* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
+#include <linux/config.h>
#include <linux/ctype.h>
#include <linux/init.h>
#include <linux/module.h>
#include <scsi/scsi_transport.h>
#include <scsi/scsi_transport_spi.h>
-#define SPI_PRINTK(x, l, f, a...) dev_printk(l, &(x)->dev, f , ##a)
-
#define SPI_NUM_ATTRS 14 /* increase this if you add attributes */
#define SPI_OTHER_ATTRS 1 /* Increase this if you add "always
* on" attributes */
return result;
}
-/* Modification of scsi_wait_req that will clear UNIT ATTENTION conditions
- * resulting from (likely) bus and device resets */
static int spi_execute(struct scsi_device *sdev, const void *cmd,
enum dma_data_direction dir,
void *buffer, unsigned bufflen,
unsigned char sense[SCSI_SENSE_BUFFERSIZE];
for(i = 0; i < DV_RETRIES; i++) {
-
- /* FIXME: need to set REQ_FAILFAST */
result = scsi_execute(sdev, cmd, dir, buffer, bufflen,
sense, DV_TIMEOUT, /* retries */ 1,
REQ_FAILFAST);
/* Translate the period into ns according to the current spec
* for SDTR/PPR messages */
-static ssize_t
-show_spi_transport_period_helper(struct class_device *cdev, char *buf,
- int period)
+static int period_to_str(char *buf, int period)
{
int len, picosec;
len = sprint_frac(buf, picosec, 1000);
}
+ return len;
+}
+
+static ssize_t
+show_spi_transport_period_helper(struct class_device *cdev, char *buf,
+ int period)
+{
+ int len = period_to_str(buf, period);
buf[len++] = '\n';
buf[len] = '\0';
return len;
return SPI_COMPARE_SKIP_TEST;
- SPI_PRINTK(sdev->sdev_target, KERN_ERR, "Write Buffer failure %x\n", result);
+ sdev_printk(KERN_ERR, sdev, "Write Buffer failure %x\n", result);
return SPI_COMPARE_FAILURE;
}
* IU, then QAS (if we can control them), then finally
* fall down the periods */
if (i->f->set_iu && spi_iu(starget)) {
- SPI_PRINTK(starget, KERN_ERR, "Domain Validation Disabing Information Units\n");
+ starget_printk(KERN_ERR, starget, "Domain Validation Disabing Information Units\n");
DV_SET(iu, 0);
} else if (i->f->set_qas && spi_qas(starget)) {
- SPI_PRINTK(starget, KERN_ERR, "Domain Validation Disabing Quick Arbitration and Selection\n");
+ starget_printk(KERN_ERR, starget, "Domain Validation Disabing Quick Arbitration and Selection\n");
DV_SET(qas, 0);
} else {
newperiod = spi_period(starget);
if (unlikely(period > 0xff || period == prevperiod)) {
/* Total failure; set to async and return */
- SPI_PRINTK(starget, KERN_ERR, "Domain Validation Failure, dropping back to Asynchronous\n");
+ starget_printk(KERN_ERR, starget, "Domain Validation Failure, dropping back to Asynchronous\n");
DV_SET(offset, 0);
return SPI_COMPARE_FAILURE;
}
- SPI_PRINTK(starget, KERN_ERR, "Domain Validation detected failure, dropping back\n");
+ starget_printk(KERN_ERR, starget, "Domain Validation detected failure, dropping back\n");
DV_SET(period, period);
prevperiod = period;
}
if (spi_dv_device_compare_inquiry(sdev, buffer, buffer, DV_LOOPS)
!= SPI_COMPARE_SUCCESS) {
- SPI_PRINTK(starget, KERN_ERR, "Domain Validation Initial Inquiry Failed\n");
+ starget_printk(KERN_ERR, starget, "Domain Validation Initial Inquiry Failed\n");
/* FIXME: should probably offline the device here? */
return;
}
buffer + len,
DV_LOOPS)
!= SPI_COMPARE_SUCCESS) {
- SPI_PRINTK(starget, KERN_ERR, "Wide Transfers Fail\n");
+ starget_printk(KERN_ERR, starget, "Wide Transfers Fail\n");
i->f->set_width(starget, 0);
}
}
if (!scsi_device_sync(sdev) && !scsi_device_dt(sdev))
return;
- /* see if the device has an echo buffer. If it does we can
- * do the SPI pattern write tests */
-
- len = 0;
- if (scsi_device_dt(sdev))
- len = spi_dv_device_get_echo_buffer(sdev, buffer);
+ /* len == -1 is the signal that we need to ascertain the
+ * presence of an echo buffer before trying to use it. len ==
+ * 0 means we don't have an echo buffer */
+ len = -1;
retry:
if (spi_min_period(starget) == 8)
DV_SET(pcomp_en, 1);
}
+ /* Do the read only INQUIRY tests */
+ spi_dv_retrain(sdev, buffer, buffer + sdev->inquiry_len,
+ spi_dv_device_compare_inquiry);
+ /* See if we actually managed to negotiate and sustain DT */
+ if (i->f->get_dt)
+ i->f->get_dt(starget);
+
+ /* see if the device has an echo buffer. If it does we can do
+ * the SPI pattern write tests. Because of some broken
+ * devices, we *only* try this on a device that has actually
+ * negotiated DT */
+
+ if (len == -1 && spi_dt(starget))
+ len = spi_dv_device_get_echo_buffer(sdev, buffer);
- if (len == 0) {
- SPI_PRINTK(starget, KERN_INFO, "Domain Validation skipping write tests\n");
- spi_dv_retrain(sdev, buffer, buffer + len,
- spi_dv_device_compare_inquiry);
+ if (len <= 0) {
+ starget_printk(KERN_INFO, starget, "Domain Validation skipping write tests\n");
return;
}
if (len > SPI_MAX_ECHO_BUFFER_SIZE) {
- SPI_PRINTK(starget, KERN_WARNING, "Echo buffer size %d is too big, trimming to %d\n", len, SPI_MAX_ECHO_BUFFER_SIZE);
+ starget_printk(KERN_WARNING, starget, "Echo buffer size %d is too big, trimming to %d\n", len, SPI_MAX_ECHO_BUFFER_SIZE);
len = SPI_MAX_ECHO_BUFFER_SIZE;
}
spi_dv_pending(starget) = 1;
down(&spi_dv_sem(starget));
- SPI_PRINTK(starget, KERN_INFO, "Beginning Domain Validation\n");
+ starget_printk(KERN_INFO, starget, "Beginning Domain Validation\n");
spi_dv_device_internal(sdev, buffer);
- SPI_PRINTK(starget, KERN_INFO, "Ending Domain Validation\n");
+ starget_printk(KERN_INFO, starget, "Ending Domain Validation\n");
up(&spi_dv_sem(starget));
spi_dv_pending(starget) = 0;
tp->hold_mcs ? " HMCS" : "",
tmp, tp->offset);
} else {
- dev_info(&starget->dev, "%sasynchronous.\n",
+ dev_info(&starget->dev, "%sasynchronous\n",
tp->width ? "wide " : "");
}
}
EXPORT_SYMBOL(spi_display_xfer_agreement);
+#ifdef CONFIG_SCSI_CONSTANTS
+static const char * const one_byte_msgs[] = {
+/* 0x00 */ "Command Complete", NULL, "Save Pointers",
+/* 0x03 */ "Restore Pointers", "Disconnect", "Initiator Error",
+/* 0x06 */ "Abort", "Message Reject", "Nop", "Message Parity Error",
+/* 0x0a */ "Linked Command Complete", "Linked Command Complete w/flag",
+/* 0x0c */ "Bus device reset", "Abort Tag", "Clear Queue",
+/* 0x0f */ "Initiate Recovery", "Release Recovery"
+};
+
+static const char * const two_byte_msgs[] = {
+/* 0x20 */ "Simple Queue Tag", "Head of Queue Tag", "Ordered Queue Tag",
+/* 0x23 */ "Ignore Wide Residue"
+};
+
+static const char * const extended_msgs[] = {
+/* 0x00 */ "Modify Data Pointer", "Synchronous Data Transfer Request",
+/* 0x02 */ "SCSI-I Extended Identify", "Wide Data Transfer Request",
+/* 0x04 */ "Parallel Protocol Request"
+};
+
+static void print_nego(const unsigned char *msg, int per, int off, int width)
+{
+ if (per) {
+ char buf[20];
+ period_to_str(buf, msg[per]);
+ printk("period = %s ns ", buf);
+ }
+
+ if (off)
+ printk("offset = %d ", msg[off]);
+ if (width)
+ printk("width = %d ", 8 << msg[width]);
+}
+
+int spi_print_msg(const unsigned char *msg)
+{
+ int len = 0, i;
+ if (msg[0] == EXTENDED_MESSAGE) {
+ len = 3 + msg[1];
+ if (msg[2] < ARRAY_SIZE(extended_msgs))
+ printk ("%s ", extended_msgs[msg[2]]);
+ else
+ printk ("Extended Message, reserved code (0x%02x) ",
+ (int) msg[2]);
+ switch (msg[2]) {
+ case EXTENDED_MODIFY_DATA_POINTER:
+ printk("pointer = %d", (int) (msg[3] << 24) |
+ (msg[4] << 16) | (msg[5] << 8) | msg[6]);
+ break;
+ case EXTENDED_SDTR:
+ print_nego(msg, 3, 4, 0);
+ break;
+ case EXTENDED_WDTR:
+ print_nego(msg, 0, 0, 3);
+ break;
+ case EXTENDED_PPR:
+ print_nego(msg, 3, 5, 6);
+ break;
+ default:
+ for (i = 2; i < len; ++i)
+ printk("%02x ", msg[i]);
+ }
+ /* Identify */
+ } else if (msg[0] & 0x80) {
+ printk("Identify disconnect %sallowed %s %d ",
+ (msg[0] & 0x40) ? "" : "not ",
+ (msg[0] & 0x20) ? "target routine" : "lun",
+ msg[0] & 0x7);
+ len = 1;
+ /* Normal One byte */
+ } else if (msg[0] < 0x1f) {
+ if (msg[0] < ARRAY_SIZE(one_byte_msgs))
+ printk(one_byte_msgs[msg[0]]);
+ else
+ printk("reserved (%02x) ", msg[0]);
+ len = 1;
+ /* Two byte */
+ } else if (msg[0] <= 0x2f) {
+ if ((msg[0] - 0x20) < ARRAY_SIZE(two_byte_msgs))
+ printk("%s %02x ", two_byte_msgs[msg[0] - 0x20],
+ msg[1]);
+ else
+ printk("reserved two byte (%02x %02x) ",
+ msg[0], msg[1]);
+ len = 2;
+ } else
+ printk("reserved");
+ return len;
+}
+EXPORT_SYMBOL(spi_print_msg);
+
+#else /* ifndef CONFIG_SCSI_CONSTANTS */
+
+int spi_print_msg(const unsigned char *msg)
+{
+ int len = 0, i;
+
+ if (msg[0] == EXTENDED_MESSAGE) {
+ len = 3 + msg[1];
+ for (i = 0; i < len; ++i)
+ printk("%02x ", msg[i]);
+ /* Identify */
+ } else if (msg[0] & 0x80) {
+ printk("%02x ", msg[0]);
+ len = 1;
+ /* Normal One byte */
+ } else if (msg[0] < 0x1f) {
+ printk("%02x ", msg[0]);
+ len = 1;
+ /* Two byte */
+ } else if (msg[0] <= 0x2f) {
+ printk("%02x %02x", msg[0], msg[1]);
+ len = 2;
+ } else
+ printk("%02x ", msg[0]);
+ return len;
+}
+EXPORT_SYMBOL(spi_print_msg);
+#endif /* ! CONFIG_SCSI_CONSTANTS */
+
#define SETUP_ATTRIBUTE(field) \
i->private_attrs[count] = class_device_attr_##field; \
if (!i->f->set_##field) { \