#include <asm/semaphore.h>
#include <scsi/scsi.h>
+#include <scsi/scsi_cmnd.h>
#include <scsi/scsi_device.h>
#include <scsi/scsi_driver.h>
#include <scsi/scsi_devinfo.h>
#include <scsi/scsi_host.h>
-#include <scsi/scsi_request.h>
#include <scsi/scsi_transport.h>
#include <scsi/scsi_eh.h>
/* release fn is set up in scsi_sysfs_device_initialise, so
* have to free and put manually here */
put_device(&starget->dev);
+ kfree(sdev);
goto out;
}
{
struct device *parent = dev->parent;
struct scsi_target *starget = to_scsi_target(dev);
- struct Scsi_Host *shost = dev_to_shost(parent);
- if (shost->hostt->target_destroy)
- shost->hostt->target_destroy(starget);
kfree(starget);
put_device(parent);
}
+ shost->transportt->target_size;
struct scsi_target *starget;
struct scsi_target *found_target;
+ int error;
starget = kzalloc(size, GFP_KERNEL);
if (!starget) {
spin_unlock_irqrestore(shost->host_lock, flags);
/* allocate and add */
transport_setup_device(dev);
- device_add(dev);
+ error = device_add(dev);
+ if (error) {
+ dev_err(dev, "target device_add failed, error %d\n", error);
+ spin_lock_irqsave(shost->host_lock, flags);
+ list_del_init(&starget->siblings);
+ spin_unlock_irqrestore(shost->host_lock, flags);
+ transport_destroy_device(dev);
+ put_device(parent);
+ kfree(starget);
+ return NULL;
+ }
transport_add_device(dev);
if (shost->hostt->target_alloc) {
- int error = shost->hostt->target_alloc(starget);
+ error = shost->hostt->target_alloc(starget);
if(error) {
dev_printk(KERN_ERR, dev, "target allocation failed, error %d\n", error);
device_del(&starget->dev);
transport_destroy_device(&starget->dev);
spin_lock_irqsave(shost->host_lock, flags);
+ if (shost->hostt->target_destroy)
+ shost->hostt->target_destroy(starget);
list_del_init(&starget->siblings);
spin_unlock_irqrestore(shost->host_lock, flags);
put_device(&starget->dev);
case TYPE_MEDIUM_CHANGER:
case TYPE_ENCLOSURE:
case TYPE_COMM:
+ case TYPE_RAID:
case TYPE_RBC:
sdev->writeable = 1;
break;
if (*bflags & BLIST_SELECT_NO_ATN)
sdev->select_no_atn = 1;
+ /*
+ * Maximum 512 sector transfer length
+ * broken RA4x00 Compaq Disk Array
+ */
+ if (*bflags & BLIST_MAX_512)
+ blk_queue_max_sectors(sdev->request_queue, 512);
+
/*
* Some devices may not want to have a start command automatically
* issued when a device is added.
transport_configure_device(&sdev->sdev_gendev);
- if (sdev->host->hostt->slave_configure)
- sdev->host->hostt->slave_configure(sdev);
+ if (sdev->host->hostt->slave_configure) {
+ int ret = sdev->host->hostt->slave_configure(sdev);
+ if (ret) {
+ /*
+ * if LLDD reports slave not present, don't clutter
+ * console with alloc failure messages
+ */
+ if (ret != -ENXIO) {
+ sdev_printk(KERN_ERR, sdev,
+ "failed to configure device\n");
+ }
+ return SCSI_SCAN_NO_RESPONSE;
+ }
+ }
/*
* Ok, the device is now all set up, we can
put_device(&sdev->sdev_gendev);
}
+#ifdef CONFIG_SCSI_LOGGING
+/**
+ * scsi_inq_str - print INQUIRY data from min to max index,
+ * strip trailing whitespace
+ * @buf: Output buffer with at least end-first+1 bytes of space
+ * @inq: Inquiry buffer (input)
+ * @first: Offset of string into inq
+ * @end: Index after last character in inq
+ */
+static unsigned char *scsi_inq_str(unsigned char *buf, unsigned char *inq,
+ unsigned first, unsigned end)
+{
+ unsigned term = 0, idx;
+
+ for (idx = 0; idx + first < end && idx + first < inq[4] + 5; idx++) {
+ if (inq[idx+first] > ' ') {
+ buf[idx] = inq[idx+first];
+ term = idx+1;
+ } else {
+ buf[idx] = ' ';
+ }
+ }
+ buf[term] = 0;
+ return buf;
+}
+#endif
/**
* scsi_probe_and_add_lun - probe a LUN, if a LUN is found add it
if (scsi_probe_lun(sdev, result, result_len, &bflags))
goto out_free_result;
+ if (bflagsp)
+ *bflagsp = bflags;
/*
* result contains valid SCSI INQUIRY data.
*/
- if ((result[0] >> 5) == 3) {
+ if (((result[0] >> 5) == 3) && !(bflags & BLIST_ATTACH_PQ3)) {
/*
* For a Peripheral qualifier 3 (011b), the SCSI
* spec says: The device server is not capable of
* logical disk configured at sdev->lun, but there
* is a target id responding.
*/
- SCSI_LOG_SCAN_BUS(3, printk(KERN_INFO
- "scsi scan: peripheral qualifier of 3,"
- " no device added\n"));
+ SCSI_LOG_SCAN_BUS(2, sdev_printk(KERN_INFO, sdev, "scsi scan:"
+ " peripheral qualifier of 3, device not"
+ " added\n"))
+ if (lun == 0) {
+ SCSI_LOG_SCAN_BUS(1, {
+ unsigned char vend[9];
+ unsigned char mod[17];
+
+ sdev_printk(KERN_INFO, sdev,
+ "scsi scan: consider passing scsi_mod."
+ "dev_flags=%s:%s:0x240 or 0x800240\n",
+ scsi_inq_str(vend, result, 8, 16),
+ scsi_inq_str(mod, result, 16, 32));
+ });
+ }
+
res = SCSI_SCAN_TARGET_PRESENT;
goto out_free_result;
}
sdev->lockable = 0;
scsi_unlock_floptical(sdev, result);
}
- if (bflagsp)
- *bflagsp = bflags;
}
out_free_result:
* scsi_sequential_lun_scan - sequentially scan a SCSI target
* @starget: pointer to target structure to scan
* @bflags: black/white list flag for LUN 0
- * @lun0_res: result of scanning LUN 0
*
* Description:
* Generally, scan from LUN 1 (LUN 0 is assumed to already have been
* Modifies sdevscan->lun.
**/
static void scsi_sequential_lun_scan(struct scsi_target *starget,
- int bflags, int lun0_res, int scsi_level,
- int rescan)
+ int bflags, int scsi_level, int rescan)
{
unsigned int sparse_lun, lun, max_dev_lun;
struct Scsi_Host *shost = dev_to_shost(starget->dev.parent);
} else
sparse_lun = 0;
- /*
- * If not sparse lun and no device attached at LUN 0 do not scan
- * any further.
- */
- if (!sparse_lun && (lun0_res != SCSI_SCAN_LUN_PRESENT))
- return;
-
/*
* If less than SCSI_1_CSS, and no special lun scaning, stop
* scanning; this matches 2.4 behaviour, but could just be a bug
* Also allow SCSI-2 if BLIST_REPORTLUN2 is set and host adapter does
* support more than 8 LUNs.
*/
- if ((bflags & BLIST_NOREPORTLUN) ||
- starget->scsi_level < SCSI_2 ||
- (starget->scsi_level < SCSI_3 &&
- (!(bflags & BLIST_REPORTLUN2) || shost->max_lun <= 8)) )
+ if (bflags & BLIST_NOREPORTLUN)
+ return 1;
+ if (starget->scsi_level < SCSI_2 &&
+ starget->scsi_level != SCSI_UNKNOWN)
+ return 1;
+ if (starget->scsi_level < SCSI_3 &&
+ (!(bflags & BLIST_REPORTLUN2) || shost->max_lun <= 8))
return 1;
if (bflags & BLIST_NOLUN)
return 0;
* do a sequential scan.
*/
scsi_sequential_lun_scan(starget, bflags,
- res, starget->scsi_level, rescan);
+ starget->scsi_level, rescan);
}
out_reap:
__FUNCTION__, channel, id, lun));
if (((channel != SCAN_WILD_CARD) && (channel > shost->max_channel)) ||
- ((id != SCAN_WILD_CARD) && (id > shost->max_id)) ||
+ ((id != SCAN_WILD_CARD) && (id >= shost->max_id)) ||
((lun != SCAN_WILD_CARD) && (lun > shost->max_lun)))
return -EINVAL;
projects / linux-2.6 / blobdiff