*
*/
-#include <linux/pci.h>
#include <scsi/scsi_host.h>
#include "aic94xx.h"
| CURRENT_SPINUP_HOLD | CURRENT_GTO_TIMEOUT \
| CURRENT_OOB_ERROR)
-static inline void get_lrate_mode(struct asd_phy *phy, u8 oob_mode)
+static void get_lrate_mode(struct asd_phy *phy, u8 oob_mode)
{
struct sas_phy *sas_phy = phy->sas_phy.phy;
phy->sas_phy.oob_mode = SATA_OOB_MODE;
}
-static inline void asd_phy_event_tasklet(struct asd_ascb *ascb,
+static void asd_phy_event_tasklet(struct asd_ascb *ascb,
struct done_list_struct *dl)
{
struct asd_ha_struct *asd_ha = ascb->ha;
}
/* If phys are enabled sparsely, this will do the right thing. */
-static inline unsigned ord_phy(struct asd_ha_struct *asd_ha,
- struct asd_phy *phy)
+static unsigned ord_phy(struct asd_ha_struct *asd_ha, struct asd_phy *phy)
{
u8 enabled_mask = asd_ha->hw_prof.enabled_phys;
int i, k = 0;
* LOCKING: the frame_rcvd_lock needs to be held since this parses the frame
* buffer.
*/
-static inline void asd_get_attached_sas_addr(struct asd_phy *phy, u8 *sas_addr)
+static void asd_get_attached_sas_addr(struct asd_phy *phy, u8 *sas_addr)
{
if (phy->sas_phy.frame_rcvd[0] == 0x34
&& phy->sas_phy.oob_mode == SATA_OOB_MODE) {
spin_unlock_irqrestore(&asd_ha->asd_ports_lock, flags);
}
-static inline void asd_bytes_dmaed_tasklet(struct asd_ascb *ascb,
- struct done_list_struct *dl,
- int edb_id, int phy_id)
+static void asd_bytes_dmaed_tasklet(struct asd_ascb *ascb,
+ struct done_list_struct *dl,
+ int edb_id, int phy_id)
{
unsigned long flags;
int edb_el = edb_id + ascb->edb_index;
sas_ha->notify_port_event(&phy->sas_phy, PORTE_BYTES_DMAED);
}
-static inline void asd_link_reset_err_tasklet(struct asd_ascb *ascb,
- struct done_list_struct *dl,
- int phy_id)
+static void asd_link_reset_err_tasklet(struct asd_ascb *ascb,
+ struct done_list_struct *dl,
+ int phy_id)
{
struct asd_ha_struct *asd_ha = ascb->ha;
struct sas_ha_struct *sas_ha = &asd_ha->sas_ha;
;
}
-static inline void asd_primitive_rcvd_tasklet(struct asd_ascb *ascb,
- struct done_list_struct *dl,
- int phy_id)
+static void asd_primitive_rcvd_tasklet(struct asd_ascb *ascb,
+ struct done_list_struct *dl,
+ int phy_id)
{
unsigned long flags;
struct sas_ha_struct *sas_ha = &ascb->ha->sas_ha;
tc_abort = le16_to_cpu(tc_abort);
list_for_each_entry_safe(a, b, &asd_ha->seq.pend_q, list) {
- struct sas_task *task = ascb->uldd_task;
+ struct sas_task *task = a->uldd_task;
+
+ if (a->tc_index != tc_abort)
+ continue;
- if (task && a->tc_index == tc_abort) {
+ if (task) {
failed_dev = task->dev;
sas_task_abort(task);
- break;
+ } else {
+ ASD_DPRINTK("R_T_A for non TASK scb 0x%x\n",
+ a->scb->header.opcode);
}
+ break;
}
if (!failed_dev) {
* that the EH will wake up and do something.
*/
list_for_each_entry_safe(a, b, &asd_ha->seq.pend_q, list) {
- struct sas_task *task = ascb->uldd_task;
+ struct sas_task *task = a->uldd_task;
if (task &&
task->dev == failed_dev &&
asd_ascb_free(ascb);
}
-static inline void set_speed_mask(u8 *speed_mask, struct asd_phy_desc *pd)
+static void set_speed_mask(u8 *speed_mask, struct asd_phy_desc *pd)
{
/* disable all speeds, then enable defaults */
*speed_mask = SAS_SPEED_60_DIS | SAS_SPEED_30_DIS | SAS_SPEED_15_DIS
/* initiator port settings are in the hi nibble */
if (phy->sas_phy.role == PHY_ROLE_INITIATOR)
- control_phy->port_type = SAS_PROTO_ALL << 4;
+ control_phy->port_type = SAS_PROTOCOL_ALL << 4;
else if (phy->sas_phy.role == PHY_ROLE_TARGET)
- control_phy->port_type = SAS_PROTO_ALL;
+ control_phy->port_type = SAS_PROTOCOL_ALL;
else
control_phy->port_type =
- (SAS_PROTO_ALL << 4) | SAS_PROTO_ALL;
+ (SAS_PROTOCOL_ALL << 4) | SAS_PROTOCOL_ALL;
/* link reset retries, this should be nominal */
control_phy->link_reset_retries = 10;
/* ---------- INITIATE LINK ADM TASK ---------- */
+#if 0
+
static void link_adm_tasklet_complete(struct asd_ascb *ascb,
struct done_list_struct *dl)
{
ascb->tasklet_complete = link_adm_tasklet_complete;
}
+#endif /* 0 */
+
/* ---------- SCB timer ---------- */
/**