ICH5_PCS = 0x92, /* port control and status */
PIIX_SCC = 0x0A, /* sub-class code register */
+ PIIX_FLAG_IGNORE_PCS = (1 << 25), /* ignore PCS present bits */
+ PIIX_FLAG_SCR = (1 << 26), /* SCR available */
PIIX_FLAG_AHCI = (1 << 27), /* AHCI possible */
PIIX_FLAG_CHECKINTR = (1 << 28), /* make sure PCI INTx enabled */
PIIX_FLAG_COMBINED = (1 << 29), /* combined mode possible */
/* combined mode. if set, PATA is channel 0.
* if clear, PATA is channel 1.
*/
- PIIX_COMB_PATA_P0 = (1 << 1),
- PIIX_COMB = (1 << 2), /* combined mode enabled? */
-
PIIX_PORT_ENABLED = (1 << 0),
PIIX_PORT_PRESENT = (1 << 4),
PIIX_80C_PRI = (1 << 5) | (1 << 4),
PIIX_80C_SEC = (1 << 7) | (1 << 6),
- ich5_pata = 0,
- ich5_sata = 1,
- piix4_pata = 2,
- ich6_sata = 3,
- ich6_sata_ahci = 4,
+ /* controller IDs */
+ piix4_pata = 0,
+ ich5_pata = 1,
+ ich5_sata = 2,
+ esb_sata = 3,
+ ich6_sata = 4,
+ ich6_sata_ahci = 5,
+ ich6m_sata_ahci = 6,
+
+ /* constants for mapping table */
+ P0 = 0, /* port 0 */
+ P1 = 1, /* port 1 */
+ P2 = 2, /* port 2 */
+ P3 = 3, /* port 3 */
+ IDE = -1, /* IDE */
+ NA = -2, /* not avaliable */
+ RV = -3, /* reserved */
PIIX_AHCI_DEVICE = 6,
};
+struct piix_map_db {
+ const u32 mask;
+ const int map[][4];
+};
+
static int piix_init_one (struct pci_dev *pdev,
const struct pci_device_id *ent);
-static void piix_pata_phy_reset(struct ata_port *ap);
-static void piix_sata_phy_reset(struct ata_port *ap);
+static int piix_pata_probe_reset(struct ata_port *ap, unsigned int *classes);
+static int piix_sata_probe_reset(struct ata_port *ap, unsigned int *classes);
static void piix_set_piomode (struct ata_port *ap, struct ata_device *adev);
static void piix_set_dmamode (struct ata_port *ap, struct ata_device *adev);
* list in drivers/pci/quirks.c.
*/
+ /* 82801EB (ICH5) */
{ 0x8086, 0x24d1, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich5_sata },
+ /* 82801EB (ICH5) */
{ 0x8086, 0x24df, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich5_sata },
- { 0x8086, 0x25a3, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich5_sata },
- { 0x8086, 0x25b0, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich5_sata },
+ /* 6300ESB (ICH5 variant with broken PCS present bits) */
+ { 0x8086, 0x25a3, PCI_ANY_ID, PCI_ANY_ID, 0, 0, esb_sata },
+ /* 6300ESB pretending RAID */
+ { 0x8086, 0x25b0, PCI_ANY_ID, PCI_ANY_ID, 0, 0, esb_sata },
+ /* 82801FB/FW (ICH6/ICH6W) */
{ 0x8086, 0x2651, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6_sata },
+ /* 82801FR/FRW (ICH6R/ICH6RW) */
{ 0x8086, 0x2652, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6_sata_ahci },
- { 0x8086, 0x2653, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6_sata_ahci },
+ /* 82801FBM ICH6M (ICH6R with only port 0 and 2 implemented) */
+ { 0x8086, 0x2653, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6m_sata_ahci },
+ /* 82801GB/GR/GH (ICH7, identical to ICH6) */
{ 0x8086, 0x27c0, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6_sata_ahci },
- { 0x8086, 0x27c4, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6_sata_ahci },
+ /* 2801GBM/GHM (ICH7M, identical to ICH6M) */
+ { 0x8086, 0x27c4, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6m_sata_ahci },
+ /* Enterprise Southbridge 2 (where's the datasheet?) */
{ 0x8086, 0x2680, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6_sata_ahci },
+ /* SATA Controller 1 IDE (ICH8, no datasheet yet) */
{ 0x8086, 0x2820, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6_sata_ahci },
+ /* SATA Controller 2 IDE (ICH8, ditto) */
{ 0x8086, 0x2825, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6_sata_ahci },
- { 0x8086, 0x2828, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6_sata_ahci },
+ /* Mobile SATA Controller IDE (ICH8M, ditto) */
+ { 0x8086, 0x2828, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6m_sata_ahci },
{ } /* terminate list */
};
.can_queue = ATA_DEF_QUEUE,
.this_id = ATA_SHT_THIS_ID,
.sg_tablesize = LIBATA_MAX_PRD,
- .max_sectors = ATA_MAX_SECTORS,
.cmd_per_lun = ATA_SHT_CMD_PER_LUN,
.emulated = ATA_SHT_EMULATED,
.use_clustering = ATA_SHT_USE_CLUSTERING,
.exec_command = ata_exec_command,
.dev_select = ata_std_dev_select,
- .phy_reset = piix_pata_phy_reset,
+ .probe_reset = piix_pata_probe_reset,
.bmdma_setup = ata_bmdma_setup,
.bmdma_start = ata_bmdma_start,
.exec_command = ata_exec_command,
.dev_select = ata_std_dev_select,
- .phy_reset = piix_sata_phy_reset,
+ .probe_reset = piix_sata_probe_reset,
.bmdma_setup = ata_bmdma_setup,
.bmdma_start = ata_bmdma_start,
.host_stop = ata_host_stop,
};
+static struct piix_map_db ich5_map_db = {
+ .mask = 0x7,
+ .map = {
+ /* PM PS SM SS MAP */
+ { P0, NA, P1, NA }, /* 000b */
+ { P1, NA, P0, NA }, /* 001b */
+ { RV, RV, RV, RV },
+ { RV, RV, RV, RV },
+ { P0, P1, IDE, IDE }, /* 100b */
+ { P1, P0, IDE, IDE }, /* 101b */
+ { IDE, IDE, P0, P1 }, /* 110b */
+ { IDE, IDE, P1, P0 }, /* 111b */
+ },
+};
+
+static struct piix_map_db ich6_map_db = {
+ .mask = 0x3,
+ .map = {
+ /* PM PS SM SS MAP */
+ { P0, P2, P1, P3 }, /* 00b */
+ { IDE, IDE, P1, P3 }, /* 01b */
+ { P0, P2, IDE, IDE }, /* 10b */
+ { RV, RV, RV, RV },
+ },
+};
+
+static struct piix_map_db ich6m_map_db = {
+ .mask = 0x3,
+ .map = {
+ /* PM PS SM SS MAP */
+ { P0, P2, RV, RV }, /* 00b */
+ { RV, RV, RV, RV },
+ { P0, P2, IDE, IDE }, /* 10b */
+ { RV, RV, RV, RV },
+ },
+};
+
static struct ata_port_info piix_port_info[] = {
+ /* piix4_pata */
+ {
+ .sht = &piix_sht,
+ .host_flags = ATA_FLAG_SLAVE_POSS,
+ .pio_mask = 0x1f, /* pio0-4 */
+#if 0
+ .mwdma_mask = 0x06, /* mwdma1-2 */
+#else
+ .mwdma_mask = 0x00, /* mwdma broken */
+#endif
+ .udma_mask = ATA_UDMA_MASK_40C,
+ .port_ops = &piix_pata_ops,
+ },
+
/* ich5_pata */
{
.sht = &piix_sht,
- .host_flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST |
- PIIX_FLAG_CHECKINTR,
+ .host_flags = ATA_FLAG_SLAVE_POSS | PIIX_FLAG_CHECKINTR,
.pio_mask = 0x1f, /* pio0-4 */
#if 0
.mwdma_mask = 0x06, /* mwdma1-2 */
/* ich5_sata */
{
.sht = &piix_sht,
- .host_flags = ATA_FLAG_SATA | ATA_FLAG_SRST |
- PIIX_FLAG_COMBINED | PIIX_FLAG_CHECKINTR,
+ .host_flags = ATA_FLAG_SATA | PIIX_FLAG_COMBINED |
+ PIIX_FLAG_CHECKINTR,
.pio_mask = 0x1f, /* pio0-4 */
.mwdma_mask = 0x07, /* mwdma0-2 */
.udma_mask = 0x7f, /* udma0-6 */
.port_ops = &piix_sata_ops,
+ .private_data = &ich5_map_db,
},
- /* piix4_pata */
+ /* i6300esb_sata */
{
.sht = &piix_sht,
- .host_flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
+ .host_flags = ATA_FLAG_SATA | PIIX_FLAG_COMBINED |
+ PIIX_FLAG_CHECKINTR | PIIX_FLAG_IGNORE_PCS,
.pio_mask = 0x1f, /* pio0-4 */
-#if 0
- .mwdma_mask = 0x06, /* mwdma1-2 */
-#else
- .mwdma_mask = 0x00, /* mwdma broken */
-#endif
- .udma_mask = ATA_UDMA_MASK_40C,
- .port_ops = &piix_pata_ops,
+ .mwdma_mask = 0x07, /* mwdma0-2 */
+ .udma_mask = 0x7f, /* udma0-6 */
+ .port_ops = &piix_sata_ops,
+ .private_data = &ich5_map_db,
},
/* ich6_sata */
{
.sht = &piix_sht,
- .host_flags = ATA_FLAG_SATA | ATA_FLAG_SRST |
- PIIX_FLAG_COMBINED_ICH6 |
- PIIX_FLAG_CHECKINTR | ATA_FLAG_SLAVE_POSS,
+ .host_flags = ATA_FLAG_SATA | PIIX_FLAG_COMBINED_ICH6 |
+ PIIX_FLAG_CHECKINTR | PIIX_FLAG_SCR,
.pio_mask = 0x1f, /* pio0-4 */
.mwdma_mask = 0x07, /* mwdma0-2 */
.udma_mask = 0x7f, /* udma0-6 */
.port_ops = &piix_sata_ops,
+ .private_data = &ich6_map_db,
},
/* ich6_sata_ahci */
{
.sht = &piix_sht,
- .host_flags = ATA_FLAG_SATA | ATA_FLAG_SRST |
- PIIX_FLAG_COMBINED_ICH6 |
- PIIX_FLAG_CHECKINTR | ATA_FLAG_SLAVE_POSS |
+ .host_flags = ATA_FLAG_SATA | PIIX_FLAG_COMBINED_ICH6 |
+ PIIX_FLAG_CHECKINTR | PIIX_FLAG_SCR |
+ PIIX_FLAG_AHCI,
+ .pio_mask = 0x1f, /* pio0-4 */
+ .mwdma_mask = 0x07, /* mwdma0-2 */
+ .udma_mask = 0x7f, /* udma0-6 */
+ .port_ops = &piix_sata_ops,
+ .private_data = &ich6_map_db,
+ },
+
+ /* ich6m_sata_ahci */
+ {
+ .sht = &piix_sht,
+ .host_flags = ATA_FLAG_SATA | PIIX_FLAG_COMBINED_ICH6 |
+ PIIX_FLAG_CHECKINTR | PIIX_FLAG_SCR |
PIIX_FLAG_AHCI,
.pio_mask = 0x1f, /* pio0-4 */
.mwdma_mask = 0x07, /* mwdma0-2 */
.udma_mask = 0x7f, /* udma0-6 */
.port_ops = &piix_sata_ops,
+ .private_data = &ich6m_map_db,
},
};
}
/**
- * piix_pata_phy_reset - Probe specified port on PATA host controller
- * @ap: Port to probe
+ * piix_pata_probeinit - probeinit for PATA host controller
+ * @ap: Target port
*
- * Probe PATA phy.
+ * Probeinit including cable detection.
*
* LOCKING:
* None (inherited from caller).
*/
+static void piix_pata_probeinit(struct ata_port *ap)
+{
+ piix_pata_cbl_detect(ap);
+ ata_std_probeinit(ap);
+}
-static void piix_pata_phy_reset(struct ata_port *ap)
+/**
+ * piix_pata_probe_reset - Perform reset on PATA port and classify
+ * @ap: Port to reset
+ * @classes: Resulting classes of attached devices
+ *
+ * Reset PATA phy and classify attached devices.
+ *
+ * LOCKING:
+ * None (inherited from caller).
+ */
+static int piix_pata_probe_reset(struct ata_port *ap, unsigned int *classes)
{
struct pci_dev *pdev = to_pci_dev(ap->host_set->dev);
if (!pci_test_config_bits(pdev, &piix_enable_bits[ap->hard_port_no])) {
- ata_port_disable(ap);
printk(KERN_INFO "ata%u: port disabled. ignoring.\n", ap->id);
- return;
+ return 0;
}
- piix_pata_cbl_detect(ap);
-
- ata_port_probe(ap);
-
- ata_bus_reset(ap);
+ return ata_drive_probe_reset(ap, piix_pata_probeinit,
+ ata_std_softreset, NULL,
+ ata_std_postreset, classes);
}
/**
* piix_sata_probe - Probe PCI device for present SATA devices
* @ap: Port associated with the PCI device we wish to probe
*
- * Reads SATA PCI device's PCI config register Port Configuration
- * and Status (PCS) to determine port and device availability.
+ * Reads and configures SATA PCI device's PCI config register
+ * Port Configuration and Status (PCS) to determine port and
+ * device availability.
*
* LOCKING:
* None (inherited from caller).
*
* RETURNS:
- * Non-zero if port is enabled, it may or may not have a device
- * attached in that case (PRESENT bit would only be set if BIOS probe
- * was done). Zero is returned if port is disabled.
+ * Mask of avaliable devices on the port.
*/
-static int piix_sata_probe (struct ata_port *ap)
+static unsigned int piix_sata_probe (struct ata_port *ap)
{
struct pci_dev *pdev = to_pci_dev(ap->host_set->dev);
- int combined = (ap->flags & ATA_FLAG_SLAVE_POSS);
- int orig_mask, mask, i;
+ const unsigned int *map = ap->host_set->private_data;
+ int base = 2 * ap->hard_port_no;
+ unsigned int present_mask = 0;
+ int port, i;
u8 pcs;
- mask = (PIIX_PORT_PRESENT << ap->hard_port_no) |
- (PIIX_PORT_ENABLED << ap->hard_port_no);
-
pci_read_config_byte(pdev, ICH5_PCS, &pcs);
- orig_mask = (int) pcs & 0xff;
-
- /* TODO: this is vaguely wrong for ICH6 combined mode,
- * where only two of the four SATA ports are mapped
- * onto a single ATA channel. It is also vaguely inaccurate
- * for ICH5, which has only two ports. However, this is ok,
- * as further device presence detection code will handle
- * any false positives produced here.
- */
+ DPRINTK("ata%u: ENTER, pcs=0x%x base=%d\n", ap->id, pcs, base);
- for (i = 0; i < 4; i++) {
- mask = (PIIX_PORT_ENABLED << i);
+ /* enable all ports on this ap and wait for them to settle */
+ for (i = 0; i < 2; i++) {
+ port = map[base + i];
+ if (port >= 0)
+ pcs |= 1 << port;
+ }
+
+ pci_write_config_byte(pdev, ICH5_PCS, pcs);
+ msleep(100);
+
+ /* let's see which devices are present */
+ pci_read_config_byte(pdev, ICH5_PCS, &pcs);
- if ((orig_mask & mask) == mask)
- if (combined || (i == ap->hard_port_no))
- return 1;
+ for (i = 0; i < 2; i++) {
+ port = map[base + i];
+ if (port < 0)
+ continue;
+ if (ap->flags & PIIX_FLAG_IGNORE_PCS || pcs & 1 << (4 + port))
+ present_mask |= 1 << i;
+ else
+ pcs &= ~(1 << port);
}
- return 0;
+ /* disable offline ports on non-AHCI controllers */
+ if (!(ap->flags & PIIX_FLAG_AHCI))
+ pci_write_config_byte(pdev, ICH5_PCS, pcs);
+
+ DPRINTK("ata%u: LEAVE, pcs=0x%x present_mask=0x%x\n",
+ ap->id, pcs, present_mask);
+
+ return present_mask;
}
/**
- * piix_sata_phy_reset - Probe specified port on SATA host controller
- * @ap: Port to probe
+ * piix_sata_probe_reset - Perform reset on SATA port and classify
+ * @ap: Port to reset
+ * @classes: Resulting classes of attached devices
*
- * Probe SATA phy.
+ * Reset SATA phy and classify attached devices.
*
* LOCKING:
* None (inherited from caller).
*/
-
-static void piix_sata_phy_reset(struct ata_port *ap)
+static int piix_sata_probe_reset(struct ata_port *ap, unsigned int *classes)
{
if (!piix_sata_probe(ap)) {
- ata_port_disable(ap);
printk(KERN_INFO "ata%u: SATA port has no device.\n", ap->id);
- return;
+ return 0;
}
- ap->cbl = ATA_CBL_SATA;
-
- ata_port_probe(ap);
-
- ata_bus_reset(ap);
+ return ata_drive_probe_reset(ap, ata_std_probeinit,
+ ata_std_softreset, NULL,
+ ata_std_postreset, classes);
}
/**
/**
* piix_check_450nx_errata - Check for problem 450NX setup
* @ata_dev: the PCI device to check
- *
+ *
* Check for the present of 450NX errata #19 and errata #25. If
* they are found return an error code so we can turn off DMA
*/
u16 cfg;
u8 rev;
int no_piix_dma = 0;
-
+
while((pdev = pci_get_device(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82454NX, pdev)) != NULL)
{
/* Look for 450NX PXB. Check for problem configurations
if(no_piix_dma == 2)
dev_printk(KERN_WARNING, &ata_dev->dev, "A BIOS update may resolve this.\n");
return no_piix_dma;
-}
+}
+
+static void __devinit piix_init_sata_map(struct pci_dev *pdev,
+ struct ata_port_info *pinfo)
+{
+ struct piix_map_db *map_db = pinfo[0].private_data;
+ const unsigned int *map;
+ int i, invalid_map = 0;
+ u8 map_value;
+
+ pci_read_config_byte(pdev, ICH5_PMR, &map_value);
+
+ map = map_db->map[map_value & map_db->mask];
+
+ dev_printk(KERN_INFO, &pdev->dev, "MAP [");
+ for (i = 0; i < 4; i++) {
+ switch (map[i]) {
+ case RV:
+ invalid_map = 1;
+ printk(" XX");
+ break;
+
+ case NA:
+ printk(" --");
+ break;
+
+ case IDE:
+ WARN_ON((i & 1) || map[i + 1] != IDE);
+ pinfo[i / 2] = piix_port_info[ich5_pata];
+ i++;
+ printk(" IDE IDE");
+ break;
+
+ default:
+ printk(" P%d", map[i]);
+ if (i & 1)
+ pinfo[i / 2].host_flags |= ATA_FLAG_SLAVE_POSS;
+ break;
+ }
+ }
+ printk(" ]\n");
+
+ if (invalid_map)
+ dev_printk(KERN_ERR, &pdev->dev,
+ "invalid MAP value %u\n", map_value);
+
+ pinfo[0].private_data = (void *)map;
+ pinfo[1].private_data = (void *)map;
+}
/**
* piix_init_one - Register PIIX ATA PCI device with kernel services
static int piix_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
{
static int printed_version;
- struct ata_port_info *port_info[2];
- unsigned int combined = 0;
- unsigned int pata_chan = 0, sata_chan = 0;
+ struct ata_port_info port_info[2];
+ struct ata_port_info *ppinfo[2] = { &port_info[0], &port_info[1] };
unsigned long host_flags;
if (!printed_version++)
if (!in_module_init)
return -ENODEV;
- port_info[0] = &piix_port_info[ent->driver_data];
- port_info[1] = &piix_port_info[ent->driver_data];
+ port_info[0] = piix_port_info[ent->driver_data];
+ port_info[1] = piix_port_info[ent->driver_data];
- host_flags = port_info[0]->host_flags;
+ host_flags = port_info[0].host_flags;
if (host_flags & PIIX_FLAG_AHCI) {
u8 tmp;
}
}
- if (host_flags & PIIX_FLAG_COMBINED) {
- u8 tmp;
- pci_read_config_byte(pdev, ICH5_PMR, &tmp);
-
- if (host_flags & PIIX_FLAG_COMBINED_ICH6) {
- switch (tmp & 0x3) {
- case 0:
- break;
- case 1:
- combined = 1;
- sata_chan = 1;
- break;
- case 2:
- combined = 1;
- pata_chan = 1;
- break;
- case 3:
- dev_printk(KERN_WARNING, &pdev->dev,
- "invalid MAP value %u\n", tmp);
- break;
- }
- } else {
- if (tmp & PIIX_COMB) {
- combined = 1;
- if (tmp & PIIX_COMB_PATA_P0)
- sata_chan = 1;
- else
- pata_chan = 1;
- }
- }
- }
+ /* Initialize SATA map */
+ if (host_flags & ATA_FLAG_SATA)
+ piix_init_sata_map(pdev, port_info);
/* On ICH5, some BIOSen disable the interrupt using the
* PCI_COMMAND_INTX_DISABLE bit added in PCI 2.3.
if (host_flags & PIIX_FLAG_CHECKINTR)
pci_intx(pdev, 1);
- if (combined) {
- port_info[sata_chan] = &piix_port_info[ent->driver_data];
- port_info[sata_chan]->host_flags |= ATA_FLAG_SLAVE_POSS;
- port_info[pata_chan] = &piix_port_info[ich5_pata];
-
- dev_printk(KERN_WARNING, &pdev->dev,
- "combined mode detected (p=%u, s=%u)\n",
- pata_chan, sata_chan);
- }
if (piix_check_450nx_errata(pdev)) {
/* This writes into the master table but it does not
really matter for this errata as we will apply it to
all the PIIX devices on the board */
- port_info[0]->mwdma_mask = 0;
- port_info[0]->udma_mask = 0;
- port_info[1]->mwdma_mask = 0;
- port_info[1]->udma_mask = 0;
+ port_info[0].mwdma_mask = 0;
+ port_info[0].udma_mask = 0;
+ port_info[1].mwdma_mask = 0;
+ port_info[1].udma_mask = 0;
}
- return ata_pci_init_one(pdev, port_info, 2);
+ return ata_pci_init_one(pdev, ppinfo, 2);
}
static int __init piix_init(void)