#include <linux/spinlock.h>
#include <linux/pci.h>
#include <linux/blkdev.h>
+#include <linux/dma-mapping.h>
#include <asm/system.h>
#include <asm/io.h>
}
workreq = dev->id[c][target_id].curr_req;
#ifdef ED_DBGP
- printk(KERN_DEBUG "Channel = %d ID = %d LUN = %d CDB",c,workreq->device->id,workreq->device->lun);
- for(l=0;l<workreq->cmd_len;l++)
- {
+ scmd_printk(KERN_DEBUG, workreq, "CDB");
+ for (l = 0; l < workreq->cmd_len; l++)
printk(KERN_DEBUG " %x",workreq->cmnd[l]);
- }
+ printk("\n");
#endif
tmport = workport + 0x0f;
struct atp_unit *dev;
struct Scsi_Host *host;
- c = req_p->device->channel;
+ c = scmd_channel(req_p);
req_p->sense_buffer[0]=0;
req_p->resid = 0;
- if (req_p->device->channel > 1) {
+ if (scmd_channel(req_p) > 1) {
req_p->result = 0x00040000;
done(req_p);
#ifdef ED_DBGP
m = 1;
- m = m << req_p->device->id;
+ m = m << scmd_id(req_p);
/*
* Fake a timeout for missing targets
dev->quhd[c] = 0;
}
workreq = dev->quereq[c][dev->quhd[c]];
- if (dev->id[c][workreq->device->id].curr_req == 0) {
- dev->id[c][workreq->device->id].curr_req = workreq;
- dev->last_cmd[c] = workreq->device->id;
+ if (dev->id[c][scmd_id(workreq)].curr_req == 0) {
+ dev->id[c][scmd_id(workreq)].curr_req = workreq;
+ dev->last_cmd[c] = scmd_id(workreq);
goto cmd_subp;
}
dev->quhd[c] = j;
oktosend:
#ifdef ED_DBGP
printk("OK to Send\n");
- printk("CDB");
+ scmd_printk(KERN_DEBUG, workreq, "CDB");
for(i=0;i<workreq->cmd_len;i++) {
printk(" %x",workreq->cmnd[i]);
}
- printk("\nChannel = %d ID = %d LUN = %d\n",c,workreq->device->id,workreq->device->lun);
+ printk("\n");
#endif
if (dev->dev_id == ATP885_DEVID) {
j = inb(dev->baseport + 0x29) & 0xfe;
outb(j, dev->baseport + 0x29);
- dev->r1f[c][workreq->device->id] = 0;
+ dev->r1f[c][scmd_id(workreq)] = 0;
}
if (workreq->cmnd[0] == READ_CAPACITY) {
tmport = workport + 0x1b;
j = 0;
- target_id = workreq->device->id;
+ target_id = scmd_id(workreq);
/*
* Wide ?
if (pci_enable_device(pdev))
return -EIO;
- if (!pci_set_dma_mask(pdev, 0xFFFFFFFFUL)) {
+ if (!pci_set_dma_mask(pdev, DMA_32BIT_MASK)) {
printk(KERN_INFO "atp870u: use 32bit DMA mask.\n");
} else {
printk(KERN_ERR "atp870u: DMA mask required but not available.\n");
if (atp_dev.chip_ver == 4)
shpnt->max_id = 16;
else
- shpnt->max_id = 7;
+ shpnt->max_id = 8;
shpnt->this_id = host_id;
shpnt->unique_id = base_io;
shpnt->io_port = base_io;
host = SCpnt->device->host;
dev = (struct atp_unit *)&host->hostdata;
- c=SCpnt->device->channel;
+ c = scmd_channel(SCpnt);
printk(" atp870u: abort Channel = %x \n", c);
printk("working=%x last_cmd=%x ", dev->working[c], dev->last_cmd[c]);
printk(" quhdu=%x quendu=%x ", dev->quhd[c], dev->quend[c]);