.dma_boundary = ATA_DMA_BOUNDARY,
.slave_configure = ata_scsi_slave_config,
.bios_param = ata_std_bios_param,
- .ordered_flush = 1, /* NCQ not supported yet */
};
static const struct ata_port_operations sil24_ops = {
*/
printk(KERN_ERR "ata%u: command timeout\n", ap->id);
qc->scsidone = scsi_finish_command;
- ata_qc_complete(qc, AC_ERR_OTHER);
+ qc->err_mask |= AC_ERR_OTHER;
+ ata_qc_complete(qc);
sil24_reset_controller(ap);
}
if (serror)
writel(serror, port + PORT_SERROR);
- printk(KERN_ERR DRV_NAME " ata%u: error interrupt on port%d\n"
- " stat=0x%x irq=0x%x cmd_err=%d sstatus=0x%x serror=0x%x\n",
- ap->id, ap->port_no, slot_stat, irq_stat, cmd_err, sstatus, serror);
+ /*
+ * Don't log ATAPI device errors. They're supposed to happen
+ * and any serious errors will be logged using sense data by
+ * the SCSI layer.
+ */
+ if (ap->device[0].class != ATA_DEV_ATAPI || cmd_err > PORT_CERR_SDB)
+ printk("ata%u: error interrupt on port%d\n"
+ " stat=0x%x irq=0x%x cmd_err=%d sstatus=0x%x serror=0x%x\n",
+ ap->id, ap->port_no, slot_stat, irq_stat, cmd_err, sstatus, serror);
if (cmd_err == PORT_CERR_DEV || cmd_err == PORT_CERR_SDB) {
/*
sil24_reset_controller(ap);
}
- if (qc)
- ata_qc_complete(qc, err_mask);
+ if (qc) {
+ qc->err_mask |= err_mask;
+ ata_qc_complete(qc);
+ }
}
static inline void sil24_host_intr(struct ata_port *ap)
*/
sil24_update_tf(ap);
- if (qc)
- ata_qc_complete(qc, ac_err_mask(pp->tf.command));
+ if (qc) {
+ qc->err_mask |= ac_err_mask(pp->tf.command);
+ ata_qc_complete(qc);
+ }
} else
sil24_error_intr(ap, slot_stat);
}