instance = cmd->device->host;
hostdata = (struct IN2000_hostdata *) instance->hostdata;
- DB(DB_QUEUE_COMMAND, printk("Q-%d-%02x-%ld(", cmd->device->id, cmd->cmnd[0], cmd->pid))
+ DB(DB_QUEUE_COMMAND, scmd_printk(KERN_DEBUG, cmd, "Q-%02x-%ld(", cmd->cmnd[0], cmd->pid))
/* Set up a few fields in the Scsi_Cmnd structure for our own use:
* - host_scribble is the pointer to the next cmd in the input queue
*/
if (cmd->use_sg) {
- cmd->SCp.buffer = (struct scatterlist *) cmd->buffer;
+ cmd->SCp.buffer = (struct scatterlist *) cmd->request_buffer;
cmd->SCp.buffers_residual = cmd->use_sg - 1;
cmd->SCp.ptr = (char *) page_address(cmd->SCp.buffer->page) + cmd->SCp.buffer->offset;
cmd->SCp.this_residual = cmd->SCp.buffer->length;
struct Scsi_Host *instance;
struct IN2000_hostdata *hostdata;
int x;
+ unsigned long flags;
instance = cmd->device->host;
hostdata = (struct IN2000_hostdata *) instance->hostdata;
printk(KERN_WARNING "scsi%d: Reset. ", instance->host_no);
- /* do scsi-reset here */
+ spin_lock_irqsave(instance->host_lock, flags);
+ /* do scsi-reset here */
reset_hardware(instance, RESET_CARD_AND_BUS);
for (x = 0; x < 8; x++) {
hostdata->busy[x] = 0;
hostdata->outgoing_len = 0;
cmd->result = DID_RESET << 16;
- return SUCCESS;
-}
-
-static int in2000_host_reset(Scsi_Cmnd * cmd)
-{
- return FAILED;
-}
-static int in2000_device_reset(Scsi_Cmnd * cmd)
-{
- return FAILED;
+ spin_unlock_irqrestore(instance->host_lock, flags);
+ return SUCCESS;
}
-
-static int in2000_abort(Scsi_Cmnd * cmd)
+static int __in2000_abort(Scsi_Cmnd * cmd)
{
struct Scsi_Host *instance;
struct IN2000_hostdata *hostdata;
return SUCCESS;
}
+static int in2000_abort(Scsi_Cmnd * cmd)
+{
+ int rc;
+
+ spin_lock_irq(cmd->device->host->host_lock);
+ rc = __in2000_abort(cmd);
+ spin_unlock_irq(cmd->device->host->host_lock);
+
+ return rc;
+}
#define MAX_IN2000_HOSTS 3
10
};
+static int probe_bios(u32 addr, u32 *s1, uchar *switches)
+{
+ void __iomem *p = ioremap(addr, 0x34);
+ if (!p)
+ return 0;
+ *s1 = readl(p + 0x10);
+ if (*s1 == 0x41564f4e || readl(p + 0x30) == 0x61776c41) {
+ /* Read the switch image that's mapped into EPROM space */
+ *switches = ~readb(p + 0x20);
+ iounmap(p);
+ return 1;
+ }
+ iounmap(p);
+ return 0;
+}
-static int __init in2000_detect(Scsi_Host_Template * tpnt)
+static int __init in2000_detect(struct scsi_host_template * tpnt)
{
struct Scsi_Host *instance;
struct IN2000_hostdata *hostdata;
detect_count = 0;
for (bios = 0; bios_tab[bios]; bios++) {
+ u32 s1 = 0;
if (check_setup_args("ioport", &val, buf)) {
base = val;
switches = ~inb(base + IO_SWITCHES) & 0xff;
* for the obvious ID strings. We look for the 2 most common ones and
* hope that they cover all the cases...
*/
- else if (isa_readl(bios_tab[bios] + 0x10) == 0x41564f4e || isa_readl(bios_tab[bios] + 0x30) == 0x61776c41) {
+ else if (probe_bios(bios_tab[bios], &s1, &switches)) {
printk("Found IN2000 BIOS at 0x%x ", (unsigned int) bios_tab[bios]);
-/* Read the switch image that's mapped into EPROM space */
-
- switches = ~((isa_readb(bios_tab[bios] + 0x20) & 0xff));
-
/* Find out where the IO space is */
x = switches & (SW_ADDR0 | SW_ADDR1);
/* Older BIOS's had a 'sync on/off' switch - use its setting */
- if (isa_readl(bios_tab[bios] + 0x10) == 0x41564f4e && (switches & SW_SYNC_DOS5))
+ if (s1 == 0x41564f4e && (switches & SW_SYNC_DOS5))
hostdata->sync_off = 0x00; /* sync defaults to on */
else
hostdata->sync_off = 0xff; /* sync defaults to off */
MODULE_LICENSE("GPL");
-static Scsi_Host_Template driver_template = {
+static struct scsi_host_template driver_template = {
.proc_name = "in2000",
.proc_info = in2000_proc_info,
.name = "Always IN2000",
.queuecommand = in2000_queuecommand,
.eh_abort_handler = in2000_abort,
.eh_bus_reset_handler = in2000_bus_reset,
- .eh_device_reset_handler = in2000_device_reset,
- .eh_host_reset_handler = in2000_host_reset,
.bios_param = in2000_biosparam,
.can_queue = IN2000_CAN_Q,
.this_id = IN2000_HOST_ID,