#include <linux/timer.h>
#include <linux/string.h>
#include <linux/ioport.h>
+#include <linux/mutex.h>
#include <asm/processor.h> /* for boot_cpu_data */
#include <asm/pgtable.h>
*============================================================================
*/
-static DECLARE_MUTEX(adpt_configuration_lock);
+static DEFINE_MUTEX(adpt_configuration_lock);
static struct i2o_sys_tbl *sys_tbl = NULL;
static int sys_tbl_ind = 0;
*/
// Find HBA (host bus adapter) we are looking for
- down(&adpt_configuration_lock);
+ mutex_lock(&adpt_configuration_lock);
for (pHba = hba_chain; pHba; pHba = pHba->next) {
if (pHba->host == host) {
break; /* found adapter */
}
}
- up(&adpt_configuration_lock);
+ mutex_unlock(&adpt_configuration_lock);
if (pHba == NULL) {
return 0;
}
msg[2] = 0;
msg[3]= 0;
msg[4] = (u32)cmd;
- if( (rcode = adpt_i2o_post_wait(pHba, msg, sizeof(msg), FOREVER)) != 0){
+ if (pHba->host)
+ spin_lock_irq(pHba->host->host_lock);
+ rcode = adpt_i2o_post_wait(pHba, msg, sizeof(msg), FOREVER);
+ if (pHba->host)
+ spin_unlock_irq(pHba->host->host_lock);
+ if (rcode != 0) {
if(rcode == -EOPNOTSUPP ){
printk(KERN_INFO"%s: Abort cmd not supported\n",pHba->name);
return FAILED;
msg[2] = 0;
msg[3] = 0;
+ if (pHba->host)
+ spin_lock_irq(pHba->host->host_lock);
old_state = d->state;
d->state |= DPTI_DEV_RESET;
- if( (rcode = adpt_i2o_post_wait(pHba, msg,sizeof(msg), FOREVER)) ){
- d->state = old_state;
+ rcode = adpt_i2o_post_wait(pHba, msg,sizeof(msg), FOREVER);
+ d->state = old_state;
+ if (pHba->host)
+ spin_unlock_irq(pHba->host->host_lock);
+ if (rcode != 0) {
if(rcode == -EOPNOTSUPP ){
printk(KERN_INFO"%s: Device reset not supported\n",pHba->name);
return FAILED;
printk(KERN_INFO"%s: Device reset failed\n",pHba->name);
return FAILED;
} else {
- d->state = old_state;
printk(KERN_INFO"%s: Device reset successful\n",pHba->name);
return SUCCESS;
}
{
adpt_hba* pHba;
u32 msg[4];
+ u32 rcode;
pHba = (adpt_hba*)cmd->device->host->hostdata[0];
memset(msg, 0, sizeof(msg));
msg[1] = (I2O_HBA_BUS_RESET<<24|HOST_TID<<12|pHba->channel[cmd->device->channel].tid);
msg[2] = 0;
msg[3] = 0;
- if(adpt_i2o_post_wait(pHba, msg,sizeof(msg), FOREVER) ){
+ if (pHba->host)
+ spin_lock_irq(pHba->host->host_lock);
+ rcode = adpt_i2o_post_wait(pHba, msg,sizeof(msg), FOREVER);
+ if (pHba->host)
+ spin_unlock_irq(pHba->host->host_lock);
+ if (rcode != 0) {
printk(KERN_WARNING"%s: Bus reset failed.\n",pHba->name);
return FAILED;
} else {
static void adpt_i2o_sys_shutdown(void)
{
adpt_hba *pHba, *pNext;
- struct adpt_i2o_post_wait_data *p1, *p2;
+ struct adpt_i2o_post_wait_data *p1, *old;
printk(KERN_INFO"Shutting down Adaptec I2O controllers.\n");
printk(KERN_INFO" This could take a few minutes if there are many devices attached\n");
}
/* Remove any timedout entries from the wait queue. */
- p2 = NULL;
// spin_lock_irqsave(&adpt_post_wait_lock, flags);
/* Nothing should be outstanding at this point so just
* free them
*/
- for(p1 = adpt_post_wait_queue; p1; p2 = p1, p1 = p2->next) {
- kfree(p1);
+ for(p1 = adpt_post_wait_queue; p1;) {
+ old = p1;
+ p1 = p1->next;
+ kfree(old);
}
// spin_unlock_irqrestore(&adpt_post_wait_lock, flags);
adpt_post_wait_queue = NULL;
}
memset(pHba, 0, sizeof(adpt_hba));
- down(&adpt_configuration_lock);
+ mutex_lock(&adpt_configuration_lock);
if(hba_chain != NULL){
for(p = hba_chain; p->next; p = p->next);
sprintf(pHba->name, "dpti%d", hba_count);
hba_count++;
- up(&adpt_configuration_lock);
+ mutex_unlock(&adpt_configuration_lock);
pHba->pDev = pDev;
pHba->base_addr_phys = base_addr0_phys;
struct adpt_device* pNext;
- down(&adpt_configuration_lock);
+ mutex_lock(&adpt_configuration_lock);
// scsi_unregister calls our adpt_release which
// does a quiese
if(pHba->host){
}
hba_count--;
- up(&adpt_configuration_lock);
+ mutex_unlock(&adpt_configuration_lock);
iounmap(pHba->base_addr_virt);
pci_release_regions(pHba->pDev);
static int adpt_i2o_install_device(adpt_hba* pHba, struct i2o_device *d)
{
- down(&adpt_configuration_lock);
+ mutex_lock(&adpt_configuration_lock);
d->controller=pHba;
d->owner=NULL;
d->next=pHba->devices;
pHba->devices=d;
*d->dev_name = 0;
- up(&adpt_configuration_lock);
+ mutex_unlock(&adpt_configuration_lock);
return 0;
}
if (minor >= hba_count) {
return -ENXIO;
}
- down(&adpt_configuration_lock);
+ mutex_lock(&adpt_configuration_lock);
for (pHba = hba_chain; pHba; pHba = pHba->next) {
if (pHba->unit == minor) {
break; /* found adapter */
}
}
if (pHba == NULL) {
- up(&adpt_configuration_lock);
+ mutex_unlock(&adpt_configuration_lock);
return -ENXIO;
}
// if(pHba->in_use){
- // up(&adpt_configuration_lock);
+ // mutex_unlock(&adpt_configuration_lock);
// return -EBUSY;
// }
pHba->in_use = 1;
- up(&adpt_configuration_lock);
+ mutex_unlock(&adpt_configuration_lock);
return 0;
}
if (minor >= hba_count) {
return -ENXIO;
}
- down(&adpt_configuration_lock);
+ mutex_lock(&adpt_configuration_lock);
for (pHba = hba_chain; pHba; pHba = pHba->next) {
if (pHba->unit == minor) {
break; /* found adapter */
}
}
- up(&adpt_configuration_lock);
+ mutex_unlock(&adpt_configuration_lock);
if (pHba == NULL) {
return -ENXIO;
}
if (minor >= DPTI_MAX_HBA){
return -ENXIO;
}
- down(&adpt_configuration_lock);
+ mutex_lock(&adpt_configuration_lock);
for (pHba = hba_chain; pHba; pHba = pHba->next) {
if (pHba->unit == minor) {
break; /* found adapter */
}
}
- up(&adpt_configuration_lock);
+ mutex_unlock(&adpt_configuration_lock);
if(pHba == NULL){
return -ENXIO;
}