#include <linux/dma-mapping.h>
#include <linux/device.h>
#include <scsi/scsi_host.h>
-#include "scsi.h"
+#include <scsi/scsi_cmnd.h>
#include <linux/libata.h>
#include <asm/io.h>
PORT_CS_DEV_RST = (1 << 1), /* device reset */
PORT_CS_INIT = (1 << 2), /* port initialize */
PORT_CS_IRQ_WOC = (1 << 3), /* interrupt write one to clear */
+ PORT_CS_CDB16 = (1 << 5), /* 0=12b cdb, 1=16b cdb */
PORT_CS_RESUME = (1 << 6), /* port resume */
PORT_CS_32BIT_ACTV = (1 << 10), /* 32-bit activation */
PORT_CS_PM_EN = (1 << 13), /* port multiplier enable */
PORT_CERR_XFR_PCIPERR = 35, /* PSD ecode 11 - PCI prity err during transfer */
PORT_CERR_SENDSERVICE = 36, /* FIS received while sending service */
+ /* bits of PRB control field */
+ PRB_CTRL_PROTOCOL = (1 << 0), /* override def. ATA protocol */
+ PRB_CTRL_PACKET_READ = (1 << 4), /* PACKET cmd read */
+ PRB_CTRL_PACKET_WRITE = (1 << 5), /* PACKET cmd write */
+ PRB_CTRL_NIEN = (1 << 6), /* Mask completion irq */
+ PRB_CTRL_SRST = (1 << 7), /* Soft reset request (ign BSY?) */
+
+ /* PRB protocol field */
+ PRB_PROT_PACKET = (1 << 0),
+ PRB_PROT_TCQ = (1 << 1),
+ PRB_PROT_NCQ = (1 << 2),
+ PRB_PROT_READ = (1 << 3),
+ PRB_PROT_WRITE = (1 << 4),
+ PRB_PROT_TRANSPARENT = (1 << 5),
+
/*
* Other constants
*/
SGE_TRM = (1 << 31), /* Last SGE in chain */
- PRB_SOFT_RST = (1 << 7), /* Soft reset request (ign BSY?) */
+ SGE_LNK = (1 << 30), /* linked list
+ Points to SGT, not SGE */
+ SGE_DRD = (1 << 29), /* discard data read (/dev/null)
+ data address ignored */
/* board id */
BID_SIL3124 = 0,
static void sil24_host_stop(struct ata_host_set *host_set);
static int sil24_init_one(struct pci_dev *pdev, const struct pci_device_id *ent);
-static struct pci_device_id sil24_pci_tbl[] = {
+static const struct pci_device_id sil24_pci_tbl[] = {
{ 0x1095, 0x3124, PCI_ANY_ID, PCI_ANY_ID, 0, 0, BID_SIL3124 },
{ 0x1095, 0x3132, PCI_ANY_ID, PCI_ANY_ID, 0, 0, BID_SIL3132 },
{ 0x1095, 0x3131, PCI_ANY_ID, PCI_ANY_ID, 0, 0, BID_SIL3131 },
.remove = ata_pci_remove_one, /* safe? */
};
-static Scsi_Host_Template sil24_sht = {
+static struct scsi_host_template sil24_sht = {
.module = THIS_MODULE,
.name = DRV_NAME,
.ioctl = ata_scsi_ioctl,
struct sil24_port_priv *pp = ap->private_data;
sil24_cblk_free(pp, dev);
+ ata_pad_free(ap, dev);
kfree(pp);
}