#include <linux/vmalloc.h>
#include <linux/delay.h>
#include <linux/kthread.h>
+#include <linux/mutex.h>
#include <scsi/scsi_tcq.h>
#include <scsi/scsicam.h>
*/
static struct kmem_cache *srb_cachep;
-/*
- * Ioctl related information.
- */
int num_hosts;
int ql2xlogintimeout = 20;
module_param(ql2xlogintimeout, int, S_IRUGO|S_IRUSR);
static void qla2x00_config_dma_addressing(scsi_qla_host_t *ha);
-int ql2xfdmienable;
+int ql2xfdmienable=1;
module_param(ql2xfdmienable, int, S_IRUGO|S_IRUSR);
MODULE_PARM_DESC(ql2xfdmienable,
"Enables FDMI registratons "
void (*fn)(struct scsi_cmnd *));
static int qla2xxx_eh_abort(struct scsi_cmnd *);
static int qla2xxx_eh_device_reset(struct scsi_cmnd *);
+static int qla2xxx_eh_target_reset(struct scsi_cmnd *);
static int qla2xxx_eh_bus_reset(struct scsi_cmnd *);
static int qla2xxx_eh_host_reset(struct scsi_cmnd *);
-static int qla2x00_device_reset(scsi_qla_host_t *, fc_port_t *);
static int qla2x00_change_queue_depth(struct scsi_device *, int);
static int qla2x00_change_queue_type(struct scsi_device *, int);
.eh_abort_handler = qla2xxx_eh_abort,
.eh_device_reset_handler = qla2xxx_eh_device_reset,
+ .eh_target_reset_handler = qla2xxx_eh_target_reset,
.eh_bus_reset_handler = qla2xxx_eh_bus_reset,
.eh_host_reset_handler = qla2xxx_eh_host_reset,
.eh_abort_handler = qla2xxx_eh_abort,
.eh_device_reset_handler = qla2xxx_eh_device_reset,
+ .eh_target_reset_handler = qla2xxx_eh_target_reset,
.eh_bus_reset_handler = qla2xxx_eh_bus_reset,
.eh_host_reset_handler = qla2xxx_eh_host_reset,
strcpy(str, "PCIe (");
if (lspeed == 1)
- strcat(str, "2.5Gb/s ");
+ strcat(str, "2.5GT/s ");
else if (lspeed == 2)
- strcat(str, "5.0Gb/s ");
+ strcat(str, "5.0GT/s ");
else
strcat(str, "<unknown> ");
snprintf(lwstr, sizeof(lwstr), "x%d)", lwidth);
strcat(str, "[T10 CRC] ");
if (ha->fw_attributes & BIT_5)
strcat(str, "[VI] ");
+ if (ha->fw_attributes & BIT_10)
+ strcat(str, "[84XX] ");
if (ha->fw_attributes & BIT_13)
strcat(str, "[Experimental]");
return str;
else
return_status = QLA_FUNCTION_FAILED;
- DEBUG2(printk("%s return_status=%d\n",__func__,return_status));
-
return (return_status);
}
DEBUG2(printk("%s(%ld): aborting sp %p from RISC. pid=%ld.\n",
__func__, ha->host_no, sp, serial));
- DEBUG3(qla2x00_print_scsi_cmd(cmd));
spin_unlock_irqrestore(&pha->hardware_lock, flags);
if (ha->isp_ops->abort_command(ha, sp)) {
return ret;
}
-/**************************************************************************
-* qla2x00_eh_wait_for_pending_target_commands
-*
-* Description:
-* Waits for all the commands to come back from the specified target.
-*
-* Input:
-* ha - pointer to scsi_qla_host structure.
-* t - target
-* Returns:
-* Either SUCCESS or FAILED.
-*
-* Note:
-**************************************************************************/
+enum nexus_wait_type {
+ WAIT_HOST = 0,
+ WAIT_TARGET,
+ WAIT_LUN,
+};
+
static int
-qla2x00_eh_wait_for_pending_target_commands(scsi_qla_host_t *ha, unsigned int t)
+qla2x00_eh_wait_for_pending_commands(scsi_qla_host_t *ha, unsigned int t,
+ unsigned int l, enum nexus_wait_type type)
{
- int cnt;
- int status;
- srb_t *sp;
- struct scsi_cmnd *cmd;
+ int cnt, match, status;
+ srb_t *sp;
unsigned long flags;
scsi_qla_host_t *pha = to_qla_parent(ha);
- status = 0;
-
- /*
- * Waiting for all commands for the designated target in the active
- * array
- */
- for (cnt = 1; cnt < MAX_OUTSTANDING_COMMANDS; cnt++) {
- spin_lock_irqsave(&pha->hardware_lock, flags);
+ status = QLA_SUCCESS;
+ spin_lock_irqsave(&pha->hardware_lock, flags);
+ for (cnt = 1; status == QLA_SUCCESS && cnt < MAX_OUTSTANDING_COMMANDS;
+ cnt++) {
sp = pha->outstanding_cmds[cnt];
- if (sp) {
- cmd = sp->cmd;
- spin_unlock_irqrestore(&pha->hardware_lock, flags);
- if (cmd->device->id == t &&
- ha->vp_idx == sp->ha->vp_idx) {
- if (!qla2x00_eh_wait_on_command(ha, cmd)) {
- status = 1;
- break;
- }
- }
- } else {
- spin_unlock_irqrestore(&pha->hardware_lock, flags);
+ if (!sp)
+ continue;
+ if (ha->vp_idx != sp->ha->vp_idx)
+ continue;
+ match = 0;
+ switch (type) {
+ case WAIT_HOST:
+ match = 1;
+ break;
+ case WAIT_TARGET:
+ match = sp->cmd->device->id == t;
+ break;
+ case WAIT_LUN:
+ match = (sp->cmd->device->id == t &&
+ sp->cmd->device->lun == l);
+ break;
}
+ if (!match)
+ continue;
+
+ spin_unlock_irqrestore(&pha->hardware_lock, flags);
+ status = qla2x00_eh_wait_on_command(ha, sp->cmd);
+ spin_lock_irqsave(&pha->hardware_lock, flags);
}
- return (status);
+ spin_unlock_irqrestore(&pha->hardware_lock, flags);
+
+ return status;
}
+static char *reset_errors[] = {
+ "HBA not online",
+ "HBA not ready",
+ "Task management failed",
+ "Waiting for command completions",
+};
-/**************************************************************************
-* qla2xxx_eh_device_reset
-*
-* Description:
-* The device reset function will reset the target and abort any
-* executing commands.
-*
-* NOTE: The use of SP is undefined within this context. Do *NOT*
-* attempt to use this value, even if you determine it is
-* non-null.
-*
-* Input:
-* cmd = Linux SCSI command packet of the command that cause the
-* bus device reset.
-*
-* Returns:
-* SUCCESS/FAILURE (defined as macro in scsi.h).
-*
-**************************************************************************/
static int
-qla2xxx_eh_device_reset(struct scsi_cmnd *cmd)
+__qla2xxx_eh_generic_reset(char *name, enum nexus_wait_type type,
+ struct scsi_cmnd *cmd, int (*do_reset)(struct fc_port *, unsigned int))
{
scsi_qla_host_t *ha = shost_priv(cmd->device->host);
fc_port_t *fcport = (struct fc_port *) cmd->device->hostdata;
- int ret = FAILED;
- unsigned int id, lun;
- unsigned long serial;
+ int err;
qla2x00_block_error_handler(cmd);
- id = cmd->device->id;
- lun = cmd->device->lun;
- serial = cmd->serial_number;
-
if (!fcport)
- return ret;
+ return FAILED;
- qla_printk(KERN_INFO, ha,
- "scsi(%ld:%d:%d): DEVICE RESET ISSUED.\n", ha->host_no, id, lun);
+ qla_printk(KERN_INFO, ha, "scsi(%ld:%d:%d): %s RESET ISSUED.\n",
+ ha->host_no, cmd->device->id, cmd->device->lun, name);
+ err = 0;
if (qla2x00_wait_for_hba_online(ha) != QLA_SUCCESS)
- goto eh_dev_reset_done;
-
- if (qla2x00_wait_for_loop_ready(ha) == QLA_SUCCESS) {
- if (qla2x00_device_reset(ha, fcport) == 0)
- ret = SUCCESS;
-
-#if defined(LOGOUT_AFTER_DEVICE_RESET)
- if (ret == SUCCESS) {
- if (fcport->flags & FC_FABRIC_DEVICE) {
- ha->isp_ops->fabric_logout(ha, fcport->loop_id);
- qla2x00_mark_device_lost(ha, fcport, 0, 0);
- }
- }
-#endif
- } else {
- DEBUG2(printk(KERN_INFO
- "%s failed: loop not ready\n",__func__));
- }
-
- if (ret == FAILED) {
- DEBUG3(printk("%s(%ld): device reset failed\n",
- __func__, ha->host_no));
- qla_printk(KERN_INFO, ha, "%s: device reset failed\n",
- __func__);
+ goto eh_reset_failed;
+ err = 1;
+ if (qla2x00_wait_for_loop_ready(ha) != QLA_SUCCESS)
+ goto eh_reset_failed;
+ err = 2;
+ if (do_reset(fcport, cmd->device->lun) != QLA_SUCCESS)
+ goto eh_reset_failed;
+ err = 3;
+ if (qla2x00_eh_wait_for_pending_commands(ha, cmd->device->id,
+ cmd->device->lun, type) != QLA_SUCCESS)
+ goto eh_reset_failed;
+
+ qla_printk(KERN_INFO, ha, "scsi(%ld:%d:%d): %s RESET SUCCEEDED.\n",
+ ha->host_no, cmd->device->id, cmd->device->lun, name);
+
+ return SUCCESS;
+
+ eh_reset_failed:
+ qla_printk(KERN_INFO, ha, "scsi(%ld:%d:%d): %s RESET FAILED: %s.\n",
+ ha->host_no, cmd->device->id, cmd->device->lun, name,
+ reset_errors[err]);
+ return FAILED;
+}
- goto eh_dev_reset_done;
- }
+static int
+qla2xxx_eh_device_reset(struct scsi_cmnd *cmd)
+{
+ scsi_qla_host_t *ha = shost_priv(cmd->device->host);
- /* Flush outstanding commands. */
- if (qla2x00_eh_wait_for_pending_target_commands(ha, id))
- ret = FAILED;
- if (ret == FAILED) {
- DEBUG3(printk("%s(%ld): failed while waiting for commands\n",
- __func__, ha->host_no));
- qla_printk(KERN_INFO, ha,
- "%s: failed while waiting for commands\n", __func__);
- } else
- qla_printk(KERN_INFO, ha,
- "scsi(%ld:%d:%d): DEVICE RESET SUCCEEDED.\n", ha->host_no,
- id, lun);
- eh_dev_reset_done:
- return ret;
+ return __qla2xxx_eh_generic_reset("DEVICE", WAIT_LUN, cmd,
+ ha->isp_ops->lun_reset);
}
-/**************************************************************************
-* qla2x00_eh_wait_for_pending_commands
-*
-* Description:
-* Waits for all the commands to come back from the specified host.
-*
-* Input:
-* ha - pointer to scsi_qla_host structure.
-*
-* Returns:
-* 1 : SUCCESS
-* 0 : FAILED
-*
-* Note:
-**************************************************************************/
static int
-qla2x00_eh_wait_for_pending_commands(scsi_qla_host_t *ha)
+qla2xxx_eh_target_reset(struct scsi_cmnd *cmd)
{
- int cnt;
- int status;
- srb_t *sp;
- struct scsi_cmnd *cmd;
- unsigned long flags;
-
- status = 1;
+ scsi_qla_host_t *ha = shost_priv(cmd->device->host);
- /*
- * Waiting for all commands for the designated target in the active
- * array
- */
- for (cnt = 1; cnt < MAX_OUTSTANDING_COMMANDS; cnt++) {
- spin_lock_irqsave(&ha->hardware_lock, flags);
- sp = ha->outstanding_cmds[cnt];
- if (sp) {
- cmd = sp->cmd;
- spin_unlock_irqrestore(&ha->hardware_lock, flags);
- status = qla2x00_eh_wait_on_command(ha, cmd);
- if (status == 0)
- break;
- }
- else {
- spin_unlock_irqrestore(&ha->hardware_lock, flags);
- }
- }
- return (status);
+ return __qla2xxx_eh_generic_reset("TARGET", WAIT_TARGET, cmd,
+ ha->isp_ops->target_reset);
}
-
/**************************************************************************
* qla2xxx_eh_bus_reset
*
goto eh_bus_reset_done;
/* Flush outstanding commands. */
- if (!qla2x00_eh_wait_for_pending_commands(pha))
+ if (qla2x00_eh_wait_for_pending_commands(pha, 0, 0, WAIT_HOST) !=
+ QLA_SUCCESS)
ret = FAILED;
eh_bus_reset_done:
clear_bit(ABORT_ISP_ACTIVE, &pha->dpc_flags);
/* Waiting for our command in done_queue to be returned to OS.*/
- if (qla2x00_eh_wait_for_pending_commands(pha))
+ if (qla2x00_eh_wait_for_pending_commands(pha, 0, 0, WAIT_HOST) ==
+ QLA_SUCCESS)
ret = SUCCESS;
if (ha->parent)
if (fcport->port_type != FCT_TARGET)
continue;
- ret = qla2x00_device_reset(ha, fcport);
+ ret = ha->isp_ops->target_reset(fcport, 0);
if (ret != QLA_SUCCESS) {
DEBUG2_3(printk("%s(%ld): bus_reset failed: "
"target_reset=%d d_id=%x.\n", __func__,
return QLA_SUCCESS;
}
-/*
- * qla2x00_device_reset
- * Issue bus device reset message to the target.
- *
- * Input:
- * ha = adapter block pointer.
- * t = SCSI ID.
- * TARGET_QUEUE_LOCK must be released.
- * ADAPTER_STATE_LOCK must be released.
- *
- * Context:
- * Kernel context.
- */
-static int
-qla2x00_device_reset(scsi_qla_host_t *ha, fc_port_t *reset_fcport)
-{
- /* Abort Target command will clear Reservation */
- return ha->isp_ops->abort_target(reset_fcport);
-}
-
void
qla2x00_abort_all_cmds(scsi_qla_host_t *ha, int res)
{
.enable_intrs = qla2x00_enable_intrs,
.disable_intrs = qla2x00_disable_intrs,
.abort_command = qla2x00_abort_command,
- .abort_target = qla2x00_abort_target,
+ .target_reset = qla2x00_abort_target,
+ .lun_reset = qla2x00_lun_reset,
.fabric_login = qla2x00_login_fabric,
.fabric_logout = qla2x00_fabric_logout,
.calc_req_entries = qla2x00_calc_iocbs_32,
.enable_intrs = qla2x00_enable_intrs,
.disable_intrs = qla2x00_disable_intrs,
.abort_command = qla2x00_abort_command,
- .abort_target = qla2x00_abort_target,
+ .target_reset = qla2x00_abort_target,
+ .lun_reset = qla2x00_lun_reset,
.fabric_login = qla2x00_login_fabric,
.fabric_logout = qla2x00_fabric_logout,
.calc_req_entries = qla2x00_calc_iocbs_32,
.enable_intrs = qla24xx_enable_intrs,
.disable_intrs = qla24xx_disable_intrs,
.abort_command = qla24xx_abort_command,
- .abort_target = qla24xx_abort_target,
+ .target_reset = qla24xx_abort_target,
+ .lun_reset = qla24xx_lun_reset,
.fabric_login = qla24xx_login_fabric,
.fabric_logout = qla24xx_fabric_logout,
.calc_req_entries = NULL,
.enable_intrs = qla24xx_enable_intrs,
.disable_intrs = qla24xx_disable_intrs,
.abort_command = qla24xx_abort_command,
- .abort_target = qla24xx_abort_target,
+ .target_reset = qla24xx_abort_target,
+ .lun_reset = qla24xx_lun_reset,
.fabric_login = qla24xx_login_fabric,
.fabric_logout = qla24xx_fabric_logout,
.calc_req_entries = NULL,
ha->device_type |= DT_IIDMA;
ha->fw_srisc_address = RISC_START_ADDRESS_2400;
break;
+ case PCI_DEVICE_ID_QLOGIC_ISP8432:
+ ha->device_type |= DT_ISP8432;
+ ha->device_type |= DT_ZIO_SUPPORTED;
+ ha->device_type |= DT_FWI2;
+ ha->device_type |= DT_IIDMA;
+ ha->fw_srisc_address = RISC_START_ADDRESS_2400;
+ break;
case PCI_DEVICE_ID_QLOGIC_ISP5422:
ha->device_type |= DT_ISP5422;
ha->device_type |= DT_FWI2;
sht = &qla2x00_driver_template;
if (pdev->device == PCI_DEVICE_ID_QLOGIC_ISP2422 ||
pdev->device == PCI_DEVICE_ID_QLOGIC_ISP2432 ||
+ pdev->device == PCI_DEVICE_ID_QLOGIC_ISP8432 ||
pdev->device == PCI_DEVICE_ID_QLOGIC_ISP5422 ||
pdev->device == PCI_DEVICE_ID_QLOGIC_ISP5432 ||
pdev->device == PCI_DEVICE_ID_QLOGIC_ISP2532) {
if (IS_QLA2322(ha) || IS_QLA6322(ha))
ha->optrom_size = OPTROM_SIZE_2322;
ha->isp_ops = &qla2300_isp_ops;
- } else if (IS_QLA24XX(ha) || IS_QLA54XX(ha)) {
+ } else if (IS_QLA24XX_TYPE(ha)) {
host->max_id = MAX_TARGETS_2200;
ha->mbx_count = MAILBOX_REGISTER_COUNT;
ha->request_q_length = REQUEST_ENTRY_CNT_24XX;
ha->gid_list_info_size = 8;
ha->optrom_size = OPTROM_SIZE_25XX;
ha->isp_ops = &qla25xx_isp_ops;
+ ha->hw_event_start = PCI_FUNC(pdev->devfn) ?
+ FA_HW_EVENT1_ADDR: FA_HW_EVENT0_ADDR;
}
host->can_queue = ha->request_q_length + 128;
/* load the F/W, read paramaters, and init the H/W */
ha->instance = num_hosts;
- init_MUTEX(&ha->vport_sem);
+ mutex_init(&ha->vport_lock);
init_completion(&ha->mbx_cmd_comp);
complete(&ha->mbx_cmd_comp);
init_completion(&ha->mbx_intr_comp);
INIT_LIST_HEAD(&ha->list);
INIT_LIST_HEAD(&ha->fcports);
INIT_LIST_HEAD(&ha->vp_list);
+ INIT_LIST_HEAD(&ha->work_list);
set_bit(0, (unsigned long *) ha->vp_idx_map);
qla2x00_dfs_remove(ha);
+ qla84xx_put_chip(ha);
+
qla2x00_free_sysfs_attr(ha);
fc_remove_host(ha->host);
kfree(ha->nvram);
}
+static struct qla_work_evt *
+qla2x00_alloc_work(struct scsi_qla_host *ha, enum qla_work_type type,
+ int locked)
+{
+ struct qla_work_evt *e;
+
+ e = kzalloc(sizeof(struct qla_work_evt), locked ? GFP_ATOMIC:
+ GFP_KERNEL);
+ if (!e)
+ return NULL;
+
+ INIT_LIST_HEAD(&e->list);
+ e->type = type;
+ e->flags = QLA_EVT_FLAG_FREE;
+ return e;
+}
+
+static int
+qla2x00_post_work(struct scsi_qla_host *ha, struct qla_work_evt *e, int locked)
+{
+ unsigned long flags;
+ scsi_qla_host_t *pha = to_qla_parent(ha);
+
+ if (!locked)
+ spin_lock_irqsave(&pha->hardware_lock, flags);
+ list_add_tail(&e->list, &ha->work_list);
+ qla2xxx_wake_dpc(ha);
+ if (!locked)
+ spin_unlock_irqrestore(&pha->hardware_lock, flags);
+ return QLA_SUCCESS;
+}
+
+int
+qla2x00_post_aen_work(struct scsi_qla_host *ha, enum fc_host_event_code code,
+ u32 data)
+{
+ struct qla_work_evt *e;
+
+ e = qla2x00_alloc_work(ha, QLA_EVT_AEN, 1);
+ if (!e)
+ return QLA_FUNCTION_FAILED;
+
+ e->u.aen.code = code;
+ e->u.aen.data = data;
+ return qla2x00_post_work(ha, e, 1);
+}
+
+int
+qla2x00_post_hwe_work(struct scsi_qla_host *ha, uint16_t code, uint16_t d1,
+ uint16_t d2, uint16_t d3)
+{
+ struct qla_work_evt *e;
+
+ e = qla2x00_alloc_work(ha, QLA_EVT_HWE_LOG, 1);
+ if (!e)
+ return QLA_FUNCTION_FAILED;
+
+ e->u.hwe.code = code;
+ e->u.hwe.d1 = d1;
+ e->u.hwe.d2 = d2;
+ e->u.hwe.d3 = d3;
+ return qla2x00_post_work(ha, e, 1);
+}
+
+static void
+qla2x00_do_work(struct scsi_qla_host *ha)
+{
+ struct qla_work_evt *e;
+ scsi_qla_host_t *pha = to_qla_parent(ha);
+
+ spin_lock_irq(&pha->hardware_lock);
+ while (!list_empty(&ha->work_list)) {
+ e = list_entry(ha->work_list.next, struct qla_work_evt, list);
+ list_del_init(&e->list);
+ spin_unlock_irq(&pha->hardware_lock);
+
+ switch (e->type) {
+ case QLA_EVT_AEN:
+ fc_host_post_event(ha->host, fc_get_event_number(),
+ e->u.aen.code, e->u.aen.data);
+ break;
+ case QLA_EVT_HWE_LOG:
+ qla2xxx_hw_event_log(ha, e->u.hwe.code, e->u.hwe.d1,
+ e->u.hwe.d2, e->u.hwe.d3);
+ break;
+ }
+ if (e->flags & QLA_EVT_FLAG_FREE)
+ kfree(e);
+ spin_lock_irq(&pha->hardware_lock);
+ }
+ spin_unlock_irq(&pha->hardware_lock);
+}
+
/**************************************************************************
* qla2x00_do_dpc
* This kernel thread is a task that is schedule by the interrupt handler
continue;
}
+ qla2x00_do_work(ha);
+
if (test_and_clear_bit(ISP_ABORT_NEEDED, &ha->dpc_flags)) {
DEBUG(printk("scsi(%ld): dpc: sched "
if (test_and_clear_bit(FCPORT_UPDATE_NEEDED, &ha->dpc_flags))
qla2x00_update_fcports(ha);
- if (test_and_clear_bit(LOOP_RESET_NEEDED, &ha->dpc_flags)) {
- DEBUG(printk("scsi(%ld): dpc: sched loop_reset()\n",
- ha->host_no));
- qla2x00_loop_reset(ha);
- }
-
if (test_and_clear_bit(RESET_MARKER_NEEDED, &ha->dpc_flags) &&
(!(test_and_set_bit(RESET_ACTIVE, &ha->dpc_flags)))) {
} else {
fcport->login_retry = 0;
}
- if (fcport->login_retry == 0)
+ if (fcport->login_retry == 0 && status != QLA_SUCCESS)
fcport->loop_id = FC_NO_LOOP_ID;
}
if (test_bit(LOOP_RESYNC_NEEDED, &ha->dpc_flags))
ha->host_no));
}
- if ((test_bit(LOGIN_RETRY_NEEDED, &ha->dpc_flags)) &&
- atomic_read(&ha->loop_state) != LOOP_DOWN) {
-
- clear_bit(LOGIN_RETRY_NEEDED, &ha->dpc_flags);
- DEBUG(printk("scsi(%ld): qla2x00_login_retry()\n",
- ha->host_no));
-
- set_bit(LOOP_RESYNC_NEEDED, &ha->dpc_flags);
-
- DEBUG(printk("scsi(%ld): qla2x00_login_retry - end\n",
- ha->host_no));
- }
-
if (test_and_clear_bit(LOOP_RESYNC_NEEDED, &ha->dpc_flags)) {
DEBUG(printk("scsi(%ld): qla2x00_loop_resync()\n",
ha->host_no));
}
- if (test_and_clear_bit(FCPORT_RESCAN_NEEDED, &ha->dpc_flags)) {
-
- DEBUG(printk("scsi(%ld): Rescan flagged fcports...\n",
- ha->host_no));
-
- qla2x00_rescan_fcports(ha);
-
- DEBUG(printk("scsi(%ld): Rescan flagged fcports..."
- "end.\n",
- ha->host_no));
- }
-
if (!ha->interrupts_on)
ha->isp_ops->enable_intrs(ha);
set_bit(RESTART_QUEUES_NEEDED, &ha->dpc_flags);
start_dpc++;
- if (!(ha->device_flags & DFLG_NO_CABLE)) {
+ if (!(ha->device_flags & DFLG_NO_CABLE) &&
+ !ha->parent) {
DEBUG(printk("scsi(%ld): Loop down - "
"aborting ISP.\n",
ha->host_no));
start_dpc++;
}
+ /* Process any deferred work. */
+ if (!list_empty(&ha->work_list))
+ start_dpc++;
+
/* Schedule the DPC routine if needed */
if ((test_bit(ISP_ABORT_NEEDED, &ha->dpc_flags) ||
test_bit(LOOP_RESYNC_NEEDED, &ha->dpc_flags) ||
- test_bit(LOOP_RESET_NEEDED, &ha->dpc_flags) ||
test_bit(FCPORT_UPDATE_NEEDED, &ha->dpc_flags) ||
start_dpc ||
- test_bit(LOGIN_RETRY_NEEDED, &ha->dpc_flags) ||
test_bit(RESET_MARKER_NEEDED, &ha->dpc_flags) ||
test_bit(BEACON_BLINK_NEEDED, &ha->dpc_flags) ||
test_bit(VP_DPC_NEEDED, &ha->dpc_flags) ||
#define FW_FILE_ISP24XX "ql2400_fw.bin"
#define FW_FILE_ISP25XX "ql2500_fw.bin"
-static DECLARE_MUTEX(qla_fw_lock);
+static DEFINE_MUTEX(qla_fw_lock);
static struct fw_blob qla_fw_blobs[FW_BLOBS] = {
{ .name = FW_FILE_ISP21XX, .segs = { 0x1000, 0 }, },
blob = &qla_fw_blobs[FW_ISP2300];
} else if (IS_QLA2322(ha) || IS_QLA6322(ha)) {
blob = &qla_fw_blobs[FW_ISP2322];
- } else if (IS_QLA24XX(ha) || IS_QLA54XX(ha)) {
+ } else if (IS_QLA24XX_TYPE(ha)) {
blob = &qla_fw_blobs[FW_ISP24XX];
} else if (IS_QLA25XX(ha)) {
blob = &qla_fw_blobs[FW_ISP25XX];
}
- down(&qla_fw_lock);
+ mutex_lock(&qla_fw_lock);
if (blob->fw)
goto out;
}
out:
- up(&qla_fw_lock);
+ mutex_unlock(&qla_fw_lock);
return blob;
}
{
int idx;
- down(&qla_fw_lock);
+ mutex_lock(&qla_fw_lock);
for (idx = 0; idx < FW_BLOBS; idx++)
if (qla_fw_blobs[idx].fw)
release_firmware(qla_fw_blobs[idx].fw);
- up(&qla_fw_lock);
+ mutex_unlock(&qla_fw_lock);
}
static pci_ers_result_t
{ PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP6322) },
{ PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP2422) },
{ PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP2432) },
+ { PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP8432) },
{ PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP5422) },
{ PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP5432) },
{ PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP2532) },
return -ENODEV;
}
- printk(KERN_INFO "QLogic Fibre Channel HBA Driver\n");
+ printk(KERN_INFO "QLogic Fibre Channel HBA Driver: %s\n",
+ qla2x00_version_str);
ret = pci_register_driver(&qla2xxx_pci_driver);
if (ret) {
kmem_cache_destroy(srb_cachep);
projects / linux-2.6 / blobdiff