#define IDESCSI_DEBUG_LOG 0
+#if IDESCSI_DEBUG_LOG
+#define debug_log(fmt, args...) \
+ printk(KERN_INFO "ide-scsi: " fmt, ## args)
+#else
+#define debug_log(fmt, args...) do {} while (0)
+#endif
+
/*
* SCSI command transformation layer
*/
print_hex_dump(KERN_CONT, "", DUMP_PREFIX_NONE, 16, 1, data, len, 0);
}
+static int idescsi_end_request(ide_drive_t *, int, int);
+
+static void ide_scsi_callback(ide_drive_t *drive)
+{
+ idescsi_scsi_t *scsi = drive_to_idescsi(drive);
+ struct ide_atapi_pc *pc = scsi->pc;
+
+ if (pc->flags & PC_FLAG_TIMEDOUT)
+ debug_log("%s: got timed out packet %lu at %lu\n", __func__,
+ pc->scsi_cmd->serial_number, jiffies);
+ /* end this request now - scsi should retry it*/
+ else if (test_bit(IDESCSI_LOG_CMD, &scsi->log))
+ printk(KERN_INFO "Packet command completed, %d bytes"
+ " transferred\n", pc->xferred);
+
+ idescsi_end_request(drive, 1, 0);
+}
+
static int idescsi_check_condition(ide_drive_t *drive,
struct request *failed_cmd)
{
rq->cmd_type = REQ_TYPE_SENSE;
rq->cmd_flags |= REQ_PREEMPT;
pc->timeout = jiffies + WAIT_READY;
+ pc->callback = ide_scsi_callback;
/* NOTE! Save the failed packet command in "rq->buffer" */
rq->buffer = (void *) failed_cmd->special;
pc->scsi_cmd = ((struct ide_atapi_pc *) failed_cmd->special)->scsi_cmd;
return 0;
}
-static int idescsi_end_request(ide_drive_t *, int, int);
-
static ide_startstop_t
idescsi_atapi_error(ide_drive_t *drive, struct request *rq, u8 stat, u8 err)
{
static ide_startstop_t
idescsi_atapi_abort(ide_drive_t *drive, struct request *rq)
{
-#if IDESCSI_DEBUG_LOG
- printk(KERN_WARNING "idescsi_atapi_abort called for %lu\n",
+ debug_log("%s called for %lu\n", __func__,
((struct ide_atapi_pc *) rq->special)->scsi_cmd->serial_number);
-#endif
+
rq->errors |= ERROR_MAX;
idescsi_end_request(drive, 0, 0);
idescsi_scsi_t *scsi = drive_to_idescsi(drive);
struct ide_atapi_pc *pc = scsi->pc;
-#if IDESCSI_DEBUG_LOG
- printk(KERN_WARNING "idescsi_expiry called for %lu at %lu\n", pc->scsi_cmd->serial_number, jiffies);
-#endif
+ debug_log("%s called for %lu at %lu\n", __func__,
+ pc->scsi_cmd->serial_number, jiffies);
+
pc->flags |= PC_FLAG_TIMEDOUT;
return 0; /* we do not want the ide subsystem to retry */
u16 bcount;
u8 stat, ireason;
-#if IDESCSI_DEBUG_LOG
- printk (KERN_INFO "ide-scsi: Reached idescsi_pc_intr interrupt handler\n");
-#endif /* IDESCSI_DEBUG_LOG */
+ debug_log("Reached %s interrupt handler\n", __func__);
if (pc->flags & PC_FLAG_TIMEDOUT) {
-#if IDESCSI_DEBUG_LOG
- printk(KERN_WARNING "idescsi_pc_intr: got timed out packet %lu at %lu\n",
- pc->scsi_cmd->serial_number, jiffies);
-#endif
- /* end this request now - scsi should retry it*/
- idescsi_end_request (drive, 1, 0);
+ pc->callback(drive);
return ide_stopped;
}
if (pc->flags & PC_FLAG_DMA_IN_PROGRESS) {
pc->flags |= PC_FLAG_DMA_ERROR;
else
pc->xferred = pc->req_xfer;
-#if IDESCSI_DEBUG_LOG
- printk ("ide-scsi: %s: DMA complete\n", drive->name);
-#endif /* IDESCSI_DEBUG_LOG */
+ debug_log("%s: DMA finished\n", drive->name);
}
/* Clear the interrupt */
if ((stat & DRQ_STAT) == 0) {
/* No more interrupts */
- if (test_bit(IDESCSI_LOG_CMD, &scsi->log))
- printk(KERN_INFO "Packet command completed, %d bytes"
- " transferred\n", pc->xferred);
pc->flags &= ~PC_FLAG_DMA_IN_PROGRESS;
local_irq_enable_in_hardirq();
if ((stat & ERR_STAT) || (pc->flags & PC_FLAG_DMA_ERROR))
rq->errors++;
- idescsi_end_request (drive, 1, 0);
+ pc->callback(drive);
return ide_stopped;
}
if (pc->flags & PC_FLAG_DMA_IN_PROGRESS) {
ireason = hwif->INB(hwif->io_ports.nsect_addr);
if (ireason & CD) {
- printk(KERN_ERR "ide-scsi: CoD != 0 in idescsi_pc_intr\n");
+ printk(KERN_ERR "%s: CoD != 0 in %s\n", drive->name, __func__);
return ide_do_reset (drive);
}
if (((ireason & IO) == IO) == !!(pc->flags & PC_FLAG_WRITING)) {
temp = pc->xferred + bcount;
if (temp > pc->req_xfer) {
if (temp > pc->buf_size) {
- printk(KERN_ERR "ide-scsi: The scsi wants to "
- "send us more data than expected "
- "- discarding data\n");
+ printk(KERN_ERR "%s: The device wants to send "
+ "us more data than expected - "
+ "discarding data\n",
+ drive->name);
temp = pc->buf_size - pc->xferred;
if (temp) {
if (pc->sg)
else
hwif->input_data(drive, NULL,
pc->cur_pos, temp);
- printk(KERN_ERR "ide-scsi: transferred"
- " %d of %d bytes\n",
+ printk(KERN_ERR "%s: transferred %d of "
+ "%d bytes\n",
+ drive->name,
temp, bcount);
}
pc->xferred += temp;
ide_set_handler(drive, &idescsi_pc_intr, get_timeout(pc), idescsi_expiry);
return ide_started;
}
-#if IDESCSI_DEBUG_LOG
- printk (KERN_NOTICE "ide-scsi: The scsi wants to send us more data than expected - allowing transfer\n");
-#endif /* IDESCSI_DEBUG_LOG */
+ debug_log("The device wants to send us more data than "
+ "expected - allowing transfer\n");
}
xferfunc = hwif->input_data;
} else
static ide_startstop_t idescsi_transfer_pc(ide_drive_t *drive)
{
- ide_hwif_t *hwif = drive->hwif;
idescsi_scsi_t *scsi = drive_to_idescsi(drive);
- struct ide_atapi_pc *pc = scsi->pc;
- ide_startstop_t startstop;
- u8 ireason;
-
- if (ide_wait_stat(&startstop,drive,DRQ_STAT,BUSY_STAT,WAIT_READY)) {
- printk(KERN_ERR "ide-scsi: Strange, packet command "
- "initiated yet DRQ isn't asserted\n");
- return startstop;
- }
- ireason = hwif->INB(hwif->io_ports.nsect_addr);
- if ((ireason & CD) == 0 || (ireason & IO)) {
- printk(KERN_ERR "ide-scsi: (IO,CoD) != (0,1) while "
- "issuing a packet command\n");
- return ide_do_reset (drive);
- }
- /* Set the interrupt routine */
- ide_set_handler(drive, &idescsi_pc_intr, get_timeout(pc), idescsi_expiry);
-
- if (pc->flags & PC_FLAG_DMA_OK) {
- pc->flags |= PC_FLAG_DMA_IN_PROGRESS;
- hwif->dma_ops->dma_start(drive);
- }
-
- /* Send the actual packet */
- hwif->output_data(drive, NULL, scsi->pc->c, 12);
-
- return ide_started;
+ return ide_transfer_pc(drive, scsi->pc, idescsi_pc_intr,
+ get_timeout(scsi->pc), idescsi_expiry);
}
static inline int idescsi_set_direction(struct ide_atapi_pc *pc)
struct ide_atapi_pc *pc)
{
idescsi_scsi_t *scsi = drive_to_idescsi(drive);
- ide_hwif_t *hwif = drive->hwif;
- u16 bcount;
- u8 dma = 0;
/* Set the current packet command */
scsi->pc = pc;
- /* We haven't transferred any data yet */
- pc->xferred = 0;
- pc->cur_pos = pc->buf;
- /* Request to transfer the entire buffer at once */
- bcount = min(pc->req_xfer, 63 * 1024);
-
- if (drive->using_dma && !idescsi_map_sg(drive, pc)) {
- hwif->sg_mapped = 1;
- dma = !hwif->dma_ops->dma_setup(drive);
- hwif->sg_mapped = 0;
- }
-
- ide_pktcmd_tf_load(drive, 0, bcount, dma);
- if (dma)
- pc->flags |= PC_FLAG_DMA_OK;
-
- if (test_bit(IDESCSI_DRQ_INTERRUPT, &scsi->flags)) {
- ide_execute_command(drive, WIN_PACKETCMD, &idescsi_transfer_pc,
- get_timeout(pc), idescsi_expiry);
- return ide_started;
- } else {
- /* Issue the packet command */
- ide_execute_pkt_cmd(drive);
- return idescsi_transfer_pc(drive);
- }
+ return ide_issue_pc(drive, pc, idescsi_transfer_pc,
+ get_timeout(pc), idescsi_expiry);
}
/*
*/
static ide_startstop_t idescsi_do_request (ide_drive_t *drive, struct request *rq, sector_t block)
{
-#if IDESCSI_DEBUG_LOG
- printk (KERN_INFO "dev: %s, cmd: %x, errors: %d\n", rq->rq_disk->disk_name,rq->cmd[0],rq->errors);
- printk (KERN_INFO "sector: %ld, nr_sectors: %ld, current_nr_sectors: %d\n",rq->sector,rq->nr_sectors,rq->current_nr_sectors);
-#endif /* IDESCSI_DEBUG_LOG */
+ debug_log("dev: %s, cmd: %x, errors: %d\n", rq->rq_disk->disk_name,
+ rq->cmd[0], rq->errors);
+ debug_log("sector: %ld, nr_sectors: %ld, current_nr_sectors: %d\n",
+ rq->sector, rq->nr_sectors, rq->current_nr_sectors);
if (blk_sense_request(rq) || blk_special_request(rq)) {
- return idescsi_issue_pc(drive,
- (struct ide_atapi_pc *) rq->special);
+ struct ide_atapi_pc *pc = (struct ide_atapi_pc *)rq->special;
+ idescsi_scsi_t *scsi = drive_to_idescsi(drive);
+
+ if (test_bit(IDESCSI_DRQ_INTERRUPT, &scsi->flags))
+ pc->flags |= PC_FLAG_DRQ_INTERRUPT;
+
+ if (drive->using_dma && !idescsi_map_sg(drive, pc))
+ pc->flags |= PC_FLAG_DMA_OK;
+
+ return idescsi_issue_pc(drive, pc);
}
blk_dump_rq_flags(rq, "ide-scsi: unsup command");
idescsi_end_request (drive, 0, 0);
put_disk(g);
ide_scsi_put(scsi);
+
+ drive->scsi = 0;
}
static int ide_scsi_probe(ide_drive_t *);
pc->scsi_cmd = cmd;
pc->done = done;
pc->timeout = jiffies + cmd->timeout_per_command;
+ pc->callback = ide_scsi_callback;
if (test_bit(IDESCSI_LOG_CMD, &scsi->log)) {
printk ("ide-scsi: %s: que %lu, cmd = ", drive->name, cmd->serial_number);
!(host = scsi_host_alloc(&idescsi_template,sizeof(idescsi_scsi_t))))
return -ENODEV;
+ drive->scsi = 1;
+
g = alloc_disk(1 << PARTN_BITS);
if (!g)
goto out_host_put;
host->max_id = 1;
-#if IDESCSI_DEBUG_LOG
if (drive->id->last_lun)
- printk(KERN_NOTICE "%s: id->last_lun=%u\n", drive->name, drive->id->last_lun);
-#endif
+ debug_log("%s: id->last_lun=%u\n", drive->name,
+ drive->id->last_lun);
+
if ((drive->id->last_lun & 0x7) != 7)
host->max_lun = (drive->id->last_lun & 0x7) + 1;
else
put_disk(g);
out_host_put:
+ drive->scsi = 0;
scsi_host_put(host);
return err;
}
projects / linux-2.6 / blobdiff