr, len);
+ spi_execute(sdev, spi_read_buffer, DMA_FROM_DEVICE,
+ ptr, len, NULL);
scsi_device_set_state(sdev, SDEV_QUIESCE);
if (memcmp(buffer, ptr, len) != 0)
/* This is for the simplest form of Domain Validation: a read test
* on the inquiry data from the device */
static enum spi_compare_returns
-spi_dv_device_compare_inquiry(struct scsi_request *sreq, u8 *buffer,
+spi_dv_device_compare_inquiry(struct scsi_device *sdev, u8 *buffer,
u8 *ptr, const int retries)
{
- int r;
- const int len = sreq->sr_device->inquiry_len;
- struct scsi_device *sdev = sreq->sr_device;
+ int r, result;
+ const int len = sdev->inquiry_len;
const char spi_inquiry[] = {
INQUIRY, 0, 0, 0, len, 0
};
for (r = 0; r < retries; r++) {
- sreq->sr_cmd_len = 0; /* wait_req to fill in */
- sreq->sr_data_direction = DMA_FROM_DEVICE;
-
memset(ptr, 0, len);
- spi_wait_req(sreq, spi_inquiry, ptr, len);
+ result = spi_execute(sdev, spi_inquiry, DMA_FROM_DEVICE,
+ ptr, len, NULL);
- if(sreq->sr_result || !scsi_device_online(sdev)) {
+ if(result || !scsi_device_online(sdev)) {
scsi_device_set_state(sdev, SDEV_QUIESCE);
return SPI_COMPARE_FAILURE;
}
}
static enum spi_compare_returns
-spi_dv_retrain(struct scsi_request *sreq, u8 *buffer, u8 *ptr,
+spi_dv_retrain(struct scsi_device *sdev, u8 *buffer, u8 *ptr,
enum spi_compare_returns
- (*compare_fn)(struct scsi_request *, u8 *, u8 *, int))
+ (*compare_fn)(struct scsi_device *, u8 *, u8 *, int))
{
- struct spi_internal *i = to_spi_internal(sreq->sr_host->transportt);
- struct scsi_device *sdev = sreq->sr_device;
+ struct spi_internal *i = to_spi_internal(sdev->host->transportt);
struct scsi_target *starget = sdev->sdev_target;
int period = 0, prevperiod = 0;
enum spi_compare_returns retval;
for (;;) {
int newperiod;
- retval = compare_fn(sreq, buffer, ptr, DV_LOOPS);
+ retval = compare_fn(sdev, buffer, ptr, DV_LOOPS);
if (retval == SPI_COMPARE_SUCCESS
|| retval == SPI_COMPARE_SKIP_TEST)
* IU, then QAS (if we can control them), then finally
* fall down the periods */
if (i->f->set_iu && spi_iu(starget)) {
- SPI_PRINTK(starget, KERN_ERR, "Domain Validation Disabing Information Units\n");
+ starget_printk(KERN_ERR, starget, "Domain Validation Disabing Information Units\n");
DV_SET(iu, 0);
} else if (i->f->set_qas && spi_qas(starget)) {
- SPI_PRINTK(starget, KERN_ERR, "Domain Validation Disabing Quick Arbitration and Selection\n");
+ starget_printk(KERN_ERR, starget, "Domain Validation Disabing Quick Arbitration and Selection\n");
DV_SET(qas, 0);
} else {
newperiod = spi_period(starget);
if (unlikely(period > 0xff || period == prevperiod)) {
/* Total failure; set to async and return */
- SPI_PRINTK(starget, KERN_ERR, "Domain Validation Failure, dropping back to Asynchronous\n");
+ starget_printk(KERN_ERR, starget, "Domain Validation Failure, dropping back to Asynchronous\n");
DV_SET(offset, 0);
return SPI_COMPARE_FAILURE;
}
- SPI_PRINTK(starget, KERN_ERR, "Domain Validation detected failure, dropping back\n");
+ starget_printk(KERN_ERR, starget, "Domain Validation detected failure, dropping back\n");
DV_SET(period, period);
prevperiod = period;
}
}
static int
-spi_dv_device_get_echo_buffer(struct scsi_request *sreq, u8 *buffer)
+spi_dv_device_get_echo_buffer(struct scsi_device *sdev, u8 *buffer)
{
- int l;
+ int l, result;
/* first off do a test unit ready. This can error out
* because of reservations or some other reason. If it
};
- sreq->sr_cmd_len = 0;
- sreq->sr_data_direction = DMA_NONE;
-
/* We send a set of three TURs to clear any outstanding
* unit attention conditions if they exist (Otherwise the
* buffer tests won't be happy). If the TUR still fails
* (reservation conflict, device not ready, etc) just
* skip the write tests */
for (l = 0; ; l++) {
- spi_wait_req(sreq, spi_test_unit_ready, NULL, 0);
+ result = spi_execute(sdev, spi_test_unit_ready, DMA_NONE,
+ NULL, 0, NULL);
- if(sreq->sr_result) {
+ if(result) {
if(l >= 3)
return 0;
} else {
}
}
- sreq->sr_cmd_len = 0;
- sreq->sr_data_direction = DMA_FROM_DEVICE;
-
- spi_wait_req(sreq, spi_read_buffer_descriptor, buffer, 4);
+ result = spi_execute(sdev, spi_read_buffer_descriptor,
+ DMA_FROM_DEVICE, buffer, 4, NULL);
- if (sreq->sr_result)
+ if (result)
/* Device has no echo buffer */
return 0;
}
static void
-spi_dv_device_internal(struct scsi_request *sreq, u8 *buffer)
+spi_dv_device_internal(struct scsi_device *sdev, u8 *buffer)
{
- struct spi_internal *i = to_spi_internal(sreq->sr_host->transportt);
- struct scsi_device *sdev = sreq->sr_device;
+ struct spi_internal *i = to_spi_internal(sdev->host->transportt);
struct scsi_target *starget = sdev->sdev_target;
int len = sdev->inquiry_len;
/* first set us up for narrow async */
DV_SET(offset, 0);
DV_SET(width, 0);
- if (spi_dv_device_compare_inquiry(sreq, buffer, buffer, DV_LOOPS)
+ if (spi_dv_device_compare_inquiry(sdev, buffer, buffer, DV_LOOPS)
!= SPI_COMPARE_SUCCESS) {
- SPI_PRINTK(starget, KERN_ERR, "Domain Validation Initial Inquiry Failed\n");
+ starget_printk(KERN_ERR, starget, "Domain Validation Initial Inquiry Failed\n");
/* FIXME: should probably offline the device here? */
return;
}
scsi_device_wide(sdev)) {
i->f->set_width(starget, 1);
- if (spi_dv_device_compare_inquiry(sreq, buffer,
+ if (spi_dv_device_compare_inquiry(sdev, buffer,
buffer + len,
DV_LOOPS)
!= SPI_COMPARE_SUCCESS) {
- SPI_PRINTK(starget, KERN_ERR, "Wide Transfers Fail\n");
+ starget_printk(KERN_ERR, starget, "Wide Transfers Fail\n");
i->f->set_width(starget, 0);
}
}
if (!scsi_device_sync(sdev) && !scsi_device_dt(sdev))
return;
- /* see if the device has an echo buffer. If it does we can
- * do the SPI pattern write tests */
-
- len = 0;
- if (scsi_device_dt(sdev))
- len = spi_dv_device_get_echo_buffer(sreq, buffer);
+ /* len == -1 is the signal that we need to ascertain the
+ * presence of an echo buffer before trying to use it. len ==
+ * 0 means we don't have an echo buffer */
+ len = -1;
retry:
if (spi_min_period(starget) == 8)
DV_SET(pcomp_en, 1);
}
-
- if (len == 0) {
- SPI_PRINTK(starget, KERN_INFO, "Domain Validation skipping write tests\n");
- spi_dv_retrain(sreq, buffer, buffer + len,
- spi_dv_device_compare_inquiry);
+ /* Do the read only INQUIRY tests */
+ spi_dv_retrain(sdev, buffer, buffer + sdev->inquiry_len,
+ spi_dv_device_compare_inquiry);
+ /* See if we actually managed to negotiate and sustain DT */
+ if (i->f->get_dt)
+ i->f->get_dt(starget);
+
+ /* see if the device has an echo buffer. If it does we can do
+ * the SPI pattern write tests. Because of some broken
+ * devices, we *only* try this on a device that has actually
+ * negotiated DT */
+
+ if (len == -1 && spi_dt(starget))
+ len = spi_dv_device_get_echo_buffer(sdev, buffer);
+
+ if (len <= 0) {
+ starget_printk(KERN_INFO, starget, "Domain Validation skipping write tests\n");
return;
}
if (len > SPI_MAX_ECHO_BUFFER_SIZE) {
- SPI_PRINTK(starget, KERN_WARNING, "Echo buffer size %d is too big, trimming to %d\n", len, SPI_MAX_ECHO_BUFFER_SIZE);
+ starget_printk(KERN_WARNING, starget, "Echo buffer size %d is too big, trimming to %d\n", len, SPI_MAX_ECHO_BUFFER_SIZE);
len = SPI_MAX_ECHO_BUFFER_SIZE;
}
- if (spi_dv_retrain(sreq, buffer, buffer + len,
+ if (spi_dv_retrain(sdev, buffer, buffer + len,
spi_dv_device_echo_buffer)
== SPI_COMPARE_SKIP_TEST) {
/* OK, the stupid drive can't do a write echo buffer
void
spi_dv_device(struct scsi_device *sdev)
{
- struct scsi_request *sreq = scsi_allocate_request(sdev, GFP_KERNEL);
struct scsi_target *starget = sdev->sdev_target;
u8 *buffer;
const int len = SPI_MAX_ECHO_BUFFER_SIZE*2;
- if (unlikely(!sreq))
- return;
-
if (unlikely(scsi_device_get(sdev)))
- goto out_free_req;
+ return;
buffer = kmalloc(len, GFP_KERNEL);
spi_dv_pending(starget) = 1;
down(&spi_dv_sem(starget));
- SPI_PRINTK(starget, KERN_INFO, "Beginning Domain Validation\n");
+ starget_printk(KERN_INFO, starget, "Beginning Domain Validation\n");
- spi_dv_device_internal(sreq, buffer);
+ spi_dv_device_internal(sdev, buffer);
- SPI_PRINTK(starget, KERN_INFO, "Ending Domain Validation\n");
+ starget_printk(KERN_INFO, starget, "Ending Domain Validation\n");
up(&spi_dv_sem(starget));
spi_dv_pending(starget) = 0;
kfree(buffer);
out_put:
scsi_device_put(sdev);
- out_free_req:
- scsi_release_request(sreq);
}
EXPORT_SYMBOL(spi_dv_device);
tp->hold_mcs ? " HMCS" : "",
tmp, tp->offset);
} else {
- dev_info(&starget->dev, "%sasynchronous.\n",
+ dev_info(&starget->dev, "%sasynchronous\n",
tp->width ? "wide " : "");
}
}
EXPORT_SYMBOL(spi_display_xfer_agreement);
+#ifdef CONFIG_SCSI_CONSTANTS
+static const char * const one_byte_msgs[] = {
+/* 0x00 */ "Command Complete", NULL, "Save Pointers",
+/* 0x03 */ "Restore Pointers", "Disconnect", "Initiator Error",
+/* 0x06 */ "Abort", "Message Reject", "Nop", "Message Parity Error",
+/* 0x0a */ "Linked Command Complete", "Linked Command Complete w/flag",
+/* 0x0c */ "Bus device reset", "Abort Tag", "Clear Queue",
+/* 0x0f */ "Initiate Recovery", "Release Recovery"
+};
+
+static const char * const two_byte_msgs[] = {
+/* 0x20 */ "Simple Queue Tag", "Head of Queue Tag", "Ordered Queue Tag",
+/* 0x23 */ "Ignore Wide Residue"
+};
+
+static const char * const extended_msgs[] = {
+/* 0x00 */ "Modify Data Pointer", "Synchronous Data Transfer Request",
+/* 0x02 */ "SCSI-I Extended Identify", "Wide Data Transfer Request",
+/* 0x04 */ "Parallel Protocol Request"
+};
+
+static void print_nego(const unsigned char *msg, int per, int off, int width)
+{
+ if (per) {
+ char buf[20];
+ period_to_str(buf, msg[per]);
+ printk("period = %s ns ", buf);
+ }
+
+ if (off)
+ printk("offset = %d ", msg[off]);
+ if (width)
+ printk("width = %d ", 8 << msg[width]);
+}
+
+int spi_print_msg(const unsigned char *msg)
+{
+ int len = 0, i;
+ if (msg[0] == EXTENDED_MESSAGE) {
+ len = 3 + msg[1];
+ if (msg[2] < ARRAY_SIZE(extended_msgs))
+ printk ("%s ", extended_msgs[msg[2]]);
+ else
+ printk ("Extended Message, reserved code (0x%02x) ",
+ (int) msg[2]);
+ switch (msg[2]) {
+ case EXTENDED_MODIFY_DATA_POINTER:
+ printk("pointer = %d", (int) (msg[3] << 24) |
+ (msg[4] << 16) | (msg[5] << 8) | msg[6]);
+ break;
+ case EXTENDED_SDTR:
+ print_nego(msg, 3, 4, 0);
+ break;
+ case EXTENDED_WDTR:
+ print_nego(msg, 0, 0, 3);
+ break;
+ case EXTENDED_PPR:
+ print_nego(msg, 3, 5, 6);
+ break;
+ default:
+ for (i = 2; i < len; ++i)
+ printk("%02x ", msg[i]);
+ }
+ /* Identify */
+ } else if (msg[0] & 0x80) {
+ printk("Identify disconnect %sallowed %s %d ",
+ (msg[0] & 0x40) ? "" : "not ",
+ (msg[0] & 0x20) ? "target routine" : "lun",
+ msg[0] & 0x7);
+ len = 1;
+ /* Normal One byte */
+ } else if (msg[0] < 0x1f) {
+ if (msg[0] < ARRAY_SIZE(one_byte_msgs))
+ printk(one_byte_msgs[msg[0]]);
+ else
+ printk("reserved (%02x) ", msg[0]);
+ len = 1;
+ /* Two byte */
+ } else if (msg[0] <= 0x2f) {
+ if ((msg[0] - 0x20) < ARRAY_SIZE(two_byte_msgs))
+ printk("%s %02x ", two_byte_msgs[msg[0] - 0x20],
+ msg[1]);
+ else
+ printk("reserved two byte (%02x %02x) ",
+ msg[0], msg[1]);
+ len = 2;
+ } else
+ printk("reserved");
+ return len;
+}
+EXPORT_SYMBOL(spi_print_msg);
+
+#else /* ifndef CONFIG_SCSI_CONSTANTS */
+
+int spi_print_msg(const unsigned char *msg)
+{
+ int len = 0, i;
+
+ if (msg[0] == EXTENDED_MESSAGE) {
+ len = 3 + msg[1];
+ for (i = 0; i < len; ++i)
+ printk("%02x ", msg[i]);
+ /* Identify */
+ } else if (msg[0] & 0x80) {
+ printk("%02x ", msg[0]);
+ len = 1;
+ /* Normal One byte */
+ } else if (msg[0] < 0x1f) {
+ printk("%02x ", msg[0]);
+ len = 1;
+ /* Two byte */
+ } else if (msg[0] <= 0x2f) {
+ printk("%02x %02x", msg[0], msg[1]);
+ len = 2;
+ } else
+ printk("%02x ", msg[0]);
+ return len;
+}
+EXPORT_SYMBOL(spi_print_msg);
+#endif /* ! CONFIG_SCSI_CONSTANTS */
+
#define SETUP_ATTRIBUTE(field) \
i->private_attrs[count] = class_device_attr_##field; \
if (!i->f->set_##field) { \