#include "libata.h"
-typedef unsigned int (*ata_xlat_func_t)(struct ata_queued_cmd *qc, u8 *scsicmd);
+typedef unsigned int (*ata_xlat_func_t)(struct ata_queued_cmd *qc, const u8 *scsicmd);
static struct ata_device *
-ata_scsi_find_dev(struct ata_port *ap, struct scsi_device *scsidev);
+ata_scsi_find_dev(struct ata_port *ap, const struct scsi_device *scsidev);
+static void ata_scsi_invalid_field(struct scsi_cmnd *cmd,
+ void (*done)(struct scsi_cmnd *))
+{
+ ata_scsi_set_sense(cmd, ILLEGAL_REQUEST, 0x24, 0x0);
+ /* "Invalid field in cbd" */
+ done(cmd);
+}
+
/**
* ata_std_bios_param - generic bios head/sector/cylinder calculator used by sd.
* @sdev: SCSI device for which BIOS geometry is to be determined
{
struct scsi_cmnd *cmd = qc->scsicmd;
u8 err = 0;
- unsigned char *sb = cmd->sense_buffer;
/* Based on the 3ware driver translation table */
static unsigned char sense_table[][4] = {
/* BBD|ECC|ID|MAR */
};
int i = 0;
- cmd->result = SAM_STAT_CHECK_CONDITION;
-
/*
* Is this an error we can process/parse
*/
/* Look for best matches first */
if((sense_table[i][0] & err) == sense_table[i][0])
{
- sb[0] = 0x70;
- sb[2] = sense_table[i][1];
- sb[7] = 0x0a;
- sb[12] = sense_table[i][2];
- sb[13] = sense_table[i][3];
+ ata_scsi_set_sense(cmd, sense_table[i][1] /* sk */,
+ sense_table[i][2] /* asc */,
+ sense_table[i][3] /* ascq */ );
return;
}
i++;
{
if(stat_table[i][0] & drv_stat)
{
- sb[0] = 0x70;
- sb[2] = stat_table[i][1];
- sb[7] = 0x0a;
- sb[12] = stat_table[i][2];
- sb[13] = stat_table[i][3];
+ ata_scsi_set_sense(cmd, sense_table[i][1] /* sk */,
+ sense_table[i][2] /* asc */,
+ sense_table[i][3] /* ascq */ );
return;
}
i++;
printk(KERN_ERR "ata%u: called with no error (%02X)!\n", qc->ap->id, drv_stat);
/* additional-sense-code[-qualifier] */
- sb[0] = 0x70;
- sb[2] = MEDIUM_ERROR;
- sb[7] = 0x0A;
if (cmd->sc_data_direction == DMA_FROM_DEVICE) {
- sb[12] = 0x11; /* "unrecovered read error" */
- sb[13] = 0x04;
+ ata_scsi_set_sense(cmd, MEDIUM_ERROR, 0x11, 0x4);
+ /* "unrecovered read error" */
} else {
- sb[12] = 0x0C; /* "write error - */
- sb[13] = 0x02; /* auto-reallocation failed" */
+ ata_scsi_set_sense(cmd, MEDIUM_ERROR, 0xc, 0x2);
+ /* "write error - auto-reallocation failed" */
}
}
*/
static unsigned int ata_scsi_start_stop_xlat(struct ata_queued_cmd *qc,
- u8 *scsicmd)
+ const u8 *scsicmd)
{
struct ata_taskfile *tf = &qc->tf;
; /* ignore IMMED bit, violates sat-r05 */
}
if (scsicmd[4] & 0x2)
- return 1; /* LOEJ bit set not supported */
+ goto invalid_fld; /* LOEJ bit set not supported */
if (((scsicmd[4] >> 4) & 0xf) != 0)
- return 1; /* power conditions not supported */
+ goto invalid_fld; /* power conditions not supported */
if (scsicmd[4] & 0x1) {
tf->nsect = 1; /* 1 sector, lba=0 */
- tf->lbah = 0x0;
- tf->lbam = 0x0;
- tf->lbal = 0x0;
- tf->device |= ATA_LBA;
+
+ if (qc->dev->flags & ATA_DFLAG_LBA) {
+ qc->tf.flags |= ATA_TFLAG_LBA;
+
+ tf->lbah = 0x0;
+ tf->lbam = 0x0;
+ tf->lbal = 0x0;
+ tf->device |= ATA_LBA;
+ } else {
+ /* CHS */
+ tf->lbal = 0x1; /* sect */
+ tf->lbam = 0x0; /* cyl low */
+ tf->lbah = 0x0; /* cyl high */
+ }
+
tf->command = ATA_CMD_VERIFY; /* READ VERIFY */
} else {
tf->nsect = 0; /* time period value (0 implies now) */
*/
return 0;
+
+invalid_fld:
+ ata_scsi_set_sense(qc->scsicmd, ILLEGAL_REQUEST, 0x24, 0x0);
+ /* "Invalid field in cbd" */
+ return 1;
}
* Zero on success, non-zero on error.
*/
-static unsigned int ata_scsi_flush_xlat(struct ata_queued_cmd *qc, u8 *scsicmd)
+static unsigned int ata_scsi_flush_xlat(struct ata_queued_cmd *qc, const u8 *scsicmd)
{
struct ata_taskfile *tf = &qc->tf;
tf->flags |= ATA_TFLAG_DEVICE;
tf->protocol = ATA_PROT_NODATA;
- if ((tf->flags & ATA_TFLAG_LBA48) &&
+ if ((qc->dev->flags & ATA_DFLAG_LBA48) &&
(ata_id_has_flush_ext(qc->dev->id)))
tf->command = ATA_CMD_FLUSH_EXT;
else
return 0;
}
+/**
+ * scsi_6_lba_len - Get LBA and transfer length
+ * @scsicmd: SCSI command to translate
+ *
+ * Calculate LBA and transfer length for 6-byte commands.
+ *
+ * RETURNS:
+ * @plba: the LBA
+ * @plen: the transfer length
+ */
+
+static void scsi_6_lba_len(const u8 *scsicmd, u64 *plba, u32 *plen)
+{
+ u64 lba = 0;
+ u32 len = 0;
+
+ VPRINTK("six-byte command\n");
+
+ lba |= ((u64)scsicmd[2]) << 8;
+ lba |= ((u64)scsicmd[3]);
+
+ len |= ((u32)scsicmd[4]);
+
+ *plba = lba;
+ *plen = len;
+}
+
+/**
+ * scsi_10_lba_len - Get LBA and transfer length
+ * @scsicmd: SCSI command to translate
+ *
+ * Calculate LBA and transfer length for 10-byte commands.
+ *
+ * RETURNS:
+ * @plba: the LBA
+ * @plen: the transfer length
+ */
+
+static void scsi_10_lba_len(const u8 *scsicmd, u64 *plba, u32 *plen)
+{
+ u64 lba = 0;
+ u32 len = 0;
+
+ VPRINTK("ten-byte command\n");
+
+ lba |= ((u64)scsicmd[2]) << 24;
+ lba |= ((u64)scsicmd[3]) << 16;
+ lba |= ((u64)scsicmd[4]) << 8;
+ lba |= ((u64)scsicmd[5]);
+
+ len |= ((u32)scsicmd[7]) << 8;
+ len |= ((u32)scsicmd[8]);
+
+ *plba = lba;
+ *plen = len;
+}
+
+/**
+ * scsi_16_lba_len - Get LBA and transfer length
+ * @scsicmd: SCSI command to translate
+ *
+ * Calculate LBA and transfer length for 16-byte commands.
+ *
+ * RETURNS:
+ * @plba: the LBA
+ * @plen: the transfer length
+ */
+
+static void scsi_16_lba_len(const u8 *scsicmd, u64 *plba, u32 *plen)
+{
+ u64 lba = 0;
+ u32 len = 0;
+
+ VPRINTK("sixteen-byte command\n");
+
+ lba |= ((u64)scsicmd[2]) << 56;
+ lba |= ((u64)scsicmd[3]) << 48;
+ lba |= ((u64)scsicmd[4]) << 40;
+ lba |= ((u64)scsicmd[5]) << 32;
+ lba |= ((u64)scsicmd[6]) << 24;
+ lba |= ((u64)scsicmd[7]) << 16;
+ lba |= ((u64)scsicmd[8]) << 8;
+ lba |= ((u64)scsicmd[9]);
+
+ len |= ((u32)scsicmd[10]) << 24;
+ len |= ((u32)scsicmd[11]) << 16;
+ len |= ((u32)scsicmd[12]) << 8;
+ len |= ((u32)scsicmd[13]);
+
+ *plba = lba;
+ *plen = len;
+}
+
/**
* ata_scsi_verify_xlat - Translate SCSI VERIFY command into an ATA one
* @qc: Storage for translated ATA taskfile
* Zero on success, non-zero on error.
*/
-static unsigned int ata_scsi_verify_xlat(struct ata_queued_cmd *qc, u8 *scsicmd)
+static unsigned int ata_scsi_verify_xlat(struct ata_queued_cmd *qc, const u8 *scsicmd)
{
struct ata_taskfile *tf = &qc->tf;
struct ata_device *dev = qc->dev;
- unsigned int lba = tf->flags & ATA_TFLAG_LBA;
- unsigned int lba48 = tf->flags & ATA_TFLAG_LBA48;
u64 dev_sectors = qc->dev->n_sectors;
- u64 block = 0;
- u32 n_block = 0;
+ u64 block;
+ u32 n_block;
tf->flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE;
tf->protocol = ATA_PROT_NODATA;
- if (scsicmd[0] == VERIFY) {
- block |= ((u64)scsicmd[2]) << 24;
- block |= ((u64)scsicmd[3]) << 16;
- block |= ((u64)scsicmd[4]) << 8;
- block |= ((u64)scsicmd[5]);
-
- n_block |= ((u32)scsicmd[7]) << 8;
- n_block |= ((u32)scsicmd[8]);
- }
-
- else if (scsicmd[0] == VERIFY_16) {
- block |= ((u64)scsicmd[2]) << 56;
- block |= ((u64)scsicmd[3]) << 48;
- block |= ((u64)scsicmd[4]) << 40;
- block |= ((u64)scsicmd[5]) << 32;
- block |= ((u64)scsicmd[6]) << 24;
- block |= ((u64)scsicmd[7]) << 16;
- block |= ((u64)scsicmd[8]) << 8;
- block |= ((u64)scsicmd[9]);
-
- n_block |= ((u32)scsicmd[10]) << 24;
- n_block |= ((u32)scsicmd[11]) << 16;
- n_block |= ((u32)scsicmd[12]) << 8;
- n_block |= ((u32)scsicmd[13]);
- }
-
+ if (scsicmd[0] == VERIFY)
+ scsi_10_lba_len(scsicmd, &block, &n_block);
+ else if (scsicmd[0] == VERIFY_16)
+ scsi_16_lba_len(scsicmd, &block, &n_block);
else
- return 1;
+ goto invalid_fld;
if (!n_block)
- return 1;
+ goto nothing_to_do;
if (block >= dev_sectors)
- return 1;
+ goto out_of_range;
if ((block + n_block) > dev_sectors)
- return 1;
- if (lba48) {
- if (n_block > (64 * 1024))
- return 1;
- } else {
- if (n_block > 256)
- return 1;
- }
+ goto out_of_range;
- if (lba) {
- if (lba48) {
+ if (dev->flags & ATA_DFLAG_LBA) {
+ tf->flags |= ATA_TFLAG_LBA;
+
+ if (dev->flags & ATA_DFLAG_LBA48) {
+ if (n_block > (64 * 1024))
+ goto invalid_fld;
+
+ /* use LBA48 */
+ tf->flags |= ATA_TFLAG_LBA48;
tf->command = ATA_CMD_VERIFY_EXT;
tf->hob_nsect = (n_block >> 8) & 0xff;
tf->hob_lbam = (block >> 32) & 0xff;
tf->hob_lbal = (block >> 24) & 0xff;
} else {
+ if (n_block > 256)
+ goto invalid_fld;
+
+ /* use LBA28 */
tf->command = ATA_CMD_VERIFY;
tf->device |= (block >> 24) & 0xf;
/* CHS */
u32 sect, head, cyl, track;
+ if (n_block > 256)
+ goto invalid_fld;
+
/* Convert LBA to CHS */
track = (u32)block / dev->sectors;
cyl = track / dev->heads;
head = track % dev->heads;
sect = (u32)block % dev->sectors + 1;
- DPRINTK("block[%u] track[%u] cyl[%u] head[%u] sect[%u] \n", (u32)block, track, cyl, head, sect);
+ DPRINTK("block %u track %u cyl %u head %u sect %u\n",
+ (u32)block, track, cyl, head, sect);
/* Check whether the converted CHS can fit.
Cylinder: 0-65535
Head: 0-15
Sector: 1-255*/
if ((cyl >> 16) || (head >> 4) || (sect >> 8) || (!sect))
- return 1;
+ goto out_of_range;
tf->command = ATA_CMD_VERIFY;
tf->nsect = n_block & 0xff; /* Sector count 0 means 256 sectors */
}
return 0;
+
+invalid_fld:
+ ata_scsi_set_sense(qc->scsicmd, ILLEGAL_REQUEST, 0x24, 0x0);
+ /* "Invalid field in cbd" */
+ return 1;
+
+out_of_range:
+ ata_scsi_set_sense(qc->scsicmd, ILLEGAL_REQUEST, 0x21, 0x0);
+ /* "Logical Block Address out of range" */
+ return 1;
+
+nothing_to_do:
+ qc->scsicmd->result = SAM_STAT_GOOD;
+ return 1;
}
/**
* Zero on success, non-zero on error.
*/
-static unsigned int ata_scsi_rw_xlat(struct ata_queued_cmd *qc, u8 *scsicmd)
+static unsigned int ata_scsi_rw_xlat(struct ata_queued_cmd *qc, const u8 *scsicmd)
{
struct ata_taskfile *tf = &qc->tf;
struct ata_device *dev = qc->dev;
- unsigned int lba = tf->flags & ATA_TFLAG_LBA;
- unsigned int lba48 = tf->flags & ATA_TFLAG_LBA48;
- u64 block = 0;
- u32 n_block = 0;
+ u64 block;
+ u32 n_block;
tf->flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE;
- tf->protocol = qc->dev->xfer_protocol;
- if (scsicmd[0] == READ_10 || scsicmd[0] == READ_6 ||
- scsicmd[0] == READ_16) {
- tf->command = qc->dev->read_cmd;
- } else {
- tf->command = qc->dev->write_cmd;
+ if (scsicmd[0] == WRITE_10 || scsicmd[0] == WRITE_6 ||
+ scsicmd[0] == WRITE_16)
tf->flags |= ATA_TFLAG_WRITE;
- }
/* Calculate the SCSI LBA and transfer length. */
- if (scsicmd[0] == READ_10 || scsicmd[0] == WRITE_10) {
- block |= ((u64)scsicmd[2]) << 24;
- block |= ((u64)scsicmd[3]) << 16;
- block |= ((u64)scsicmd[4]) << 8;
- block |= ((u64)scsicmd[5]);
-
- n_block |= ((u32)scsicmd[7]) << 8;
- n_block |= ((u32)scsicmd[8]);
-
- VPRINTK("ten-byte command\n");
- } else if (scsicmd[0] == READ_6 || scsicmd[0] == WRITE_6) {
- block |= ((u64)scsicmd[2]) << 8;
- block |= ((u64)scsicmd[3]);
+ switch (scsicmd[0]) {
+ case READ_10:
+ case WRITE_10:
+ scsi_10_lba_len(scsicmd, &block, &n_block);
+ break;
+ case READ_6:
+ case WRITE_6:
+ scsi_6_lba_len(scsicmd, &block, &n_block);
- n_block |= ((u32)scsicmd[4]);
+ /* for 6-byte r/w commands, transfer length 0
+ * means 256 blocks of data, not 0 block.
+ */
if (!n_block)
n_block = 256;
-
- VPRINTK("six-byte command\n");
- } else if (scsicmd[0] == READ_16 || scsicmd[0] == WRITE_16) {
- block |= ((u64)scsicmd[2]) << 56;
- block |= ((u64)scsicmd[3]) << 48;
- block |= ((u64)scsicmd[4]) << 40;
- block |= ((u64)scsicmd[5]) << 32;
- block |= ((u64)scsicmd[6]) << 24;
- block |= ((u64)scsicmd[7]) << 16;
- block |= ((u64)scsicmd[8]) << 8;
- block |= ((u64)scsicmd[9]);
-
- n_block |= ((u32)scsicmd[10]) << 24;
- n_block |= ((u32)scsicmd[11]) << 16;
- n_block |= ((u32)scsicmd[12]) << 8;
- n_block |= ((u32)scsicmd[13]);
-
- VPRINTK("sixteen-byte command\n");
- } else {
+ break;
+ case READ_16:
+ case WRITE_16:
+ scsi_16_lba_len(scsicmd, &block, &n_block);
+ break;
+ default:
DPRINTK("no-byte command\n");
- return 1;
+ goto invalid_fld;
}
/* Check and compose ATA command */
if (!n_block)
- /* In ATA, sector count 0 means 256 or 65536 sectors, not 0 sectors. */
- return 1;
+ /* For 10-byte and 16-byte SCSI R/W commands, transfer
+ * length 0 means transfer 0 block of data.
+ * However, for ATA R/W commands, sector count 0 means
+ * 256 or 65536 sectors, not 0 sectors as in SCSI.
+ */
+ goto nothing_to_do;
+
+ if (dev->flags & ATA_DFLAG_LBA) {
+ tf->flags |= ATA_TFLAG_LBA;
- if (lba) {
- if (lba48) {
+ if (dev->flags & ATA_DFLAG_LBA48) {
/* The request -may- be too large for LBA48. */
if ((block >> 48) || (n_block > 65536))
- return 1;
+ goto out_of_range;
+
+ /* use LBA48 */
+ tf->flags |= ATA_TFLAG_LBA48;
tf->hob_nsect = (n_block >> 8) & 0xff;
tf->hob_lbam = (block >> 32) & 0xff;
tf->hob_lbal = (block >> 24) & 0xff;
} else {
- /* LBA28 */
+ /* use LBA28 */
/* The request -may- be too large for LBA28. */
if ((block >> 28) || (n_block > 256))
- return 1;
+ goto out_of_range;
tf->device |= (block >> 24) & 0xf;
}
-
+
+ ata_rwcmd_protocol(qc);
+
qc->nsect = n_block;
tf->nsect = n_block & 0xff;
/* The request -may- be too large for CHS addressing. */
if ((block >> 28) || (n_block > 256))
- return 1;
-
+ goto out_of_range;
+
+ ata_rwcmd_protocol(qc);
+
/* Convert LBA to CHS */
track = (u32)block / dev->sectors;
cyl = track / dev->heads;
head = track % dev->heads;
sect = (u32)block % dev->sectors + 1;
- DPRINTK("block[%u] track[%u] cyl[%u] head[%u] sect[%u] \n",
+ DPRINTK("block %u track %u cyl %u head %u sect %u\n",
(u32)block, track, cyl, head, sect);
-
+
/* Check whether the converted CHS can fit.
Cylinder: 0-65535
Head: 0-15
Sector: 1-255*/
- if ((cyl >> 16) || (head >> 4) || (sect >> 8) || (!sect))
- return 1;
-
+ if ((cyl >> 16) || (head >> 4) || (sect >> 8) || (!sect))
+ goto out_of_range;
+
qc->nsect = n_block;
tf->nsect = n_block & 0xff; /* Sector count 0 means 256 sectors */
tf->lbal = sect;
}
return 0;
+
+invalid_fld:
+ ata_scsi_set_sense(qc->scsicmd, ILLEGAL_REQUEST, 0x24, 0x0);
+ /* "Invalid field in cbd" */
+ return 1;
+
+out_of_range:
+ ata_scsi_set_sense(qc->scsicmd, ILLEGAL_REQUEST, 0x21, 0x0);
+ /* "Logical Block Address out of range" */
+ return 1;
+
+nothing_to_do:
+ qc->scsicmd->result = SAM_STAT_GOOD;
+ return 1;
}
static int ata_scsi_qc_complete(struct ata_queued_cmd *qc, u8 drv_stat)
* This function sets up an ata_queued_cmd structure for the
* SCSI command, and sends that ata_queued_cmd to the hardware.
*
+ * The xlat_func argument (actor) returns 0 if ready to execute
+ * ATA command, else 1 to finish translation. If 1 is returned
+ * then cmd->result (and possibly cmd->sense_buffer) are assumed
+ * to be set reflecting an error condition or clean (early)
+ * termination.
+ *
* LOCKING:
* spin_lock_irqsave(host_set lock)
*/
qc = ata_scsi_qc_new(ap, dev, cmd, done);
if (!qc)
- return;
+ goto err_mem;
/* data is present; dma-map it */
if (cmd->sc_data_direction == DMA_FROM_DEVICE ||
if (unlikely(cmd->request_bufflen < 1)) {
printk(KERN_WARNING "ata%u(%u): WARNING: zero len r/w req\n",
ap->id, dev->devno);
- goto err_out;
+ goto err_did;
}
if (cmd->use_sg)
qc->complete_fn = ata_scsi_qc_complete;
if (xlat_func(qc, scsicmd))
- goto err_out;
+ goto early_finish;
/* select device, send command to hardware */
if (ata_qc_issue(qc))
- goto err_out;
+ goto err_did;
VPRINTK("EXIT\n");
return;
-err_out:
+early_finish:
+ ata_qc_free(qc);
+ done(cmd);
+ DPRINTK("EXIT - early finish (good or error)\n");
+ return;
+
+err_did:
ata_qc_free(qc);
- ata_bad_cdb(cmd, done);
- DPRINTK("EXIT - badcmd\n");
+err_mem:
+ cmd->result = (DID_ERROR << 16);
+ done(cmd);
+ DPRINTK("EXIT - internal\n");
+ return;
}
/**
* Mapping the response buffer, calling the command's handler,
* and handling the handler's return value. This return value
* indicates whether the handler wishes the SCSI command to be
- * completed successfully, or not.
+ * completed successfully (0), or not (in which case cmd->result
+ * and sense buffer are assumed to be set).
*
* LOCKING:
* spin_lock_irqsave(host_set lock)
rc = actor(args, rbuf, buflen);
ata_scsi_rbuf_put(cmd, rbuf);
- if (rc)
- ata_bad_cdb(cmd, args->done);
- else {
+ if (rc == 0)
cmd->result = SAM_STAT_GOOD;
- args->done(cmd);
- }
+ args->done(cmd);
}
/**
* in the same manner)
*/
page_control = scsicmd[2] >> 6;
- if ((page_control != 0) && (page_control != 3))
- return 1;
+ switch (page_control) {
+ case 0: /* current */
+ break; /* supported */
+ case 3: /* saved */
+ goto saving_not_supp;
+ case 1: /* changeable */
+ case 2: /* defaults */
+ default:
+ goto invalid_fld;
+ }
if (six_byte)
output_len = 4;
break;
default: /* invalid page code */
- return 1;
+ goto invalid_fld;
}
if (six_byte) {
}
return 0;
+
+invalid_fld:
+ ata_scsi_set_sense(args->cmd, ILLEGAL_REQUEST, 0x24, 0x0);
+ /* "Invalid field in cbd" */
+ return 1;
+
+saving_not_supp:
+ ata_scsi_set_sense(args->cmd, ILLEGAL_REQUEST, 0x39, 0x0);
+ /* "Saving parameters not supported" */
+ return 1;
}
/**
return 0;
}
+/**
+ * ata_scsi_set_sense - Set SCSI sense data and status
+ * @cmd: SCSI request to be handled
+ * @sk: SCSI-defined sense key
+ * @asc: SCSI-defined additional sense code
+ * @ascq: SCSI-defined additional sense code qualifier
+ *
+ * Helper function that builds a valid fixed format, current
+ * response code and the given sense key (sk), additional sense
+ * code (asc) and additional sense code qualifier (ascq) with
+ * a SCSI command status of %SAM_STAT_CHECK_CONDITION and
+ * DRIVER_SENSE set in the upper bits of scsi_cmnd::result .
+ *
+ * LOCKING:
+ * Not required
+ */
+
+void ata_scsi_set_sense(struct scsi_cmnd *cmd, u8 sk, u8 asc, u8 ascq)
+{
+ cmd->result = (DRIVER_SENSE << 24) | SAM_STAT_CHECK_CONDITION;
+
+ cmd->sense_buffer[0] = 0x70; /* fixed format, current */
+ cmd->sense_buffer[2] = sk;
+ cmd->sense_buffer[7] = 18 - 8; /* additional sense length */
+ cmd->sense_buffer[12] = asc;
+ cmd->sense_buffer[13] = ascq;
+}
+
/**
* ata_scsi_badcmd - End a SCSI request with an error
* @cmd: SCSI request to be handled
void ata_scsi_badcmd(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *), u8 asc, u8 ascq)
{
DPRINTK("ENTER\n");
- cmd->result = SAM_STAT_CHECK_CONDITION;
-
- cmd->sense_buffer[0] = 0x70;
- cmd->sense_buffer[2] = ILLEGAL_REQUEST;
- cmd->sense_buffer[7] = 14 - 8; /* addnl. sense len. FIXME: correct? */
- cmd->sense_buffer[12] = asc;
- cmd->sense_buffer[13] = ascq;
+ ata_scsi_set_sense(cmd, ILLEGAL_REQUEST, asc, ascq);
done(cmd);
}
+void atapi_request_sense(struct ata_port *ap, struct ata_device *dev,
+ struct scsi_cmnd *cmd)
+{
+ DECLARE_COMPLETION(wait);
+ struct ata_queued_cmd *qc;
+ unsigned long flags;
+ int rc;
+
+ DPRINTK("ATAPI request sense\n");
+
+ qc = ata_qc_new_init(ap, dev);
+ BUG_ON(qc == NULL);
+
+ /* FIXME: is this needed? */
+ memset(cmd->sense_buffer, 0, sizeof(cmd->sense_buffer));
+
+ ata_sg_init_one(qc, cmd->sense_buffer, sizeof(cmd->sense_buffer));
+ qc->dma_dir = DMA_FROM_DEVICE;
+
+ memset(&qc->cdb, 0, ap->cdb_len);
+ qc->cdb[0] = REQUEST_SENSE;
+ qc->cdb[4] = SCSI_SENSE_BUFFERSIZE;
+
+ qc->tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE;
+ qc->tf.command = ATA_CMD_PACKET;
+
+ qc->tf.protocol = ATA_PROT_ATAPI;
+ qc->tf.lbam = (8 * 1024) & 0xff;
+ qc->tf.lbah = (8 * 1024) >> 8;
+ qc->nbytes = SCSI_SENSE_BUFFERSIZE;
+
+ qc->waiting = &wait;
+ qc->complete_fn = ata_qc_complete_noop;
+
+ spin_lock_irqsave(&ap->host_set->lock, flags);
+ rc = ata_qc_issue(qc);
+ spin_unlock_irqrestore(&ap->host_set->lock, flags);
+
+ if (rc)
+ ata_port_disable(ap);
+ else
+ wait_for_completion(&wait);
+
+ DPRINTK("EXIT\n");
+}
+
static int atapi_qc_complete(struct ata_queued_cmd *qc, u8 drv_stat)
{
struct scsi_cmnd *cmd = qc->scsicmd;
- if (unlikely(drv_stat & (ATA_ERR | ATA_BUSY | ATA_DRQ))) {
+ VPRINTK("ENTER, drv_stat == 0x%x\n", drv_stat);
+
+ if (unlikely(drv_stat & (ATA_BUSY | ATA_DRQ)))
+ ata_to_sense_error(qc, drv_stat);
+
+ else if (unlikely(drv_stat & ATA_ERR)) {
DPRINTK("request check condition\n");
+ /* FIXME: command completion with check condition
+ * but no sense causes the error handler to run,
+ * which then issues REQUEST SENSE, fills in the sense
+ * buffer, and completes the command (for the second
+ * time). We need to issue REQUEST SENSE some other
+ * way, to avoid completing the command twice.
+ */
cmd->result = SAM_STAT_CHECK_CONDITION;
qc->scsidone(cmd);
return 1;
- } else {
+ }
+
+ else {
u8 *scsicmd = cmd->cmnd;
if (scsicmd[0] == INQUIRY) {
unsigned int buflen;
buflen = ata_scsi_rbuf_get(cmd, &buf);
- buf[2] = 0x5;
- buf[3] = (buf[3] & 0xf0) | 2;
+
+ /* ATAPI devices typically report zero for their SCSI version,
+ * and sometimes deviate from the spec WRT response data
+ * format. If SCSI version is reported as zero like normal,
+ * then we make the following fixups: 1) Fake MMC-5 version,
+ * to indicate to the Linux scsi midlayer this is a modern
+ * device. 2) Ensure response data format / ATAPI information
+ * are always correct.
+ */
+ /* FIXME: do we ever override EVPD pages and the like, with
+ * this code?
+ */
+ if (buf[2] == 0) {
+ buf[2] = 0x5;
+ buf[3] = 0x32;
+ }
+
ata_scsi_rbuf_put(cmd, buf);
}
+
cmd->result = SAM_STAT_GOOD;
}
qc->scsidone(cmd);
-
return 0;
}
/**
* Zero on success, non-zero on failure.
*/
-static unsigned int atapi_xlat(struct ata_queued_cmd *qc, u8 *scsicmd)
+static unsigned int atapi_xlat(struct ata_queued_cmd *qc, const u8 *scsicmd)
{
struct scsi_cmnd *cmd = qc->scsicmd;
struct ata_device *dev = qc->dev;
*/
static struct ata_device *
-ata_scsi_find_dev(struct ata_port *ap, struct scsi_device *scsidev)
+ata_scsi_find_dev(struct ata_port *ap, const struct scsi_device *scsidev)
{
struct ata_device *dev;
if (unlikely(!ata_dev_present(dev)))
return NULL;
-#ifndef ATA_ENABLE_ATAPI
- if (unlikely(dev->class == ATA_DEV_ATAPI))
- return NULL;
-#endif
+ if (!atapi_enabled) {
+ if (unlikely(dev->class == ATA_DEV_ATAPI))
+ return NULL;
+ }
return dev;
}
void (*done)(struct scsi_cmnd *))
{
struct ata_scsi_args args;
- u8 *scsicmd = cmd->cmnd;
+ const u8 *scsicmd = cmd->cmnd;
args.id = id;
args.cmd = cmd;
case INQUIRY:
if (scsicmd[1] & 2) /* is CmdDt set? */
- ata_bad_cdb(cmd, done);
+ ata_scsi_invalid_field(cmd, done);
else if ((scsicmd[1] & 1) == 0) /* is EVPD clear? */
ata_scsi_rbuf_fill(&args, ata_scsiop_inq_std);
else if (scsicmd[2] == 0x00)
else if (scsicmd[2] == 0x83)
ata_scsi_rbuf_fill(&args, ata_scsiop_inq_83);
else
- ata_bad_cdb(cmd, done);
+ ata_scsi_invalid_field(cmd, done);
break;
case MODE_SENSE:
case MODE_SELECT: /* unconditionally return */
case MODE_SELECT_10: /* bad-field-in-cdb */
- ata_bad_cdb(cmd, done);
+ ata_scsi_invalid_field(cmd, done);
break;
case READ_CAPACITY:
if ((scsicmd[1] & 0x1f) == SAI_READ_CAPACITY_16)
ata_scsi_rbuf_fill(&args, ata_scsiop_read_cap);
else
- ata_bad_cdb(cmd, done);
+ ata_scsi_invalid_field(cmd, done);
break;
case REPORT_LUNS:
/* all other commands */
default:
- ata_bad_scsiop(cmd, done);
+ ata_scsi_set_sense(cmd, ILLEGAL_REQUEST, 0x20, 0x0);
+ /* "Invalid command operation code" */
+ done(cmd);
break;
}
}
+void ata_scsi_scan_host(struct ata_port *ap)
+{
+ struct ata_device *dev;
+ unsigned int i;
+
+ if (ap->flags & ATA_FLAG_PORT_DISABLED)
+ return;
+
+ for (i = 0; i < ATA_MAX_DEVICES; i++) {
+ dev = &ap->device[i];
+
+ if (ata_dev_present(dev))
+ scsi_scan_target(&ap->host->shost_gendev, 0, i, 0, 0);
+ }
+}
+