[SCSI] Initial Commit of qla4xxx

[linux-2.6] / drivers / scsi / Kconfig

diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig
index a6f920d218a0266844b4e0819f3fbc75b124dffe..3ff5ec8f0d3178a8c2f0818adae57a5c6a64c639 100644 (file)
--- a/drivers/scsi/Kconfig
+++ b/drivers/scsi/Kconfig
@@ -494,67 +494,6 @@ config SCSI_ARCMSR
 
 source "drivers/scsi/megaraid/Kconfig.megaraid"
 
-config SCSI_SATA
-       tristate "Serial ATA (SATA) support"
-       depends on SCSI
-       help
-         This driver family supports Serial ATA host controllers
-         and devices.
-
-         If unsure, say N.
-
-config SCSI_SATA_AHCI
-       tristate "AHCI SATA support"
-       depends on SCSI_SATA && PCI
-       help
-         This option enables support for AHCI Serial ATA.
-
-         If unsure, say N.
-
-config SCSI_SATA_SVW
-       tristate "ServerWorks Frodo / Apple K2 SATA support"
-       depends on SCSI_SATA && PCI
-       help
-         This option enables support for Broadcom/Serverworks/Apple K2
-         SATA support.
-
-         If unsure, say N.
-
-config SCSI_ATA_PIIX
-       tristate "Intel PIIX/ICH SATA support"
-       depends on SCSI_SATA && PCI
-       help
-         This option enables support for ICH5/6/7/8 Serial ATA.
-         If PATA support was enabled previously, this enables
-         support for select Intel PIIX/ICH PATA host controllers.
-
-         If unsure, say N.
-
-config SCSI_SATA_MV
-       tristate "Marvell SATA support (HIGHLY EXPERIMENTAL)"
-       depends on SCSI_SATA && PCI && EXPERIMENTAL
-       help
-         This option enables support for the Marvell Serial ATA family.
-         Currently supports 88SX[56]0[48][01] chips.
-
-         If unsure, say N.
-
-config SCSI_SATA_NV
-       tristate "NVIDIA SATA support"
-       depends on SCSI_SATA && PCI && EXPERIMENTAL
-       help
-         This option enables support for NVIDIA Serial ATA.
-
-         If unsure, say N.
-
-config SCSI_PDC_ADMA
-       tristate "Pacific Digital ADMA support"
-       depends on SCSI_SATA && PCI
-       help
-         This option enables support for Pacific Digital ADMA controllers
-
-         If unsure, say N.
-
 config SCSI_HPTIOP
        tristate "HighPoint RocketRAID 3xxx Controller support"
        depends on SCSI && PCI
@@ -565,83 +504,6 @@ config SCSI_HPTIOP
          To compile this driver as a module, choose M here; the module
          will be called hptiop. If unsure, say N.
 
-config SCSI_SATA_QSTOR
-       tristate "Pacific Digital SATA QStor support"
-       depends on SCSI_SATA && PCI
-       help
-         This option enables support for Pacific Digital Serial ATA QStor.
-
-         If unsure, say N.
-
-config SCSI_SATA_PROMISE
-       tristate "Promise SATA TX2/TX4 support"
-       depends on SCSI_SATA && PCI
-       help
-         This option enables support for Promise Serial ATA TX2/TX4.
-
-         If unsure, say N.
-
-config SCSI_SATA_SX4
-       tristate "Promise SATA SX4 support"
-       depends on SCSI_SATA && PCI && EXPERIMENTAL
-       help
-         This option enables support for Promise Serial ATA SX4.
-
-         If unsure, say N.
-
-config SCSI_SATA_SIL
-       tristate "Silicon Image SATA support"
-       depends on SCSI_SATA && PCI && EXPERIMENTAL
-       help
-         This option enables support for Silicon Image Serial ATA.
-
-         If unsure, say N.
-
-config SCSI_SATA_SIL24
-       tristate "Silicon Image 3124/3132 SATA support"
-       depends on SCSI_SATA && PCI && EXPERIMENTAL
-       help
-         This option enables support for Silicon Image 3124/3132 Serial ATA.
-
-         If unsure, say N.
-
-config SCSI_SATA_SIS
-       tristate "SiS 964/180 SATA support"
-       depends on SCSI_SATA && PCI && EXPERIMENTAL
-       help
-         This option enables support for SiS Serial ATA 964/180.
-
-         If unsure, say N.
-
-config SCSI_SATA_ULI
-       tristate "ULi Electronics SATA support"
-       depends on SCSI_SATA && PCI && EXPERIMENTAL
-       help
-         This option enables support for ULi Electronics SATA.
-
-         If unsure, say N.
-
-config SCSI_SATA_VIA
-       tristate "VIA SATA support"
-       depends on SCSI_SATA && PCI
-       help
-         This option enables support for VIA Serial ATA.
-
-         If unsure, say N.
-
-config SCSI_SATA_VITESSE
-       tristate "VITESSE VSC-7174 / INTEL 31244 SATA support"
-       depends on SCSI_SATA && PCI
-       help
-         This option enables support for Vitesse VSC7174 and Intel 31244 Serial ATA.
-
-         If unsure, say N.
-
-config SCSI_SATA_INTEL_COMBINED
-       bool
-       depends on IDE=y && !BLK_DEV_IDE_SATA && (SCSI_SATA_AHCI || SCSI_ATA_PIIX)
-       default y
-
 config SCSI_BUSLOGIC
        tristate "BusLogic SCSI support"
        depends on (PCI || ISA || MCA) && SCSI && ISA_DMA_API
@@ -1152,7 +1014,7 @@ config SCSI_SYM53C8XX_MMIO
 
 config SCSI_IPR
        tristate "IBM Power Linux RAID adapter support"
-       depends on PCI && SCSI
+       depends on PCI && SCSI && ATA
        select FW_LOADER
        ---help---
          This driver supports the IBM Power Linux family RAID adapters.
@@ -1382,6 +1244,7 @@ config SCSI_QLOGICPTI
          module will be called qlogicpti.
 
 source "drivers/scsi/qla2xxx/Kconfig"
+source "drivers/scsi/qla4xxx/Kconfig"
 
 config SCSI_LPFC
        tristate "Emulex LightPulse Fibre Channel Support"
@@ -1398,8 +1261,8 @@ config SCSI_SEAGATE
          These are 8-bit SCSI controllers; the ST-01 is also supported by
          this driver.  It is explained in section 3.9 of the SCSI-HOWTO,
          available from <http://www.tldp.org/docs.html#howto>.  If it
-         doesn't work out of the box, you may have to change some settings in
-         <file:drivers/scsi/seagate.h>.
+         doesn't work out of the box, you may have to change some macros at
+         compiletime, which are described in <file:drivers/scsi/seagate.c>.
 
          To compile this driver as a module, choose M here: the
          module will be called seagate.