#include <linux/interrupt.h>
#include <linux/sched.h>
#include <linux/device.h>
-#include "scsi.h"
#include <scsi/scsi_host.h>
+#include <scsi/scsi_cmnd.h>
#include <linux/libata.h>
#include <asm/io.h>
#include "sata_promise.h"
#define DRV_NAME "sata_sx4"
-#define DRV_VERSION "0.7"
+#define DRV_VERSION "0.8"
enum {
.dma_boundary = ATA_DMA_BOUNDARY,
.slave_configure = ata_scsi_slave_config,
.bios_param = ata_std_bios_param,
- .ordered_flush = 1,
};
static const struct ata_port_operations pdc_20621_ops = {
.host_stop = pdc20621_host_stop,
};
-static struct ata_port_info pdc_port_info[] = {
+static const struct ata_port_info pdc_port_info[] = {
/* board_20621 */
{
.sht = &pdc_sata_sht,
.host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
- ATA_FLAG_SRST | ATA_FLAG_MMIO,
+ ATA_FLAG_SRST | ATA_FLAG_MMIO |
+ ATA_FLAG_NO_ATAPI,
.pio_mask = 0x1f, /* pio0-4 */
.mwdma_mask = 0x07, /* mwdma0-2 */
.udma_mask = 0x7f, /* udma0-6 ; FIXME */
};
-static struct pci_device_id pdc_sata_pci_tbl[] = {
+static const struct pci_device_id pdc_sata_pci_tbl[] = {
{ PCI_VENDOR_ID_PROMISE, 0x6622, PCI_ANY_ID, PCI_ANY_ID, 0, 0,
board_20621 },
{ } /* terminate list */
VPRINTK("ata%u: read hdma, 0x%x 0x%x\n", ap->id,
readl(mmio + 0x104), readl(mmio + PDC_HDMA_CTLSTAT));
/* get drive status; clear intr; complete txn */
- ata_qc_complete(qc, ac_err_mask(ata_wait_idle(ap)));
+ qc->err_mask |= ac_err_mask(ata_wait_idle(ap));
+ ata_qc_complete(qc);
pdc20621_pop_hdma(qc);
}
VPRINTK("ata%u: write ata, 0x%x 0x%x\n", ap->id,
readl(mmio + 0x104), readl(mmio + PDC_HDMA_CTLSTAT));
/* get drive status; clear intr; complete txn */
- ata_qc_complete(qc, ac_err_mask(ata_wait_idle(ap)));
+ qc->err_mask |= ac_err_mask(ata_wait_idle(ap));
+ ata_qc_complete(qc);
pdc20621_pop_hdma(qc);
}
handled = 1;
status = ata_busy_wait(ap, ATA_BUSY | ATA_DRQ, 1000);
DPRINTK("BUS_NODATA (drv_stat 0x%X)\n", status);
- ata_qc_complete(qc, ac_err_mask(status));
+ qc->err_mask |= ac_err_mask(status);
+ ata_qc_complete(qc);
handled = 1;
} else {
case ATA_PROT_DMA:
case ATA_PROT_NODATA:
printk(KERN_ERR "ata%u: command timeout\n", ap->id);
- ata_qc_complete(qc, __ac_err_mask(ata_wait_idle(ap)));
+ qc->err_mask |= __ac_err_mask(ata_wait_idle(ap));
+ ata_qc_complete(qc);
break;
default:
printk(KERN_ERR "ata%u: unknown timeout, cmd 0x%x stat 0x%x\n",
ap->id, qc->tf.command, drv_stat);
- ata_qc_complete(qc, ac_err_mask(drv_stat));
+ qc->err_mask |= ac_err_mask(drv_stat);
+ ata_qc_complete(qc);
break;
}