#include "libata.h"
static unsigned int ata_dev_init_params(struct ata_port *ap,
- struct ata_device *dev);
+ struct ata_device *dev,
+ u16 heads,
+ u16 sectors);
static void ata_set_mode(struct ata_port *ap);
static unsigned int ata_dev_set_xfermode(struct ata_port *ap,
struct ata_device *dev);
* ata_rwcmd_protocol - set taskfile r/w commands and protocol
* @qc: command to examine and configure
*
- * Examine the device configuration and tf->flags to calculate
+ * Examine the device configuration and tf->flags to calculate
* the proper read/write commands and protocol to use.
*
* LOCKING:
u8 cmd;
int index, fua, lba48, write;
-
+
fua = (tf->flags & ATA_TFLAG_FUA) ? 4 : 0;
lba48 = (tf->flags & ATA_TFLAG_LBA48) ? 2 : 0;
write = (tf->flags & ATA_TFLAG_WRITE) ? 1 : 0;
}
static const struct ata_xfer_ent {
- unsigned int shift, bits;
+ int shift, bits;
u8 base;
} ata_xfer_tbl[] = {
{ ATA_SHIFT_PIO, ATA_BITS_PIO, XFER_PIO_0 },
qc->private_data = &wait;
qc->complete_fn = ata_qc_complete_internal;
- qc->err_mask = ata_qc_issue(qc);
- if (qc->err_mask)
- ata_qc_complete(qc);
+ ata_qc_issue(qc);
spin_unlock_irqrestore(&ap->host_set->lock, flags);
return 0;
if (speed > 2)
return 1;
-
+
/* If we have no drive specific rule, then PIO 2 is non IORDY */
if (adev->id[ATA_ID_FIELD_VALID] & 2) { /* EIDE */
*
* Read ID data from the specified device. ATA_CMD_ID_ATA is
* performed on ATA devices and ATA_CMD_ID_ATAPI on ATAPI
- * devices. This function also takes care of EDD signature
- * misreporting (to be removed once EDD support is gone) and
- * issues ATA_CMD_INIT_DEV_PARAMS for pre-ATA4 drives.
+ * devices. This function also issues ATA_CMD_INIT_DEV_PARAMS
+ * for pre-ATA4 drives.
*
* LOCKING:
* Kernel thread context (may sleep)
unsigned int *p_class, int post_reset, u16 **p_id)
{
unsigned int class = *p_class;
- unsigned int using_edd;
struct ata_taskfile tf;
unsigned int err_mask = 0;
u16 *id;
DPRINTK("ENTER, host %u, dev %u\n", ap->id, dev->devno);
- if (ap->ops->probe_reset ||
- ap->flags & (ATA_FLAG_SRST | ATA_FLAG_SATA_RESET))
- using_edd = 0;
- else
- using_edd = 1;
-
ata_dev_select(ap, dev->devno, 1, 1); /* select device 0/1 */
id = kmalloc(sizeof(id[0]) * ATA_ID_WORDS, GFP_KERNEL);
err_mask = ata_exec_internal(ap, dev, &tf, DMA_FROM_DEVICE,
id, sizeof(id[0]) * ATA_ID_WORDS);
-
if (err_mask) {
rc = -EIO;
reason = "I/O error";
-
- if (err_mask & ~AC_ERR_DEV)
- goto err_out;
-
- /*
- * arg! EDD works for all test cases, but seems to return
- * the ATA signature for some ATAPI devices. Until the
- * reason for this is found and fixed, we fix up the mess
- * here. If IDENTIFY DEVICE returns command aborted
- * (as ATAPI devices do), then we issue an
- * IDENTIFY PACKET DEVICE.
- *
- * ATA software reset (SRST, the default) does not appear
- * to have this problem.
- */
- if ((using_edd) && (class == ATA_DEV_ATA)) {
- u8 err = tf.feature;
- if (err & ATA_ABORTED) {
- class = ATA_DEV_ATAPI;
- goto retry;
- }
- }
goto err_out;
}
swap_buf_le16(id, ATA_ID_WORDS);
/* sanity check */
- if ((class == ATA_DEV_ATA) != ata_id_is_ata(id)) {
+ if ((class == ATA_DEV_ATA) != (ata_id_is_ata(id) | ata_id_is_cfa(id))) {
rc = -EINVAL;
reason = "device reports illegal type";
goto err_out;
* Some drives were very specific about that exact sequence.
*/
if (ata_id_major_version(id) < 4 || !ata_id_has_lba(id)) {
- err_mask = ata_dev_init_params(ap, dev);
+ err_mask = ata_dev_init_params(ap, dev, id[3], id[6]);
if (err_mask) {
rc = -EIO;
reason = "INIT_DEV_PARAMS failed";
if (!found)
goto err_out_disable;
- ata_set_mode(ap);
+ if (ap->ops->set_mode)
+ ap->ops->set_mode(ap);
+ else
+ ata_set_mode(ap);
+
if (ap->flags & ATA_FLAG_PORT_DISABLED)
goto err_out_disable;
ata_bus_reset(ap);
}
+/**
+ * ata_dev_pair - return other device on cable
+ * @ap: port
+ * @adev: device
+ *
+ * Obtain the other device on the same cable, or if none is
+ * present NULL is returned
+ */
+
+struct ata_device *ata_dev_pair(struct ata_port *ap, struct ata_device *adev)
+{
+ struct ata_device *pair = &ap->device[1 - adev->devno];
+ if (!ata_dev_present(pair))
+ return NULL;
+ return pair;
+}
+
/**
* ata_port_disable - Disable port.
* @ap: Port to be disabled.
* PIO 0-5, MWDMA 0-2 and UDMA 0-6 timings (in nanoseconds).
* These were taken from ATA/ATAPI-6 standard, rev 0a, except
* for PIO 5, which is a nonstandard extension and UDMA6, which
- * is currently supported only by Maxtor drives.
+ * is currently supported only by Maxtor drives.
*/
static const struct ata_timing ata_timing[] = {
{ XFER_UDMA_0, 0, 0, 0, 0, 0, 0, 0, 120 },
/* { XFER_UDMA_SLOW, 0, 0, 0, 0, 0, 0, 0, 150 }, */
-
+
{ XFER_MW_DMA_2, 25, 0, 0, 0, 70, 25, 120, 0 },
{ XFER_MW_DMA_1, 45, 0, 0, 0, 80, 50, 150, 0 },
{ XFER_MW_DMA_0, 60, 0, 0, 0, 215, 215, 480, 0 },
-
+
{ XFER_SW_DMA_2, 60, 0, 0, 0, 120, 120, 240, 0 },
{ XFER_SW_DMA_1, 90, 0, 0, 0, 240, 240, 480, 0 },
{ XFER_SW_DMA_0, 120, 0, 0, 0, 480, 480, 960, 0 },
for (t = ata_timing; t->mode != speed; t++)
if (t->mode == 0xFF)
return NULL;
- return t;
+ return t;
}
int ata_timing_compute(struct ata_device *adev, unsigned short speed,
struct ata_timing p;
/*
- * Find the mode.
+ * Find the mode.
*/
if (!(s = ata_timing_find_mode(speed)))
*/
static void ata_set_mode(struct ata_port *ap)
{
- int i, rc;
+ int i, rc, used_dma = 0;
/* step 1: calculate xfer_mask */
for (i = 0; i < ATA_MAX_DEVICES; i++) {
dma_mask = ata_pack_xfermask(0, dev->mwdma_mask, dev->udma_mask);
dev->pio_mode = ata_xfer_mask2mode(pio_mask);
dev->dma_mode = ata_xfer_mask2mode(dma_mask);
+
+ if (dev->dma_mode)
+ used_dma = 1;
}
/* step 2: always set host PIO timings */
goto err_out;
}
+ /*
+ * Record simplex status. If we selected DMA then the other
+ * host channels are not permitted to do so.
+ */
+
+ if (used_dma && (ap->host_set->flags & ATA_HOST_SIMPLEX))
+ ap->host_set->simplex_claimed = 1;
+
+ /*
+ * Chip specific finalisation
+ */
if (ap->ops->post_set_mode)
ap->ops->post_set_mode(ap);
ap->ops->dev_select(ap, 0);
}
-/**
- * ata_bus_edd - Issue EXECUTE DEVICE DIAGNOSTIC command.
- * @ap: Port to reset and probe
- *
- * Use the EXECUTE DEVICE DIAGNOSTIC command to reset and
- * probe the bus. Not often used these days.
- *
- * LOCKING:
- * PCI/etc. bus probe sem.
- * Obtains host_set lock.
- *
- */
-
-static unsigned int ata_bus_edd(struct ata_port *ap)
-{
- struct ata_taskfile tf;
- unsigned long flags;
-
- /* set up execute-device-diag (bus reset) taskfile */
- /* also, take interrupts to a known state (disabled) */
- DPRINTK("execute-device-diag\n");
- ata_tf_init(ap, &tf, 0);
- tf.ctl |= ATA_NIEN;
- tf.command = ATA_CMD_EDD;
- tf.protocol = ATA_PROT_NODATA;
-
- /* do bus reset */
- spin_lock_irqsave(&ap->host_set->lock, flags);
- ata_tf_to_host(ap, &tf);
- spin_unlock_irqrestore(&ap->host_set->lock, flags);
-
- /* spec says at least 2ms. but who knows with those
- * crazy ATAPI devices...
- */
- msleep(150);
-
- return ata_busy_sleep(ap, ATA_TMOUT_BOOT_QUICK, ATA_TMOUT_BOOT);
-}
-
static unsigned int ata_bus_softreset(struct ata_port *ap,
unsigned int devmask)
{
*/
msleep(150);
-
- /* Before we perform post reset processing we want to see if
- the bus shows 0xFF because the odd clown forgets the D7 pulldown
- resistor */
-
+ /* Before we perform post reset processing we want to see if
+ * the bus shows 0xFF because the odd clown forgets the D7
+ * pulldown resistor.
+ */
if (ata_check_status(ap) == 0xFF)
- return 1; /* Positive is failure for some reason */
+ return AC_ERR_OTHER;
ata_bus_post_reset(ap, devmask);
struct ata_ioports *ioaddr = &ap->ioaddr;
unsigned int slave_possible = ap->flags & ATA_FLAG_SLAVE_POSS;
u8 err;
- unsigned int dev0, dev1 = 0, rc = 0, devmask = 0;
+ unsigned int dev0, dev1 = 0, devmask = 0;
DPRINTK("ENTER, host %u, port %u\n", ap->id, ap->port_no);
/* issue bus reset */
if (ap->flags & ATA_FLAG_SRST)
- rc = ata_bus_softreset(ap, devmask);
- else if ((ap->flags & ATA_FLAG_SATA_RESET) == 0) {
- /* set up device control */
- if (ap->flags & ATA_FLAG_MMIO)
- writeb(ap->ctl, (void __iomem *) ioaddr->ctl_addr);
- else
- outb(ap->ctl, ioaddr->ctl_addr);
- rc = ata_bus_edd(ap);
- }
-
- if (rc)
- goto err_out;
+ if (ata_bus_softreset(ap, devmask))
+ goto err_out;
/*
* determine by signature whether we have ATA or ATAPI devices
* so makes reset sequence different from the original
* ->phy_reset implementation and Jeff nervous. :-P
*/
-extern void ata_std_probeinit(struct ata_port *ap)
+void ata_std_probeinit(struct ata_port *ap)
{
- if (ap->flags & ATA_FLAG_SATA && ap->ops->scr_read) {
+ if ((ap->flags & ATA_FLAG_SATA) && ap->ops->scr_read) {
sata_phy_resume(ap);
if (sata_dev_present(ap))
ata_busy_sleep(ap, ATA_TMOUT_BOOT_QUICK, ATA_TMOUT_BOOT);
"SanDisk SDP3B-64", NULL,
"SANYO CD-ROM CRD", NULL,
"HITACHI CDR-8", NULL,
- "HITACHI CDR-8335", NULL,
+ "HITACHI CDR-8335", NULL,
"HITACHI CDR-8435", NULL,
- "Toshiba CD-ROM XM-6202B", NULL,
- "TOSHIBA CD-ROM XM-1702BC", NULL,
- "CD-532E-A", NULL,
- "E-IDE CD-ROM CR-840", NULL,
- "CD-ROM Drive/F5A", NULL,
- "WPI CDD-820", NULL,
+ "Toshiba CD-ROM XM-6202B", NULL,
+ "TOSHIBA CD-ROM XM-1702BC", NULL,
+ "CD-532E-A", NULL,
+ "E-IDE CD-ROM CR-840", NULL,
+ "CD-ROM Drive/F5A", NULL,
+ "WPI CDD-820", NULL,
"SAMSUNG CD-ROM SC-148C", NULL,
- "SAMSUNG CD-ROM SC", NULL,
+ "SAMSUNG CD-ROM SC", NULL,
"SanDisk SDP3B-64", NULL,
"ATAPI CD-ROM DRIVE 40X MAXIMUM",NULL,
"_NEC DV5800A", NULL,
"SAMSUNG CD-ROM SN-124", "N001"
};
-
+
static int ata_strim(char *s, size_t len)
{
len = strnlen(s, len);
* known limits including host controller limits, device
* blacklist, etc...
*
+ * FIXME: The current implementation limits all transfer modes to
+ * the fastest of the lowested device on the port. This is not
+ * required on most controllers.
+ *
* LOCKING:
* None.
*/
static void ata_dev_xfermask(struct ata_port *ap, struct ata_device *dev)
{
+ struct ata_host_set *hs = ap->host_set;
unsigned long xfer_mask;
int i;
xfer_mask = ata_pack_xfermask(ap->pio_mask, ap->mwdma_mask,
ap->udma_mask);
- /* use port-wide xfermask for now */
+ /* FIXME: Use port-wide xfermask for now */
for (i = 0; i < ATA_MAX_DEVICES; i++) {
struct ata_device *d = &ap->device[i];
if (!ata_dev_present(d))
xfer_mask &= ata_id_xfermask(d->id);
if (ata_dma_blacklisted(d))
xfer_mask &= ~(ATA_MASK_MWDMA | ATA_MASK_UDMA);
+ /* Apply cable rule here. Don't apply it early because when
+ we handle hot plug the cable type can itself change */
+ if (ap->cbl == ATA_CBL_PATA40)
+ xfer_mask &= ~(0xF8 << ATA_SHIFT_UDMA);
}
if (ata_dma_blacklisted(dev))
printk(KERN_WARNING "ata%u: dev %u is on DMA blacklist, "
"disabling DMA\n", ap->id, dev->devno);
+ if (hs->flags & ATA_HOST_SIMPLEX) {
+ if (hs->simplex_claimed)
+ xfer_mask &= ~(ATA_MASK_MWDMA | ATA_MASK_UDMA);
+ }
+ if (ap->ops->mode_filter)
+ xfer_mask = ap->ops->mode_filter(ap, dev, xfer_mask);
+
ata_unpack_xfermask(xfer_mask, &dev->pio_mask, &dev->mwdma_mask,
&dev->udma_mask);
}
*/
static unsigned int ata_dev_init_params(struct ata_port *ap,
- struct ata_device *dev)
+ struct ata_device *dev,
+ u16 heads,
+ u16 sectors)
{
struct ata_taskfile tf;
unsigned int err_mask;
- u16 sectors = dev->id[6];
- u16 heads = dev->id[3];
/* Number of sectors per track 1-255. Number of heads 1-16 */
if (sectors < 1 || sectors > 255 || heads < 1 || heads > 16)
- return 0;
+ return AC_ERR_INVALID;
/* set up init dev params taskfile */
DPRINTK("init dev params \n");
if (qc->flags & ATA_QCFLAG_SG) {
if (qc->n_elem)
- dma_unmap_sg(ap->host_set->dev, sg, qc->n_elem, dir);
+ dma_unmap_sg(ap->dev, sg, qc->n_elem, dir);
/* restore last sg */
sg[qc->orig_n_elem - 1].length += qc->pad_len;
if (pad_buf) {
}
} else {
if (qc->n_elem)
- dma_unmap_single(ap->host_set->dev,
+ dma_unmap_single(ap->dev,
sg_dma_address(&sg[0]), sg_dma_len(&sg[0]),
dir);
/* restore sg */
goto skip_map;
}
- dma_address = dma_map_single(ap->host_set->dev, qc->buf_virt,
+ dma_address = dma_map_single(ap->dev, qc->buf_virt,
sg->length, dir);
if (dma_mapping_error(dma_address)) {
/* restore sg */
}
dir = qc->dma_dir;
- n_elem = dma_map_sg(ap->host_set->dev, sg, pre_n_elem, dir);
+ n_elem = dma_map_sg(ap->dev, sg, pre_n_elem, dir);
if (n_elem < 1) {
/* restore last sg */
lsg->length += qc->pad_len;
if (qc->tf.command != ATA_CMD_PACKET)
printk(KERN_WARNING "ata%u: PIO error\n", ap->id);
- /* make sure qc->err_mask is available to
+ /* make sure qc->err_mask is available to
* know what's wrong and recover
*/
WARN_ON(qc->err_mask == 0);
*
* LOCKING:
* spin_lock_irqsave(host_set lock)
- *
- * RETURNS:
- * Zero on success, AC_ERR_* mask on failure
*/
-
-unsigned int ata_qc_issue(struct ata_queued_cmd *qc)
+void ata_qc_issue(struct ata_queued_cmd *qc)
{
struct ata_port *ap = qc->ap;
+ qc->ap->active_tag = qc->tag;
+ qc->flags |= ATA_QCFLAG_ACTIVE;
+
if (ata_should_dma_map(qc)) {
if (qc->flags & ATA_QCFLAG_SG) {
if (ata_sg_setup(qc))
ap->ops->qc_prep(qc);
- qc->ap->active_tag = qc->tag;
- qc->flags |= ATA_QCFLAG_ACTIVE;
-
- return ap->ops->qc_issue(qc);
+ qc->err_mask |= ap->ops->qc_issue(qc);
+ if (unlikely(qc->err_mask))
+ goto err;
+ return;
sg_err:
qc->flags &= ~ATA_QCFLAG_DMAMAP;
- return AC_ERR_SYSTEM;
+ qc->err_mask |= AC_ERR_SYSTEM;
+err:
+ ata_qc_complete(qc);
}
-
/**
* ata_qc_issue_prot - issue taskfile to device in proto-dependent manner
* @qc: command to issue to device
* Flush the cache on the drive, if appropriate, then issue a
* standbynow command.
*/
-int ata_device_suspend(struct ata_port *ap, struct ata_device *dev)
+int ata_device_suspend(struct ata_port *ap, struct ata_device *dev, pm_message_t state)
{
if (!ata_dev_present(dev))
return 0;
if (dev->class == ATA_DEV_ATA)
ata_flush_cache(ap, dev);
- ata_standby_drive(ap, dev);
+ if (state.event != PM_EVENT_FREEZE)
+ ata_standby_drive(ap, dev);
ap->flags |= ATA_FLAG_SUSPENDED;
return 0;
}
int ata_port_start (struct ata_port *ap)
{
- struct device *dev = ap->host_set->dev;
+ struct device *dev = ap->dev;
int rc;
ap->prd = dma_alloc_coherent(dev, ATA_PRD_TBL_SZ, &ap->prd_dma, GFP_KERNEL);
void ata_port_stop (struct ata_port *ap)
{
- struct device *dev = ap->host_set->dev;
+ struct device *dev = ap->dev;
dma_free_coherent(dev, ATA_PRD_TBL_SZ, ap->prd, ap->prd_dma);
ata_pad_free(ap, dev);
ap->host = host;
ap->ctl = ATA_DEVCTL_OBS;
ap->host_set = host_set;
+ ap->dev = ent->dev;
ap->port_no = port_no;
ap->hard_port_no =
ent->legacy_mode ? ent->hard_port_no : port_no;
int rc;
DPRINTK("ENTER\n");
+
+ if (!ent->port_ops->probe_reset &&
+ !(ent->host_flags & (ATA_FLAG_SATA_RESET | ATA_FLAG_SRST))) {
+ printk(KERN_ERR "ata%u: no reset mechanism available\n",
+ port_no);
+ return NULL;
+ }
+
host = scsi_host_alloc(ent->sht, sizeof(struct ata_port));
if (!host)
return NULL;
host_set->mmio_base = ent->mmio_base;
host_set->private_data = ent->private_data;
host_set->ops = ent->port_ops;
+ host_set->flags = ent->host_set_flags;
/* register each port bound to this device */
for (i = 0; i < ent->n_ports; i++) {
* ata_host_set_remove - PCI layer callback for device removal
* @host_set: ATA host set that was removed
*
- * Unregister all objects associated with this host set. Free those
+ * Unregister all objects associated with this host set. Free those
* objects.
*
* LOCKING:
EXPORT_SYMBOL_GPL(ata_std_probe_reset);
EXPORT_SYMBOL_GPL(ata_drive_probe_reset);
EXPORT_SYMBOL_GPL(ata_dev_revalidate);
+EXPORT_SYMBOL_GPL(ata_dev_classify);
+EXPORT_SYMBOL_GPL(ata_dev_pair);
EXPORT_SYMBOL_GPL(ata_port_disable);
EXPORT_SYMBOL_GPL(ata_ratelimit);
EXPORT_SYMBOL_GPL(ata_busy_sleep);
EXPORT_SYMBOL_GPL(ata_port_queue_task);
EXPORT_SYMBOL_GPL(ata_scsi_ioctl);
EXPORT_SYMBOL_GPL(ata_scsi_queuecmd);
-EXPORT_SYMBOL_GPL(ata_scsi_error);
EXPORT_SYMBOL_GPL(ata_scsi_slave_config);
EXPORT_SYMBOL_GPL(ata_scsi_release);
EXPORT_SYMBOL_GPL(ata_host_intr);
-EXPORT_SYMBOL_GPL(ata_dev_classify);
EXPORT_SYMBOL_GPL(ata_id_string);
EXPORT_SYMBOL_GPL(ata_id_c_string);
EXPORT_SYMBOL_GPL(ata_scsi_simulate);