#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/interrupt.h>
-#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <asm/mach-types.h>
#include <asm/hardware.h>
#include <asm/irq.h>
#include <asm/hardware/scoop.h>
-#include <asm/arch/pxa-regs.h>
+#ifdef CONFIG_SA1100_COLLIE
+#include <asm/arch-sa1100/collie.h>
+#else
+#include <asm/arch-pxa/pxa-regs.h>
+#endif
#include "soc_common.h"
{
int ret;
+#ifndef CONFIG_SA1100_COLLIE
/*
* Setup default state of GPIO outputs
* before we enable them as outputs.
pxa_gpio_mode(GPIO55_nPREG_MD);
pxa_gpio_mode(GPIO56_nPWAIT_MD);
pxa_gpio_mode(GPIO57_nIOIS16_MD);
+#endif
/* Register interrupts */
if (scoop_devs[skt->nr].cd_irq >= 0) {
write_scoop_reg(scoop_devs[skt->nr].dev, SCOOP_IMR, 0x00C0);
write_scoop_reg(scoop_devs[skt->nr].dev, SCOOP_MCR, 0x0101);
scoop_devs[skt->nr].keep_vs = NO_KEEP_VS;
+
+ if (machine_is_collie())
+ /* We need to disable SS_OUTPUT_ENA here. */
+ write_scoop_reg(scoop_devs[skt->nr].dev, SCOOP_CPR, read_scoop_reg(scoop_devs[skt->nr].dev, SCOOP_CPR) & ~0x0080);
}
static void sharpsl_pcmcia_socket_suspend(struct soc_pcmcia_socket *skt)
{
/* CF_BUS_OFF */
sharpsl_pcmcia_init_reset(&scoop_devs[skt->nr]);
+
+ if (machine_is_collie())
+ /* We need to disable SS_OUTPUT_ENA here. */
+ write_scoop_reg(scoop_devs[skt->nr].dev, SCOOP_CPR, read_scoop_reg(scoop_devs[skt->nr].dev, SCOOP_CPR) & ~0x0080);
}
static struct pcmcia_low_level sharpsl_pcmcia_ops = {
static struct platform_device *sharpsl_pcmcia_device;
+#ifdef CONFIG_SA1100_COLLIE
+int __init pcmcia_collie_init(struct device *dev)
+{
+ int ret = -ENODEV;
+
+ if (machine_is_collie())
+ ret = sa11xx_drv_pcmcia_probe(dev, &sharpsl_pcmcia_ops, 0, 1);
+
+ return ret;
+}
+
+#else
+
static int __init sharpsl_pcmcia_init(void)
{
int ret;
fs_initcall(sharpsl_pcmcia_init);
module_exit(sharpsl_pcmcia_exit);
+#endif
MODULE_DESCRIPTION("Sharp SL Series PCMCIA Support");
MODULE_LICENSE("GPL");