#define IDESCSI_DEBUG_LOG 0
+#if IDESCSI_DEBUG_LOG
+#define debug_log(fmt, args...) \
+ printk(KERN_INFO "ide-scsi: " fmt, ## args)
+#else
+#define debug_log(fmt, args...) do {} while (0)
+#endif
+
/*
* SCSI command transformation layer
*/
#define IDESCSI_PC_RQ 90
/*
- * PIO data transfer routines using the scatter gather table.
+ * PIO data transfer routine using the scatter gather table.
*/
-static void idescsi_input_buffers(ide_drive_t *drive, struct ide_atapi_pc *pc,
- unsigned int bcount)
+static void ide_scsi_io_buffers(ide_drive_t *drive, struct ide_atapi_pc *pc,
+ unsigned int bcount, int write)
{
ide_hwif_t *hwif = drive->hwif;
- int count;
+ xfer_func_t *xf = write ? hwif->output_data : hwif->input_data;
char *buf;
+ int count;
while (bcount) {
count = min(pc->sg->length - pc->b_count, bcount);
local_irq_save(flags);
buf = kmap_atomic(sg_page(pc->sg), KM_IRQ0) +
- pc->sg->offset;
- hwif->input_data(drive, NULL, buf + pc->b_count, count);
+ pc->sg->offset;
+ xf(drive, NULL, buf + pc->b_count, count);
kunmap_atomic(buf - pc->sg->offset, KM_IRQ0);
local_irq_restore(flags);
} else {
buf = sg_virt(pc->sg);
- hwif->input_data(drive, NULL, buf + pc->b_count, count);
+ xf(drive, NULL, buf + pc->b_count, count);
}
bcount -= count; pc->b_count += count;
if (pc->b_count == pc->sg->length) {
}
if (bcount) {
- printk (KERN_ERR "ide-scsi: scatter gather table too small, discarding data\n");
- ide_pad_transfer(drive, 0, bcount);
+ printk(KERN_ERR "%s: scatter gather table too small, %s\n",
+ drive->name, write ? "padding with zeros"
+ : "discarding data");
+ ide_pad_transfer(drive, write, bcount);
}
}
-static void idescsi_output_buffers(ide_drive_t *drive, struct ide_atapi_pc *pc,
- unsigned int bcount)
+static void ide_scsi_hex_dump(u8 *data, int len)
{
- ide_hwif_t *hwif = drive->hwif;
- int count;
- char *buf;
+ print_hex_dump(KERN_CONT, "", DUMP_PREFIX_NONE, 16, 1, data, len, 0);
+}
- while (bcount) {
- count = min(pc->sg->length - pc->b_count, bcount);
- if (PageHighMem(sg_page(pc->sg))) {
- unsigned long flags;
+static int idescsi_end_request(ide_drive_t *, int, int);
- local_irq_save(flags);
- buf = kmap_atomic(sg_page(pc->sg), KM_IRQ0) +
- pc->sg->offset;
- hwif->output_data(drive, NULL, buf + pc->b_count, count);
- kunmap_atomic(buf - pc->sg->offset, KM_IRQ0);
- local_irq_restore(flags);
- } else {
- buf = sg_virt(pc->sg);
- hwif->output_data(drive, NULL, buf + pc->b_count, count);
- }
- bcount -= count; pc->b_count += count;
- if (pc->b_count == pc->sg->length) {
- if (!--pc->sg_cnt)
- break;
- pc->sg = sg_next(pc->sg);
- pc->b_count = 0;
- }
- }
+static void ide_scsi_callback(ide_drive_t *drive)
+{
+ idescsi_scsi_t *scsi = drive_to_idescsi(drive);
+ struct ide_atapi_pc *pc = scsi->pc;
- if (bcount) {
- printk (KERN_ERR "ide-scsi: scatter gather table too small, padding with zeros\n");
- ide_pad_transfer(drive, 1, bcount);
- }
-}
+ if (pc->flags & PC_FLAG_TIMEDOUT)
+ debug_log("%s: got timed out packet %lu at %lu\n", __func__,
+ pc->scsi_cmd->serial_number, jiffies);
+ /* end this request now - scsi should retry it*/
+ else if (test_bit(IDESCSI_LOG_CMD, &scsi->log))
+ printk(KERN_INFO "Packet command completed, %d bytes"
+ " transferred\n", pc->xferred);
-static void ide_scsi_hex_dump(u8 *data, int len)
-{
- print_hex_dump(KERN_CONT, "", DUMP_PREFIX_NONE, 16, 1, data, len, 0);
+ idescsi_end_request(drive, 1, 0);
}
static int idescsi_check_condition(ide_drive_t *drive,
rq->cmd_type = REQ_TYPE_SENSE;
rq->cmd_flags |= REQ_PREEMPT;
pc->timeout = jiffies + WAIT_READY;
+ pc->callback = ide_scsi_callback;
/* NOTE! Save the failed packet command in "rq->buffer" */
rq->buffer = (void *) failed_cmd->special;
pc->scsi_cmd = ((struct ide_atapi_pc *) failed_cmd->special)->scsi_cmd;
return 0;
}
-static int idescsi_end_request(ide_drive_t *, int, int);
-
static ide_startstop_t
idescsi_atapi_error(ide_drive_t *drive, struct request *rq, u8 stat, u8 err)
{
ide_hwif_t *hwif = drive->hwif;
- if (ide_read_status(drive) & (BUSY_STAT | DRQ_STAT))
+ if (hwif->read_status(hwif) & (BUSY_STAT | DRQ_STAT))
/* force an abort */
- hwif->OUTBSYNC(hwif, WIN_IDLEIMMEDIATE,
- hwif->io_ports.command_addr);
+ hwif->exec_command(hwif, WIN_IDLEIMMEDIATE);
rq->errors++;
return ide_stopped;
}
-static ide_startstop_t
-idescsi_atapi_abort(ide_drive_t *drive, struct request *rq)
-{
-#if IDESCSI_DEBUG_LOG
- printk(KERN_WARNING "idescsi_atapi_abort called for %lu\n",
- ((struct ide_atapi_pc *) rq->special)->scsi_cmd->serial_number);
-#endif
- rq->errors |= ERROR_MAX;
-
- idescsi_end_request(drive, 0, 0);
-
- return ide_stopped;
-}
-
static int idescsi_end_request (ide_drive_t *drive, int uptodate, int nrsecs)
{
idescsi_scsi_t *scsi = drive_to_idescsi(drive);
idescsi_scsi_t *scsi = drive_to_idescsi(drive);
struct ide_atapi_pc *pc = scsi->pc;
-#if IDESCSI_DEBUG_LOG
- printk(KERN_WARNING "idescsi_expiry called for %lu at %lu\n", pc->scsi_cmd->serial_number, jiffies);
-#endif
+ debug_log("%s called for %lu at %lu\n", __func__,
+ pc->scsi_cmd->serial_number, jiffies);
+
pc->flags |= PC_FLAG_TIMEDOUT;
return 0; /* we do not want the ide subsystem to retry */
static ide_startstop_t idescsi_pc_intr (ide_drive_t *drive)
{
idescsi_scsi_t *scsi = drive_to_idescsi(drive);
- ide_hwif_t *hwif = drive->hwif;
struct ide_atapi_pc *pc = scsi->pc;
- struct request *rq = pc->rq;
- unsigned int temp;
- u16 bcount;
- u8 stat, ireason;
-
-#if IDESCSI_DEBUG_LOG
- printk (KERN_INFO "ide-scsi: Reached idescsi_pc_intr interrupt handler\n");
-#endif /* IDESCSI_DEBUG_LOG */
- if (pc->flags & PC_FLAG_TIMEDOUT) {
-#if IDESCSI_DEBUG_LOG
- printk(KERN_WARNING "idescsi_pc_intr: got timed out packet %lu at %lu\n",
- pc->scsi_cmd->serial_number, jiffies);
-#endif
- /* end this request now - scsi should retry it*/
- idescsi_end_request (drive, 1, 0);
- return ide_stopped;
- }
- if (pc->flags & PC_FLAG_DMA_IN_PROGRESS) {
- pc->flags &= ~PC_FLAG_DMA_IN_PROGRESS;
-#if IDESCSI_DEBUG_LOG
- printk ("ide-scsi: %s: DMA complete\n", drive->name);
-#endif /* IDESCSI_DEBUG_LOG */
- pc->xferred = pc->req_xfer;
- (void)hwif->dma_ops->dma_end(drive);
- }
-
- /* Clear the interrupt */
- stat = ide_read_status(drive);
-
- if ((stat & DRQ_STAT) == 0) {
- /* No more interrupts */
- if (test_bit(IDESCSI_LOG_CMD, &scsi->log))
- printk(KERN_INFO "Packet command completed, %d bytes"
- " transferred\n", pc->xferred);
- local_irq_enable_in_hardirq();
- if (stat & ERR_STAT)
- rq->errors++;
- idescsi_end_request (drive, 1, 0);
- return ide_stopped;
- }
- bcount = (hwif->INB(hwif->io_ports.lbah_addr) << 8) |
- hwif->INB(hwif->io_ports.lbam_addr);
- ireason = hwif->INB(hwif->io_ports.nsect_addr);
-
- if (ireason & CD) {
- printk(KERN_ERR "ide-scsi: CoD != 0 in idescsi_pc_intr\n");
- return ide_do_reset (drive);
- }
- if (ireason & IO) {
- temp = pc->xferred + bcount;
- if (temp > pc->req_xfer) {
- if (temp > pc->buf_size) {
- printk(KERN_ERR "ide-scsi: The scsi wants to "
- "send us more data than expected "
- "- discarding data\n");
- temp = pc->buf_size - pc->xferred;
- if (temp) {
- pc->flags &= ~PC_FLAG_WRITING;
- if (pc->sg)
- idescsi_input_buffers(drive, pc,
- temp);
- else
- hwif->input_data(drive, NULL,
- pc->cur_pos, temp);
- printk(KERN_ERR "ide-scsi: transferred"
- " %d of %d bytes\n",
- temp, bcount);
- }
- pc->xferred += temp;
- pc->cur_pos += temp;
- ide_pad_transfer(drive, 0, bcount - temp);
- ide_set_handler(drive, &idescsi_pc_intr, get_timeout(pc), idescsi_expiry);
- return ide_started;
- }
-#if IDESCSI_DEBUG_LOG
- printk (KERN_NOTICE "ide-scsi: The scsi wants to send us more data than expected - allowing transfer\n");
-#endif /* IDESCSI_DEBUG_LOG */
- }
- }
- if (ireason & IO) {
- pc->flags &= ~PC_FLAG_WRITING;
- if (pc->sg)
- idescsi_input_buffers(drive, pc, bcount);
- else
- hwif->input_data(drive, NULL, pc->cur_pos, bcount);
- } else {
- pc->flags |= PC_FLAG_WRITING;
- if (pc->sg)
- idescsi_output_buffers(drive, pc, bcount);
- else
- hwif->output_data(drive, NULL, pc->cur_pos, bcount);
- }
- /* Update the current position */
- pc->xferred += bcount;
- pc->cur_pos += bcount;
-
- /* And set the interrupt handler again */
- ide_set_handler(drive, &idescsi_pc_intr, get_timeout(pc), idescsi_expiry);
- return ide_started;
+ return ide_pc_intr(drive, pc, idescsi_pc_intr, get_timeout(pc),
+ idescsi_expiry, NULL, NULL, NULL,
+ ide_scsi_io_buffers);
}
static ide_startstop_t idescsi_transfer_pc(ide_drive_t *drive)
{
- ide_hwif_t *hwif = drive->hwif;
idescsi_scsi_t *scsi = drive_to_idescsi(drive);
- struct ide_atapi_pc *pc = scsi->pc;
- ide_startstop_t startstop;
- u8 ireason;
-
- if (ide_wait_stat(&startstop,drive,DRQ_STAT,BUSY_STAT,WAIT_READY)) {
- printk(KERN_ERR "ide-scsi: Strange, packet command "
- "initiated yet DRQ isn't asserted\n");
- return startstop;
- }
- ireason = hwif->INB(hwif->io_ports.nsect_addr);
- if ((ireason & CD) == 0 || (ireason & IO)) {
- printk(KERN_ERR "ide-scsi: (IO,CoD) != (0,1) while "
- "issuing a packet command\n");
- return ide_do_reset (drive);
- }
- BUG_ON(HWGROUP(drive)->handler != NULL);
- /* Set the interrupt routine */
- ide_set_handler(drive, &idescsi_pc_intr, get_timeout(pc), idescsi_expiry);
- /* Send the actual packet */
- hwif->output_data(drive, NULL, scsi->pc->c, 12);
-
- if (pc->flags & PC_FLAG_DMA_OK) {
- pc->flags |= PC_FLAG_DMA_IN_PROGRESS;
- hwif->dma_ops->dma_start(drive);
- }
- return ide_started;
+ return ide_transfer_pc(drive, scsi->pc, idescsi_pc_intr,
+ get_timeout(scsi->pc), idescsi_expiry);
}
static inline int idescsi_set_direction(struct ide_atapi_pc *pc)
struct ide_atapi_pc *pc)
{
idescsi_scsi_t *scsi = drive_to_idescsi(drive);
- ide_hwif_t *hwif = drive->hwif;
- u16 bcount;
- u8 dma = 0;
/* Set the current packet command */
scsi->pc = pc;
- /* We haven't transferred any data yet */
- pc->xferred = 0;
- pc->cur_pos = pc->buf;
- /* Request to transfer the entire buffer at once */
- bcount = min(pc->req_xfer, 63 * 1024);
-
- if (drive->using_dma && !idescsi_map_sg(drive, pc)) {
- hwif->sg_mapped = 1;
- dma = !hwif->dma_ops->dma_setup(drive);
- hwif->sg_mapped = 0;
- }
-
- ide_pktcmd_tf_load(drive, 0, bcount, dma);
-
- if (dma)
- pc->flags |= PC_FLAG_DMA_OK;
- if (test_bit(IDESCSI_DRQ_INTERRUPT, &scsi->flags)) {
- ide_execute_command(drive, WIN_PACKETCMD, &idescsi_transfer_pc,
- get_timeout(pc), idescsi_expiry);
- return ide_started;
- } else {
- /* Issue the packet command */
- ide_execute_pkt_cmd(drive);
- return idescsi_transfer_pc(drive);
- }
+ return ide_issue_pc(drive, pc, idescsi_transfer_pc,
+ get_timeout(pc), idescsi_expiry);
}
/*
*/
static ide_startstop_t idescsi_do_request (ide_drive_t *drive, struct request *rq, sector_t block)
{
-#if IDESCSI_DEBUG_LOG
- printk (KERN_INFO "dev: %s, cmd: %x, errors: %d\n", rq->rq_disk->disk_name,rq->cmd[0],rq->errors);
- printk (KERN_INFO "sector: %ld, nr_sectors: %ld, current_nr_sectors: %d\n",rq->sector,rq->nr_sectors,rq->current_nr_sectors);
-#endif /* IDESCSI_DEBUG_LOG */
+ debug_log("dev: %s, cmd: %x, errors: %d\n", rq->rq_disk->disk_name,
+ rq->cmd[0], rq->errors);
+ debug_log("sector: %ld, nr_sectors: %ld, current_nr_sectors: %d\n",
+ rq->sector, rq->nr_sectors, rq->current_nr_sectors);
if (blk_sense_request(rq) || blk_special_request(rq)) {
- return idescsi_issue_pc(drive,
- (struct ide_atapi_pc *) rq->special);
+ struct ide_atapi_pc *pc = (struct ide_atapi_pc *)rq->special;
+ idescsi_scsi_t *scsi = drive_to_idescsi(drive);
+
+ if (test_bit(IDESCSI_DRQ_INTERRUPT, &scsi->flags))
+ pc->flags |= PC_FLAG_DRQ_INTERRUPT;
+
+ if (drive->using_dma && !idescsi_map_sg(drive, pc))
+ pc->flags |= PC_FLAG_DMA_OK;
+
+ return idescsi_issue_pc(drive, pc);
}
blk_dump_rq_flags(rq, "ide-scsi: unsup command");
idescsi_end_request (drive, 0, 0);
put_disk(g);
ide_scsi_put(scsi);
+
+ drive->scsi = 0;
}
static int ide_scsi_probe(ide_drive_t *);
.do_request = idescsi_do_request,
.end_request = idescsi_end_request,
.error = idescsi_atapi_error,
- .abort = idescsi_atapi_abort,
#ifdef CONFIG_IDE_PROC_FS
.proc = idescsi_proc,
#endif
memset (pc->c, 0, 12);
pc->flags = 0;
+ if (cmd->sc_data_direction == DMA_TO_DEVICE)
+ pc->flags |= PC_FLAG_WRITING;
pc->rq = rq;
memcpy (pc->c, cmd->cmnd, cmd->cmd_len);
pc->buf = NULL;
pc->scsi_cmd = cmd;
pc->done = done;
pc->timeout = jiffies + cmd->timeout_per_command;
+ pc->callback = ide_scsi_callback;
if (test_bit(IDESCSI_LOG_CMD, &scsi->log)) {
printk ("ide-scsi: %s: que %lu, cmd = ", drive->name, cmd->serial_number);
!(host = scsi_host_alloc(&idescsi_template,sizeof(idescsi_scsi_t))))
return -ENODEV;
+ drive->scsi = 1;
+
g = alloc_disk(1 << PARTN_BITS);
if (!g)
goto out_host_put;
host->max_id = 1;
-#if IDESCSI_DEBUG_LOG
if (drive->id->last_lun)
- printk(KERN_NOTICE "%s: id->last_lun=%u\n", drive->name, drive->id->last_lun);
-#endif
+ debug_log("%s: id->last_lun=%u\n", drive->name,
+ drive->id->last_lun);
+
if ((drive->id->last_lun & 0x7) != 7)
host->max_lun = (drive->id->last_lun & 0x7) + 1;
else
put_disk(g);
out_host_put:
+ drive->scsi = 0;
scsi_host_put(host);
return err;
}