* Port request block (PRB) 32 bytes
*/
struct sil24_prb {
- u16 ctrl;
- u16 prot;
- u32 rx_cnt;
+ __le16 ctrl;
+ __le16 prot;
+ __le32 rx_cnt;
u8 fis[6 * 4];
};
* Scatter gather entry (SGE) 16 bytes
*/
struct sil24_sge {
- u64 addr;
- u32 cnt;
- u32 flags;
+ __le64 addr;
+ __le32 cnt;
+ __le32 flags;
};
/*
* Port multiplier
*/
struct sil24_port_multiplier {
- u32 diag;
- u32 sactive;
+ __le32 diag;
+ __le32 sactive;
};
enum {
PORT_IRQ_SDB_NOTIFY = (1 << 11), /* SDB notify received */
DEF_PORT_IRQ = PORT_IRQ_COMPLETE | PORT_IRQ_ERROR |
- PORT_IRQ_DEV_XCHG | PORT_IRQ_UNK_FIS,
+ PORT_IRQ_PHYRDY_CHG | PORT_IRQ_DEV_XCHG |
+ PORT_IRQ_UNK_FIS,
/* bits[27:16] are unmasked (raw) */
PORT_IRQ_RAW_SHIFT = 16,
/* host flags */
SIL24_COMMON_FLAGS = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
ATA_FLAG_MMIO | ATA_FLAG_PIO_DMA |
- ATA_FLAG_NCQ,
+ ATA_FLAG_NCQ | ATA_FLAG_SKIP_D2H_BSY,
SIL24_FLAG_PCIX_IRQ_WOC = (1 << 24), /* IRQ loss errata on PCI-X */
IRQ_STAT_4PORTS = 0xf,
static u32 sil24_scr_read(struct ata_port *ap, unsigned sc_reg);
static void sil24_scr_write(struct ata_port *ap, unsigned sc_reg, u32 val);
static void sil24_tf_read(struct ata_port *ap, struct ata_taskfile *tf);
-static int sil24_probe_reset(struct ata_port *ap, unsigned int *classes);
static void sil24_qc_prep(struct ata_queued_cmd *qc);
static unsigned int sil24_qc_issue(struct ata_queued_cmd *qc);
static void sil24_irq_clear(struct ata_port *ap);
.proc_name = DRV_NAME,
.dma_boundary = ATA_DMA_BOUNDARY,
.slave_configure = ata_scsi_slave_config,
+ .slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
};
.tf_read = sil24_tf_read,
- .probe_reset = sil24_probe_reset,
-
.qc_prep = sil24_qc_prep,
.qc_issue = sil24_qc_issue,
{
void __iomem *port = (void __iomem *)ap->ioaddr.cmd_addr;
const char *reason;
- int tout_msec;
+ int tout_msec, rc;
u32 tmp;
/* sil24 does the right thing(tm) without any protection */
tmp = ata_wait_register(port + PORT_CTRL_STAT,
PORT_CS_DEV_RST, PORT_CS_DEV_RST, 10, tout_msec);
- /* SStatus oscillates between zero and valid status for short
- * duration after DEV_RST, give it time to settle.
+ /* SStatus oscillates between zero and valid status after
+ * DEV_RST, debounce it.
*/
- msleep(100);
+ rc = sata_phy_debounce(ap, sata_deb_timing_before_fsrst);
+ if (rc) {
+ reason = "PHY debouncing failed";
+ goto err;
+ }
if (tmp & PORT_CS_DEV_RST) {
if (ata_port_offline(ap))
goto err;
}
- if (ata_busy_sleep(ap, ATA_TMOUT_BOOT_QUICK, ATA_TMOUT_BOOT)) {
- reason = "device not ready";
- goto err;
- }
-
- /* sil24 doesn't report device class code after hardreset,
- * leave *class alone.
+ /* Sil24 doesn't store signature FIS after hardreset, so we
+ * can't wait for BSY to clear. Some devices take a long time
+ * to get ready and those devices will choke if we don't wait
+ * for BSY clearance here. Tell libata to perform follow-up
+ * softreset.
*/
- return 0;
+ return -EAGAIN;
err:
ata_port_printk(ap, KERN_ERR, "hardreset failed (%s)\n", reason);
return -EIO;
}
-static int sil24_probe_reset(struct ata_port *ap, unsigned int *classes)
-{
- return ata_drive_probe_reset(ap, ata_std_probeinit,
- sil24_softreset, sil24_hardreset,
- ata_std_postreset, classes);
-}
-
static inline void sil24_fill_sg(struct ata_queued_cmd *qc,
struct sil24_sge *sge)
{
ata_ehi_push_desc(ehi, "irq_stat 0x%08x", irq_stat);
- if (irq_stat & PORT_IRQ_DEV_XCHG) {
- ehi->err_mask |= AC_ERR_ATA_BUS;
- /* sil24 doesn't recover very well from phy
- * disconnection with a softreset. Force hardreset.
- */
- ehi->action |= ATA_EH_HARDRESET;
- ata_ehi_push_desc(ehi, ", device_exchanged");
+ if (irq_stat & (PORT_IRQ_PHYRDY_CHG | PORT_IRQ_DEV_XCHG)) {
+ ata_ehi_hotplugged(ehi);
+ ata_ehi_push_desc(ehi, ", %s",
+ irq_stat & PORT_IRQ_PHYRDY_CHG ?
+ "PHY RDY changed" : "device exchanged");
freeze = 1;
}