#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/types.h>
-#include <linux/smp_lock.h>
#include <linux/pci.h>
#include <linux/workqueue.h>
#include "../pci.h"
#include "shpchp.h"
-static void interrupt_event_handler(void *data);
+static void interrupt_event_handler(struct work_struct *work);
static int shpchp_enable_slot(struct slot *p_slot);
static int shpchp_disable_slot(struct slot *p_slot);
info->event_type = event_type;
info->p_slot = p_slot;
- INIT_WORK(&info->work, interrupt_event_handler, info);
+ INIT_WORK(&info->work, interrupt_event_handler);
schedule_work(&info->work);
return 0;
}
-u8 shpchp_handle_attention_button(u8 hp_slot, void *inst_id)
+u8 shpchp_handle_attention_button(u8 hp_slot, struct controller *ctrl)
{
- struct controller *ctrl = (struct controller *) inst_id;
struct slot *p_slot;
u32 event_type;
/* Attention Button Change */
dbg("shpchp: Attention button interrupt received.\n");
-
+
p_slot = shpchp_find_slot(ctrl, hp_slot + ctrl->slot_device_offset);
p_slot->hpc_ops->get_adapter_status(p_slot, &(p_slot->presence_save));
/*
* Button pressed - See if need to TAKE ACTION!!!
*/
- info("Button pressed on Slot(%d)\n", ctrl->first_slot + hp_slot);
+ info("Button pressed on Slot(%s)\n", p_slot->name);
event_type = INT_BUTTON_PRESS;
queue_interrupt_event(p_slot, event_type);
}
-u8 shpchp_handle_switch_change(u8 hp_slot, void *inst_id)
+u8 shpchp_handle_switch_change(u8 hp_slot, struct controller *ctrl)
{
- struct controller *ctrl = (struct controller *) inst_id;
struct slot *p_slot;
u8 getstatus;
u32 event_type;
/*
* Switch opened
*/
- info("Latch open on Slot(%d)\n", ctrl->first_slot + hp_slot);
+ info("Latch open on Slot(%s)\n", p_slot->name);
event_type = INT_SWITCH_OPEN;
if (p_slot->pwr_save && p_slot->presence_save) {
event_type = INT_POWER_FAULT;
/*
* Switch closed
*/
- info("Latch close on Slot(%d)\n", ctrl->first_slot + hp_slot);
+ info("Latch close on Slot(%s)\n", p_slot->name);
event_type = INT_SWITCH_CLOSE;
}
return 1;
}
-u8 shpchp_handle_presence_change(u8 hp_slot, void *inst_id)
+u8 shpchp_handle_presence_change(u8 hp_slot, struct controller *ctrl)
{
- struct controller *ctrl = (struct controller *) inst_id;
struct slot *p_slot;
u32 event_type;
p_slot = shpchp_find_slot(ctrl, hp_slot + ctrl->slot_device_offset);
- /*
+ /*
* Save the presence state
*/
p_slot->hpc_ops->get_adapter_status(p_slot, &(p_slot->presence_save));
/*
* Card Present
*/
- info("Card present on Slot(%d)\n", ctrl->first_slot + hp_slot);
+ info("Card present on Slot(%s)\n", p_slot->name);
event_type = INT_PRESENCE_ON;
} else {
/*
* Not Present
*/
- info("Card not present on Slot(%d)\n", ctrl->first_slot + hp_slot);
+ info("Card not present on Slot(%s)\n", p_slot->name);
event_type = INT_PRESENCE_OFF;
}
return 1;
}
-u8 shpchp_handle_power_fault(u8 hp_slot, void *inst_id)
+u8 shpchp_handle_power_fault(u8 hp_slot, struct controller *ctrl)
{
- struct controller *ctrl = (struct controller *) inst_id;
struct slot *p_slot;
u32 event_type;
/*
* Power fault Cleared
*/
- info("Power fault cleared on Slot(%d)\n", ctrl->first_slot + hp_slot);
+ info("Power fault cleared on Slot(%s)\n", p_slot->name);
p_slot->status = 0x00;
event_type = INT_POWER_FAULT_CLEAR;
} else {
/*
* Power fault
*/
- info("Power fault on Slot(%d)\n", ctrl->first_slot + hp_slot);
+ info("Power fault on Slot(%s)\n", p_slot->name);
event_type = INT_POWER_FAULT;
/* set power fault status for this board */
p_slot->status = 0xFF;
return 1;
}
-/* The following routines constitute the bulk of the
+/* The following routines constitute the bulk of the
hotplug controller logic
*/
static int change_bus_speed(struct controller *ctrl, struct slot *p_slot,
enum pci_bus_speed speed)
-{
+{
int rc = 0;
dbg("%s: change to speed %d\n", __FUNCTION__, speed);
static int fix_bus_speed(struct controller *ctrl, struct slot *pslot,
u8 flag, enum pci_bus_speed asp, enum pci_bus_speed bsp,
enum pci_bus_speed msp)
-{
+{
int rc = 0;
/*
err("%s: Failed to power on slot\n", __FUNCTION__);
return -1;
}
-
+
if ((ctrl->pci_dev->vendor == 0x8086) && (ctrl->pci_dev->device == 0x0332)) {
if (slots_not_empty)
return WRONG_BUS_FREQUENCY;
-
+
if ((rc = p_slot->hpc_ops->set_bus_speed_mode(p_slot, PCI_SPEED_33MHz))) {
err("%s: Issue of set bus speed mode command failed\n", __FUNCTION__);
return WRONG_BUS_FREQUENCY;
}
-
+
/* turn on board, blink green LED, turn off Amber LED */
if ((rc = p_slot->hpc_ops->slot_enable(p_slot))) {
err("%s: Issue of Slot Enable command failed\n", __FUNCTION__);
return rc;
}
}
-
+
rc = p_slot->hpc_ops->get_adapter_speed(p_slot, &asp);
if (rc) {
err("%s: Can't get adapter speed or bus mode mismatch\n",
err("%s: Issue of Slot Disable command failed\n", __FUNCTION__);
return rc;
}
-
+
rc = p_slot->hpc_ops->set_attention_status(p_slot, 0);
if (rc) {
err("%s: Issue of Set Attention command failed\n", __FUNCTION__);
* Handles all pending events and exits.
*
*/
-static void shpchp_pushbutton_thread(void *data)
+static void shpchp_pushbutton_thread(struct work_struct *work)
{
- struct pushbutton_work_info *info = data;
+ struct pushbutton_work_info *info =
+ container_of(work, struct pushbutton_work_info, work);
struct slot *p_slot = info->p_slot;
mutex_lock(&p_slot->lock);
kfree(info);
}
-void queue_pushbutton_work(void *data)
+void shpchp_queue_pushbutton_work(struct work_struct *work)
{
- struct slot *p_slot = data;
+ struct slot *p_slot = container_of(work, struct slot, work.work);
struct pushbutton_work_info *info;
info = kmalloc(sizeof(*info), GFP_KERNEL);
return;
}
info->p_slot = p_slot;
- INIT_WORK(&info->work, shpchp_pushbutton_thread, info);
+ INIT_WORK(&info->work, shpchp_pushbutton_thread);
mutex_lock(&p_slot->lock);
switch (p_slot->state) {
p_slot->hpc_ops->get_power_status(p_slot, &getstatus);
if (getstatus) {
p_slot->state = BLINKINGOFF_STATE;
- info(msg_button_off, p_slot->number);
+ info("PCI slot #%s - powering off due to button "
+ "press.\n", p_slot->name);
} else {
p_slot->state = BLINKINGON_STATE;
- info(msg_button_on, p_slot->number);
+ info("PCI slot #%s - powering on due to button "
+ "press.\n", p_slot->name);
}
/* blink green LED and turn off amber */
p_slot->hpc_ops->green_led_blink(p_slot);
else
p_slot->hpc_ops->green_led_off(p_slot);
p_slot->hpc_ops->set_attention_status(p_slot, 0);
- info(msg_button_cancel, p_slot->number);
+ info("PCI slot #%s - action canceled due to button press\n",
+ p_slot->name);
p_slot->state = STATIC_STATE;
break;
case POWEROFF_STATE:
}
}
-static void interrupt_event_handler(void *data)
+static void interrupt_event_handler(struct work_struct *work)
{
- struct event_info *info = data;
+ struct event_info *info = container_of(work, struct event_info, work);
struct slot *p_slot = info->p_slot;
mutex_lock(&p_slot->lock);
mutex_lock(&p_slot->ctrl->crit_sect);
rc = p_slot->hpc_ops->get_adapter_status(p_slot, &getstatus);
if (rc || !getstatus) {
- info("%s: no adapter on slot(%x)\n", __FUNCTION__, p_slot->number);
+ info("No adapter on slot(%s)\n", p_slot->name);
goto out;
}
rc = p_slot->hpc_ops->get_latch_status(p_slot, &getstatus);
if (rc || getstatus) {
- info("%s: latch open on slot(%x)\n", __FUNCTION__, p_slot->number);
+ info("Latch open on slot(%s)\n", p_slot->name);
goto out;
}
rc = p_slot->hpc_ops->get_power_status(p_slot, &getstatus);
if (rc || getstatus) {
- info("%s: already enabled on slot(%x)\n", __FUNCTION__, p_slot->number);
+ info("Already enabled on slot(%s)\n", p_slot->name);
goto out;
}
rc = p_slot->hpc_ops->get_adapter_status(p_slot, &getstatus);
if (rc || !getstatus) {
- info("%s: no adapter on slot(%x)\n", __FUNCTION__, p_slot->number);
+ info("No adapter on slot(%s)\n", p_slot->name);
goto out;
}
rc = p_slot->hpc_ops->get_latch_status(p_slot, &getstatus);
if (rc || getstatus) {
- info("%s: latch open on slot(%x)\n", __FUNCTION__, p_slot->number);
+ info("Latch open on slot(%s)\n", p_slot->name);
goto out;
}
rc = p_slot->hpc_ops->get_power_status(p_slot, &getstatus);
if (rc || !getstatus) {
- info("%s: already disabled slot(%x)\n", __FUNCTION__, p_slot->number);
+ info("Already disabled slot(%s)\n", p_slot->name);
goto out;
}