#include <linux/moduleparam.h>
#include <linux/init.h>
#include <linux/kernel.h>
-#include <linux/config.h>
#include <linux/string.h>
#include <linux/major.h>
#include <linux/errno.h>
list_for_each_entry(socket, &pcmcia_socket_list, socket_list) {
if (socket->dev.dev != dev)
continue;
- down(&socket->skt_sem);
+ mutex_lock(&socket->skt_mutex);
socket_suspend(socket);
- up(&socket->skt_sem);
+ mutex_unlock(&socket->skt_mutex);
}
up_read(&pcmcia_socket_list_rwsem);
list_for_each_entry(socket, &pcmcia_socket_list, socket_list) {
if (socket->dev.dev != dev)
continue;
- down(&socket->skt_sem);
+ mutex_lock(&socket->skt_mutex);
socket_resume(socket);
- up(&socket->skt_sem);
+ mutex_unlock(&socket->skt_mutex);
}
up_read(&pcmcia_socket_list_rwsem);
init_completion(&socket->socket_released);
init_completion(&socket->thread_done);
init_waitqueue_head(&socket->thread_wait);
- init_MUTEX(&socket->skt_sem);
+ mutex_init(&socket->skt_mutex);
spin_lock_init(&socket->thread_lock);
ret = kernel_thread(pccardd, socket, CLONE_KERNEL);
}
EXPORT_SYMBOL(pcmcia_get_socket_by_nr);
-
-/**
- * socket_setup() and shutdown_socket() are called by the main event
- * handler when card insertion and removal events are received.
- * socket_setup() turns on socket power and resets the socket, in two stages.
- * shutdown_socket() unconfigures a socket and turns off socket power.
- */
-static void shutdown_socket(struct pcmcia_socket *s)
-{
- cs_dbg(s, 1, "shutdown_socket\n");
-
- /* Blank out the socket state */
- s->socket = dead_socket;
- s->ops->init(s);
- s->ops->set_socket(s, &s->socket);
- s->irq.AssignedIRQ = s->irq.Config = 0;
- s->lock_count = 0;
- destroy_cis_cache(s);
-#ifdef CONFIG_CARDBUS
- cb_free(s);
-#endif
- s->functions = 0;
- kfree(s->config);
- s->config = NULL;
-
- {
- int status;
- s->ops->get_status(s, &status);
- if (status & SS_POWERON) {
- printk(KERN_ERR "PCMCIA: socket %p: *** DANGER *** unable to remove socket power\n", s);
- }
- }
-} /* shutdown_socket */
-
-
/**
* The central event handler. Send_event() sends an event to the
* 16-bit subsystem, which then calls the relevant device drivers.
send_event(skt, CS_EVENT_CARD_REMOVAL, CS_EVENT_PRI_HIGH);
}
-static void socket_shutdown(struct pcmcia_socket *skt)
-{
- cs_dbg(skt, 4, "shutdown\n");
-
- socket_remove_drivers(skt);
- skt->state &= SOCKET_INUSE|SOCKET_PRESENT;
- msleep(shutdown_delay * 10);
- skt->state &= SOCKET_INUSE;
- shutdown_socket(skt);
-}
-
static int socket_reset(struct pcmcia_socket *skt)
{
int status, i;
return CS_GENERAL_FAILURE;
}
+/**
+ * socket_setup() and socket_shutdown() are called by the main event handler
+ * when card insertion and removal events are received.
+ * socket_setup() turns on socket power and resets the socket, in two stages.
+ * socket_shutdown() unconfigures a socket and turns off socket power.
+ */
+static void socket_shutdown(struct pcmcia_socket *s)
+{
+ int status;
+
+ cs_dbg(s, 4, "shutdown\n");
+
+ socket_remove_drivers(s);
+ s->state &= SOCKET_INUSE | SOCKET_PRESENT;
+ msleep(shutdown_delay * 10);
+ s->state &= SOCKET_INUSE;
+
+ /* Blank out the socket state */
+ s->socket = dead_socket;
+ s->ops->init(s);
+ s->ops->set_socket(s, &s->socket);
+ s->irq.AssignedIRQ = s->irq.Config = 0;
+ s->lock_count = 0;
+ destroy_cis_cache(s);
+#ifdef CONFIG_CARDBUS
+ cb_free(s);
+#endif
+ s->functions = 0;
+
+ s->ops->get_status(s, &status);
+ if (status & SS_POWERON) {
+ printk(KERN_ERR "PCMCIA: socket %p: *** DANGER *** unable to remove socket power\n", s);
+ }
+
+ cs_socket_put(s);
+}
+
static int socket_setup(struct pcmcia_socket *skt, int initial_delay)
{
int status, i;
send_event(skt, CS_EVENT_CARD_INSERTION, CS_EVENT_PRI_LOW);
} else {
socket_shutdown(skt);
- cs_socket_put(skt);
}
return ret;
}
} else {
socket_shutdown(skt);
- cs_socket_put(skt);
}
skt->state &= ~SOCKET_SUSPEND;
{
printk(KERN_NOTICE "pccard: card ejected from slot %d\n", skt->sock);
socket_shutdown(skt);
- cs_socket_put(skt);
}
/*
spin_unlock_irqrestore(&skt->thread_lock, flags);
if (events) {
- down(&skt->skt_sem);
+ mutex_lock(&skt->skt_mutex);
if (events & SS_DETECT)
socket_detect_change(skt);
if (events & SS_BATDEAD)
send_event(skt, CS_EVENT_BATTERY_LOW, CS_EVENT_PRI_LOW);
if (events & SS_READY)
send_event(skt, CS_EVENT_READY_CHANGE, CS_EVENT_PRI_LOW);
- up(&skt->skt_sem);
+ mutex_unlock(&skt->skt_mutex);
continue;
}
{
int ret = 0;
- /* s->skt_sem also protects s->callback */
- down(&s->skt_sem);
+ /* s->skt_mutex also protects s->callback */
+ mutex_lock(&s->skt_mutex);
if (c) {
/* registration */
} else
s->callback = NULL;
err:
- up(&s->skt_sem);
+ mutex_unlock(&s->skt_mutex);
return ret;
}
cs_dbg(skt, 1, "resetting socket\n");
- down(&skt->skt_sem);
+ mutex_lock(&skt->skt_mutex);
do {
if (!(skt->state & SOCKET_PRESENT)) {
ret = CS_NO_CARD;
ret = CS_SUCCESS;
} while (0);
- up(&skt->skt_sem);
+ mutex_unlock(&skt->skt_mutex);
return ret;
} /* reset_card */
cs_dbg(skt, 1, "suspending socket\n");
- down(&skt->skt_sem);
+ mutex_lock(&skt->skt_mutex);
do {
if (!(skt->state & SOCKET_PRESENT)) {
ret = CS_NO_CARD;
}
ret = socket_suspend(skt);
} while (0);
- up(&skt->skt_sem);
+ mutex_unlock(&skt->skt_mutex);
return ret;
} /* suspend_card */
cs_dbg(skt, 1, "waking up socket\n");
- down(&skt->skt_sem);
+ mutex_lock(&skt->skt_mutex);
do {
if (!(skt->state & SOCKET_PRESENT)) {
ret = CS_NO_CARD;
if (!ret && skt->callback)
skt->callback->resume(skt);
} while (0);
- up(&skt->skt_sem);
+ mutex_unlock(&skt->skt_mutex);
return ret;
} /* resume_card */
cs_dbg(skt, 1, "user eject request\n");
- down(&skt->skt_sem);
+ mutex_lock(&skt->skt_mutex);
do {
if (!(skt->state & SOCKET_PRESENT)) {
ret = -ENODEV;
socket_remove(skt);
ret = 0;
} while (0);
- up(&skt->skt_sem);
+ mutex_unlock(&skt->skt_mutex);
return ret;
} /* eject_card */
cs_dbg(skt, 1, "user insert request\n");
- down(&skt->skt_sem);
+ mutex_lock(&skt->skt_mutex);
do {
if (skt->state & SOCKET_PRESENT) {
ret = -EBUSY;
}
ret = 0;
} while (0);
- up(&skt->skt_sem);
+ mutex_unlock(&skt->skt_mutex);
return ret;
} /* insert_card */
projects / linux-2.6 / blobdiff